Hardware and software architecture for power quality analysis

This paper presents a novel concept for power quality hardware and software architecture. Software tools related to detection, classification and characterization of power quality events can be integrated into a Distribution Control Center in which the interconnection between different subsystems is being carried out through the Internet allowing flexibility to the system. This system is implemented using wavelet analysis applied in all proposed algorithms. Different power quality events are taken as examples to illustrate the capabilities of the proposed method. The obtained results reveal that the proposed architecture is feasible to be implemented as an integral part of a control center system.The proposed system has the property of fast and accurate detection and classification of any power quality disturbance event and introduces a new PQ index determination that allows characterizing any type of disturbance including the non-periodic signals.     

Dielectric Resonators for the Measurement of Superconductor Thin Films Surface Impedance in Magnetic Fields at High Microwave Frequencies

We present the design and realization of cylindrical dielectric resonators operating in the 40–60 GHz frequency range, designed for the measurement of the surface resistance and of the surface reactance shift in High-T _c Superconductors (HTS) thin films in a dc magnetic field. The resonators are single tone, based on the TE ₀₁₁ mode, and multiple tone, the latter allowing in principle to exploit the simultaneous determination of the surface impedance at different frequencies. As an application example, we report the temperature and field dependencies of the effective surface impedance of some cuprate superconductors thin films. The results are compared with those obtained through the use of a standard metal cavity with a similar Q-factor and operating in the same frequency range. The comparison highlights a superior stability and a higher sensitivity, resulting in an increase of about two orders of magnitude in the resolution of the surface impedance measurement. By contrast, the dissipative part of the superconducting transition (above T/T _c = 0.97) is better studied with the metal cavity. We also present measurements in the vortex state in YBaCa₂Cu₃O_7−δ and Tl₂Ba₂CaCu₂O_8+x that show significantly different physics. PACS: 74.25 Nf.     

Qualitative features of matrix pencils and DAEs arising in circuit dynamics

The dynamical behaviour of nonlinear electrical circuits is usually modelled in the time domain by differential-algebraic equations (DAEs). The differential-algebraic formalism drives qualitative analyses based on linearization to a matrix pencil setting. In this context, the present paper performs a spectral analysis of matrix pencils and DAEs arising in nonlinear circuit theory. Specifically, the non-singularity, hyperbolicity and asymptotic stability of equilibria are addressed in terms of circuit topology. The differential-algebraic framework puts the results beyond those already known for state-space models, unfeasible in many actual problems. The topological conditions arising in this qualitative study are proved independent of those supporting the index, and therefore they apply to both index-1 and index-2 configurations. The approach illustrates how graph theory, matrix analysis and DAE theory interact in the dynamical study of nonlinear circuits.     

Thermodynamic calculations for Nb-containing high-speed steels and white-cast-iron alloys

Thermodynamical equilibria have been calculated for a wide variety of high-speed steel compositions belonging to the multicomponent system Fe-C-W-Mo-V-Cr-Nb as well as for two series of white-cast-iron alloys containing niobium. Some temperature-concentration diagrams for both classes of alloys are presented and calculated quantities (melting and transformation temperatures, amounts and compositions of phases) are compared with experimental data. Good agreement between calculated and experimental information has been obtained, with the exception of the MC phase compositions and transformation temperatures for white-cast-iron alloys with high carbon and chromium contents. These differences can, however, be satisfactorily explained by plausible kinetic effects.     

Robustness issues in optimal control of unstable plants

This paper presents a robustness analysis of the optimal solution of the step tracking problem in a one-degree of freedom control architecture, for the discrete-time multivariable (MIMO) case. It is shown that the resulting closed loop becomes arbitrarily fragile, i.e. the sensitivity peak becomes arbitrarily large, for certain reference directions. The cause of this problem is that the optimal controller depends on the reference direction. The paper shows that this dependence can be eliminated with an alternative formulation of the optimal problem where the cost is averaged over all reference directions.     

The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Directed diffusion for wireless sensor networking

Advances in processor, memory, and radio technology enable small and cheap nodes capable of sensing, communication, and computation. Networks of such nodes can coordinate to perform distributed sensing of environmental phenomena. We explore the directed diffusion paradigm for such coordination. Directed diffusion is data-centric in that all communication is for named data. All nodes in a directed-diffusion-based network are application aware. This enables diffusion to achieve energy savings by selecting empirically good paths and by caching and processing data in-network (e.g., data aggregation). We explore and evaluate the use of directed diffusion for a simple remote-surveillance sensor network analytically and experimentally. Our evaluation indicates that directed diffusion can achieve significant energy savings and can outperform idealized traditional schemes (e.g., omniscient multicast) under the investigated scenarios.     

Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.