AODV的本地修复算法*

提出了一种新的路由本地修复算法,将修复尽量限制在断链的局部范围内,减少了修复时间和降低路由维护的开销, 且不用考虑失效链路在整个路由上的相对位置,均可对其进行修复,提高了处理失效链路的能力,有利于提高网络的可扩展性.仿真表明,这种新的路由本地修复算法明显地提高了网络多方面的性能.     

改进的基于AdaBoost算法的人脸检测方法*

针对传统AdaBoost算法的不足,分析了训练过程中出现的退化问题及样本权重扭曲的现象,并提出了解决这一问题的有效方法.该方法对样本权重的更新规则进行了适当的调整,即为每一轮循环设定一个权重更新阈值,根据样本是否被错误分类以及当前权重是否大于该阈值来更新样本权重,从而限制了困难样本权重的过分增大.使用该方法训练级联人脸检测器,试验结果表明,该方法较好地解决了传统AdaBoost算法所出现的退化问题,在保证检测率的同时降低了误检率.     

印刷线路板电镀废水综合治理

简述线路板电镀废水中氰、铜氨、油墨废水治理方法和混合废水综合治理工艺流程及原理。     

多传感器数据融合技术的现状及展望

阐述了多传感器数据融合的原理，对数据融合算法的研究动态进行了评述，指出了数据融合技术存在的问题，对今后的发展趋势进行了展望。     

Effect of sodium monofluorophosphate treatment on microstructure and frost salt scaling durability of slag cement paste

Sodium-monofluorophosphate (Na-MFP) is currently in use as a surface applied corrosion inhibitor in the concrete industry. Its basic mechanism is to protect the passive layer of the reinforcement steel against disruption due to carbonation. Carbonation is known as the most detrimental environmental effect on blast furnace slag cement (BFSC) concrete with respect to frost salt scaling. In this paper the effect of Na-MFP on the microstructure and frost salt scaling resistance of carbonated BFSC paste is presented. The results of electron microscopy, mercury intrusion porosimetry (MIP) and X-ray diffraction (XRD) are discussed. It is found that the treatment modifies the microstructure and improves the resistance of carbonated BFSC paste against frost salt attack.     

On the Fatty Acid Composition of Turkish Vegetable Oils

Because of the variety of climate conditions very different oil plants except of some tropical kinds grow in Turkey. In this work four groups of raw material of Turkish vegetable oils were investigated. The first group consists of olive, sunflower and cotton, which are important raw materials in Turkey. About 97% of the oil produced in Turkey base on these three raw materials. The second group consists of sesame, poppy, linseed, hemp-seed, rape, soyabean, safflower, castor bean and groundnut, which are temporary of lower importance for Turkey. The third group consists of the non-traditional oil raw materials like tobacco seed, grape seed, scabious, fig seed, tomato seed, laurel seed, pistacia terebinthus, rice bran, maize germs, anise seed, peach-stones and pumpkin seed. The fourth group consists of fruits rich in oil like hazel-nuts, walnuts, almonds and pistachio-nuts, whose production is of great importance in Turkey.     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.     

Large-scale SRAM-based IP lookup architectures using compact trie search structures

SRAM-based pipelined architectures for high-speed IP lookup using Field Programmable Gate Arrays (FPGAs) has recently attracted a great deal of attention from researchers. Due to the limited amount of on-chip memory and the number of I/O pins of FPGAs, compact data structures providing high memory efficiency are in great demand.     

Feedback control for multi-resource usage of virtualised database server

Virtualisation and cloud computing have recently received significant attention. Resource allocation and control of multiple resource usages among virtual machines in virtualised data centres remains an open problem. Therefore, in this paper, our focus is to control CPU (central processing unit) usage and memory consumption of a virtual database machine in a data centre under a time-varying heavy workload. In addition to existing work, we attempt to control multiple outputs, such as the CPU usage and memory consumption of a virtualised database server (DBVM), via changing multiple server parameters, such as the CPU allocation and memory allocation, in real time. We indicated that a virtualised database server might be modelled as a linear time-unvarying system. We obtained and compared both MIMO (multi input–multi output) and multiple SISO (single input–single output) models of that system. We designed multiple SISO feedback controllers to achieve desired CPU usages and memory consumptions under workload.