机械合金化Fe50Ti50非晶的形成及球磨强度对它的影响

本文通过电子扫描和Ｘ衍射对机械合金人Ｆｅ５０Ｔｉ５０非晶粉末形成做了研究。研究发现：机械合金非晶形成可以大致地分为二个阶段－粉末的破碎阶段和非晶的形成阶段。另外，对球磨强度对非晶形成的影响进行了研究。结果表明：强度低时粉末需要较长的时间才能形成非晶，强度高时粉末形成非晶的时间大大缩短，但在随后的球磨中，粉末会重新晶化形成新相。     

NUMERICAL MODEL FOR DYNAMIC SIMULATION OF TRAFFIC FLOW

ＮＵＭＥＲＩＣＡＬＭＯＤＥＬＦＯＲＤＹＮＡＭＩＣＳＩＭＵＬＡＴＩＯＮＯＦＴＲＡＦＦＩＣＦＬＯＷＷｕＺｈｅｎｇ；ＺｅｎｇＬｉ－ｎｏｎｇ（ＤｅｐａｒｔｍｅｎｔＡｐｐｌｉｅｄＭｅｃｈａｎｉｃｓ，ＦｕｄａｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈａｇｈａｉ２００４３３，Ｐ...     

L-脯氨酸/吡啶催化合成对甲氧基肉桂酸

以L-脯氨酸/吡啶为催化剂,茴香醛和丙二酸为原料,经Knoevenagel 缩合反应合成了对甲氧基肉桂酸.考察了带水剂种类、原料摩尔比、催化剂L-脯氨酸和吡啶用量、反应时间等对对甲氧基肉桂酸收率的影响.结果表明,在以正己烷为带水剂(用量50 mL),茴香醛用量5 mL(0.041 5 mol),丙二酸与茴香醛摩尔比1.2∶1,L-脯氨酸用量(以丙二酸质量计)4.0%,吡啶用量5 mL,反应时间3 h的条件下,对甲氧基肉桂酸重结晶收率达90.0%.     

银矿尾矿砂高强陶粒的研制

以广西凤凰银业有限公司的尾矿砂和废矿页岩为主要原料，在前期工作的基础上，经过实验室试验和生产线中试，成功生产出700～1000密度等级、筒压强度超过10MPa的高强陶粒。这为银矿的尾矿砂和废矿页岩的处理也为我国高强陶粒的生产探索了一条新路。     

覆铜板和PCB翘曲度的检测方法

覆铜板的翘曲分弓曲和扭曲,其检测方法有悬挂检测法与平放检测法,在CCL及PCB行业中,基本上都采用IPC-TM-650检测方法。     

Reynolds number-dependent permeability of wastewater sludge flocs

Most theoretical models assume constant permeability of wastewater sludge floc. This work shows that, at creeping flow limit with small intrafloc Reynolds number, the permeability of floc can not only be affected by floc structure, but also by the external flow condition. The three-dimensional structure of flocs using the fluorescence in situ hybridization (FISH) and the confocal laser scanning microscope (CLSM) was firstly probed. Then, the volumetric grid models for sludge flocs were constructed. We noted that the floc permeability could keep unchanged, increased, or decreased at increased Reynolds number (Re). Flow redistribution among channels of various sizes contributes to the noted Re-dependent permeability of flocs.     

复合吸附剂提高催化裂化柴油安定性的研究

用改性活性白土吸附精制催化裂化柴油，精制后柴油的安定性得到显著提高。对精制后柴油的分析表明：复合吸附剂能够大幅降低油品中的总硫和碱性氮含量，对油品其它性质无大的影响。     

Deposition and Properties of Superconducting MgB2 Thin Films

The recently discovered superconductor MgB₂ with T _c at 39 K has great potential in superconducting electronics. In this paper, we review the deposition techniques used for MgB₂ thin films in the light of a thermodynamic study of the Mg-B system with the calculation of phase diagrams (CALPHAD) modeling technique. This thermodynamic study identifies a growth window in the pressure–temperature phase diagram, in which the magnesium pressure is very high for likely in situ growth temperatures. A Hybrid Physical–Chemical Vapor Deposition (HPCVD) technique that successfully achieves such a high Mg pressure is shown to produce in situ epitaxial MgB₂ thin films with bulk superconducting properties.     

RF-MBE生长的AlGaN/GaN高电子迁移率晶体管特性

用射频分子束外延技术研制出了室温迁移率为10 35 cm2 /(V·s) ,二维电子气浓度为1.0×10 1 3cm- 2 ,77K迁移率为2 6 5 3cm2 /(V·s) ,二维电子气浓度为9.6×10 1 2 cm- 2 的Al Ga N/Ga N高电子迁移率晶体管材料.用此材料研制的器件(栅长为1μm,栅宽为80μm,源-漏间距为4μm )的室温非本征跨导为186 m S/m m,最大漏极饱和电流密度为92 5 m A/m m,特征频率为18.8GHz.