Synthesis and Analysis of Triphenylamine: A Review

In this paper, synthesis and characteristic of arylamine‐type molecules, particularly triphenylamine are discussed. An overview of the physical properties and chemical characteristics of these types of molecules is provided. Different synthesis methods and mechanisms involved for the production of these molecules and their analysis by HPLC are presented. Finally, a brief note about their purification is presented.     

A comparative study using direct hydrothermal and indirect fusion methods to produce zeolites from coal fly ash utilizing single-mode microwave energy

This paper investigates the effects of microwave irradiation on the synthesis of zeolite Na-A from coal fly ash at atmospheric pressure. Microwave irradiation has shown to accelerate zeolitization from several hours to several minutes. A single-mode laboratory-scale microwave was employed, which enabled control of irradiated power and temperature of the reaction mixture, while the pressure was controlled by affixing a condenser on the 40 mL Teflon reactor vessel with a working volume 20 mL. Design of Experiment was used to compare two methods of converting CFA to zeolite-A, direct hydrothermal method and indirect fusion method. Experiments conducted were two level four factorial designs. The first factor considered was the categorical factor of conversion method (hydrothermal vs fusion), while the other three factors investigated were power (P), time (θ), and aluminate concentration (δ). Zeolite produced from CFA (CFAZA) was characterized using XRD, FTIR, SEM, TGA, BET, and cation exchange capacity. It was observed that the crystallinity of the product was influenced by factors such as, conversion method, power, time, and aluminate concentration. The hydrothermal and fusion products were comparable to each other in their characteristics, however, hydrothermal CFAZA performed better at immobilizing heavy metal ions and showed better crystalline structure, whereas fusion CFAZA had a higher BET surface area and a slightly higher CEC. Regardless of the performance of the categorical factors the other factors, i.e., power, time, and aluminate concentration followed the same trend for both types of CFAZA.     

Dosimetric characteristic of a new 125I brachytherapy source

A new brachytherapy (125)I source has been investigated at Iranian Agricultural, Medical and Industrial Research School. Dosimetric characteristics [dose-rate constant Λ, radial dose function g(l)(r) and anisotropy function F(r,)] of IRA-(125)I were theoretically determined in terms of the updated AAPM task group 43 (TG-43U1) recommendations. Versions 5 and 4C of the Monte Carlo radiation transport code were used to calculate the dosimetry parameters around the source. The Monte Carlo calculated dose-rate constant of the (125)I source in water was found to be 92×10(-4) Gy h(-1) U(-1) with an approximate uncertainty of ±3 %. Brachytherapy seed model, 6711-(125)I, carrying (125)I radionuclides, was modelled and benchmarked against previously published values. Finally, the calculated results were compared with the published results of those of other source manufacturers.     

Quantitative determination of physical and chemical measurands in honey by near-infrared spectrometry

Fourier transform near-infrared spectroscopy (FT-NIR) was evaluated to quantitatively determine 24 different measurands in honey. The reference values of 421 honey samples of different botanical origins were determined by classical physical and chemical methods. Partial least squares regression was used to develop the calibration models for the measurands studied. These calibrations were then validated using independent samples and proved satisfying accuracies for the determination of water (standard error of prediction: 0.3 g/100 g), glucose (1.3 g/100 g), fructose (1.6 g/100 g), sucrose (0.4 g/100 g), total monosaccharide content (2.6 g/100 g) as well as fructose/glucose ratio (0.09) and glucose/water ratio (0.12). The prediction accuracy for hydroxymethylfurfural, proline, pH-value, electrical conductivity, free acidity and the minor sugars maltose, turanose, nigerose, erlose, trehalose, isomaltose, kojibiose, melezitose, raffinose, gentiobiose, melibiose, maltotriose was poor and unreliable. The results demonstrate that near-infrared spectrometry is a valuable, rapid and non-destructive tool for the quantitative analysis of some measurands related to the main components in honey.     

How many subjects to screen? A practical procedure for estimating multivariate normal probabilities for correlated variables.

Suggests a practical procedure for estimating the number of Ss that need to be screened to obtain a sample of fixed size that meets multiple correlated criteria. The procedure is based on the fact that least squares regression provides a good quadratic fit for Monte Carlo estimates of multivariate probabilities when they are plotted as a function of mean pairwise correlations (r) for the criterion variables. The equations given here can be used to predict selected 3- to 5-variable joint probabilities with reasonable accuracy as long as pairwise correlations for the selection criteria range from .10 to .90. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A novel silicon nanotips antireflection surface for the micro Sun sensor

We have developed a new technique to fabricate an antireflection surface using silicon nanotips for use on a micro Sun sensor for Mars rovers. We have achieved randomly distributed nanotips of radii spanning from 20 to 100 nm and aspect ratio of approximately 200 using a two-step dry etching process. The 30 degrees specular reflectance at the target wavelength of 1 microm is only about 0.09%, nearly 3 orders of magnitude lower than that of bare silicon, and the hemispherical reflectance is approximately 8%. When the density and aspect ratio of these nanotips are changed, a change in reflectance is demonstrated. When surfaces are covered with these nanotips, the critical problem of ghost images that are caused by multiple internal reflections in a micro Sun sensor was solved.     

Granulation of hydrophobic powders

Granulation of hydrophobic powders is frequently required in the pharmaceutical industry. The structural complexity of new drug molecules mean that is increasingly common for entire classes of drug compounds to be highly hydrophobic. This creates considerable difficulty in understanding, controlling and trouble-shooting these industrial granulation processes.There have been many recent advances in granulation theory. Essential to this theory is that wetting and spreading of the fluid through the powder particles is a prerequisite for good granulation. The possibility of a fine, hydrophobic powder spreading over the surface of the liquid during nucleation has been identified theoretically based on surface chemistry and as a potential nucleation mechanism. Recently, investigation confirmed that nucleation can occur by spreading of the sub-micron particles around the template drop to form a “liquid marble”. The hollow granule structure formed by the “solid-spreading” nucleation mechanism suggests the possibility of using the controlled, open granule structure to manufacture designer structured agglomerates with advantageous properties, including controlled granule structure and size and excellent ideal flow and handling properties. This paper describes single drop solid-spreading nucleation experiments where single fluid droplets are placed onto loosely packed powder beds of hydrophobic powders and the formation of the powder shell observed. Experimental results and observations for some model systems are presented, together with a preliminary framework for liquid marble formation.     

Ionic Liquids as Additives in Water-Based Lubricants: From Surface Adsorption to Tribofilm Formation

Tribology Letters - Thickener plays a significant role on the performance of grease, including rheological property, chemical and thermal stability, colloidal and mechanical stability, and so...     

Surface functionalized cadmium telluride quantum dots for the optical detection and determination of herbicides

An optical sensor for detection of herbicides was developed through the functionalization of CdTe quantum dots (CdTe-QDs) with cysteamine hydrochloride. The functionalized CdTe-QDs was characterized with various physicochemical methods such as X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray analysis, Ultraviolet–visible and photoluminescence spectroscopies. The optical band gap of the functionalized CdTe-QDs as calculated by using Tauc plot was 3.75 eV. It was found that the fluorescence intensity of the functionalized CdTe-QDs quenched linearly in the presence of different herbicides according to the Stern–Volmer equation. Thus, the functionalized CdTe-QDs can be used as simple, rapid, inexpensive, and optical sensitive sensor for practical detection of herbicides.