合成革企业环境监管对策的研究

介绍了合成革企业废水、废气治理现状,分析了生产过程中存在的问题,提出了相关环境监管对策,重点是监管塔顶水的去向,核心是做好二甲胺废水及废气的治理,日常做好废水站、雨水口及废气设施运行的监督管理,对环境违法行为实施"零容忍",倒逼企业加快DMF集中回收和采用水性树脂工艺,为合成革企业环保整治指明方向,取得了较好的效果。     

La2O3对SiO2-CaO-Al2O3-MgO熔体黏度和结构的影响

使用分析纯物质模拟微晶玻璃熔体，分别采用柱体旋转法和拉曼光谱技术研究了La2O3含量对SiO2-CaO-Al2O3-MgO熔体黏度和结构的影响规律。结果表明：熔体黏度和黏流活化能随着La2O3含量的增加而降低；拉曼光谱表明La2O3能破坏硅酸盐结构（Qn），随着La2O3含量的增加，Q1、Q2的百分含量增加，Q3的百分含量减小，Q0的百分含量基本不变，表明熔体中非桥氧数量增加，熔体聚合度降低。La2O3在熔体中起网络修饰体的作用。     

大断面切眼支护技术研究与实践

针对古城煤矿S1303综采工作面切眼的地质构造与施工条件,提出了大断面切眼采用“锚网索+π型梁棚+预注浆”联合支护方案,有效地控制了大断面切眼留顶煤施工期间的支护难题,保障了S1303综采面切眼能够满足设计要求和如期完成施工,为同类条件下的切眼施工提供了一定参考。     

超低排放改造后烟气余热利用设备存在问题及防治措施

随着火电厂超低排放改造的普遍应用，低温省煤器等烟气余热利用设备获得了广泛应用。本文针对烟气余热利用设备在实际工程应用中所存在的低温腐蚀、磨损、积灰堵塞以及振动等问题，分析了形成原因及主要影响因素，提出了选用耐低温腐蚀性能优异的材料制造换热器，合理设计受热面结构型式，控制烟气流速和受热面金属壁温，加装吹灰设备以及导流板和防振隔板等防治对策，有效地解决了烟气余热利用设备所存在的低温腐蚀、磨损、积灰堵塞以及振动等问题。     

Synthesis and Properties of Azo Compounds Based on Nitroaniline Derivatives of 2,4,6-Trinitrotoluene and 1,3,5-Trinitrobenzene

Theoretical Foundations of Chemical Engineering - New research results, as well as those published earlier by the authors, on the synthesis of azo compounds based on nitroanilines obtained by the...     

Comparative evaluation of extraction of tetra- and hexa-valent neptunium ions by CMPO in a room temperature ionic liquid

ABSTRACT

Solvent extraction studies were performed to understand the extraction behavior of Np⁴⁺ and NpO₂ ²⁺ from acidic feeds with CMPO (octyl (phenyl)-N,N-diisobutyl carbamoyl methyl phosphine oxide) dissolved in 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide, a water immiscible ionic liquid. Slope analyses on the distribution data revealed the extraction of ML₂ type species, where M = Np⁴⁺ or NpO₂ ²⁺, and L = CMPO. Studies were also carried out with Pu⁴⁺ and UO₂ ²⁺ under identical conditions. The nature of the extracted species was found to vary with the nature of the ionic species.     

Comparative study of Fourier transform infrared spectroscopy (FTIR) analysis of natural fibres treated with chemical,physical and biological methods

Polymer Bulletin - Kenaf and luffa fibres are hydrophilic due to the presence of water sensitive constituents, which tend to form a poor compatibility when binding with polymers. Thus, the surface...     

Structural modification of aminoclay for catalytic applications

Abstract

An eco-friendly catalyst system was synthesized using three step reaction. The Cu nanoparticles bridged aminoclay catalyst was analyzed using various analytical techniques. The structure of the catalyst was confirmed by FTIR and XRD. The synthesized catalyst system was used for the reduction of p-nitrophenol (NP), Cr(VI), and fluorescein (Flur) dye individually, as well as in their mixture forms. The k_app value was computed to access the efficiency of the catalyst. The results indicated that the k_app value of the individual system is higher than that of the mixture systems due to the absence of the complex formation reaction. The catalytic performance of the catalyst was also tested for the Schiff base (SB) formation between poly(ethyleneglycol) (PEG) and aniline (ANI) in an oxygen atmosphere. The ¹H-NMR spectroscopy result indicates that the present catalyst system produced 86% yield.     

Study on surface magnetization recover ilmenite from titanaugite using surfactant sodium oleate

ABSTRACT

Separation of ilmenite from titanaugite was investigated by magnetic coating. By enlarging magnetic difference between ilmenite and titanaugite, ilmenite was efficiently recovered. Scanning electron microscope and vibrating sample magnetometer results indicated that magnetite selectively coated onto ilmenite surface and increased its magnetism, which resulted in different magnetic separation behavior between ilmenite and titanaugite. FTIR and contact angle measurements confirmed that the adsorption difference of sodium oleate resulted in a stronger hydrophobicity on magnetite and ilmenite than titanaugite. Interaction energy analysis illustrated that hydrophobic association interaction on ilmenite was stronger than that on titanaugite, and which led to the selective coating of magnetite onto ilmenite.