Electronic structure and absolute band edge position of tetragonal AgInS2 photocatalyst: A hybrid density functional study

Energy bands, effective mass of carriers, absolute band edge positions and optical properties of tetragonal AgInS₂ were calculated using a first-principles approach with the exchange correlation described by B3LYP hybrid functional. The results indicate that tetragonal AgInS₂ has a direct band gap of 1.93 eV, which reproduce well experimental value. Calculated effective masses of electrons and holes are both small which are beneficial to separation and migration of electron and hole pairs. This implies that AgInS₂ has good photocatalytic performance. The calculated optical characteristics indicate that AgInS₂ has a slight anisotropy for both the real and imaginary parts of the dielectric function and exhibits large optical absorption in the visible light region. Furthermore, the calculated band edge positions in (100), (010) and (001) surfaces indicate that tetragonal AgInS₂ is beneficial to the reduction and oxidation of water to hydrogen and oxygen under visible light irradiation.     

Thermoelastic evaluation of composite laminates using digital imaging processing

The study of the variation of the curvature of non-symmetric composite laminates with temperature provides a measure of the magnitude of the thermal stresses and the mechanical behavior of the material with temperature. In the present work, an experimental method based on the pioneer use of a digital camera and image processing method is proposed to perform such measurements. Taking advantage of the method and by comparing experimental and CLT, extended-CLT and FEM simulation results, an evaluation of the residual stresses is described and an approach providing more precise determination of the residual thermal stresses in non-symmetric laminates is proposed.     

强力输送带接头识别算法

针对现有的强力输送带故障实时检测方法存在故障定位困难的问题,以接头为基准参考点,提出了一种基于图像处理技术的强力输送带接头识别算法。该算法根据接头点的特征,把接头点用一个数值表示出来,并根据这个数值,以一种简单的方式区分出上、下接头点;然后根据接头的特征,并通过修改最长公共子序列算法的匹配方式,对接头进行识别。实际应用表明,该算法精度高、速度快,可有效识别强力输送带的接头,满足了强力输送带故障检测中接头定位的要求。     

多小区多播无线携能通信鲁棒信干噪比平衡

针对非理想信道多小区多播协作网络中的供能问题,提出了一种鲁棒的无线携能通信优化方案,该方案以最差用户信干噪比最大化为目标、以每用户能量采集和每小区功率为约束,在保证用户能量采集约束和系统功率预算的前提下实现最差用户服务质量最优化.为了求解优化问题,采用半定松弛和S-引理将原始问题转化为拟凸优化问题,进而采用二分迭代算法得到问题的最优解.仿真结果表明,所提系统设计正确,迭代算法收敛特性良好.     

The preparation of coupled WO3/TiO2 photocatalyst by ball milling

The coupled photocatalyst WO₃/TiO₂ is prepared by ball milling by doping WO₃ into TiO₂ and using H₂O solution as disperser. The coupled photocatalyst WO₃/TiO₂ is characterized by UV–VIS diffuse reflection spectrum, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD) and Transmission electron microscopy (TEM). The results show that the optimum percentage of WO₃ doped is 3% and that the photocatalytic activity of the coupled WO₃/TiO₂ photocatalyst is much higher than that of TiO₂ and WO₃–TiO₂ with no ball milling. Compared with TiO₂, the photoexcited wavelength range of the WO₃/TiO₂ photocatalyst red-shifts about 50 nm, and the light absorption intensity is also improved. The crystal phase of TiO₂ is not changed and new crystal phases are not found during the process of ball milling. WO₃ and TiO₂ coupled highly, forming the WO₃/TiO₂ photocatalyst. The increased photocatalytic activity of the coupled photocatalyst may be attributed to the enhance charge separation efficiency and the extend wavelength range of photoexcitation.     

基于多子群的社会群体优化算法

社会群体优化算法(social group optimization,SGO)是一种基于社会群体学习而提出的一种新型优化算法。针对社会群体优化算法易于陷入局部最优问题,提出了一种多群社会群体学习算法（MPSGO）。本算法采用多子群学习方法,对算法两个阶段的个体学习方法进行改进,在维持群体收敛性能的前提下提高群体多样性,同时对部分个体中引入量子学习,使个体学习的有用信息得以增强;此外,每隔一定代数对子群进行随机重组,既能保证各子群个体充分进化,又维持了子群多样性。在设计算法的基础上,分析了其收敛性和多样性;通过与其他四种算法进行对比实验,验证了改进后算法性能更优。     

级联No序列的三项式特性研究

利用有限域GF(2n)到其子域GF(2m)上的迹函数及其性质,研究一类非线性扩频序列的密码学性质,即级联No序列的三项式特性。给出级联No序列的三项生成多项式的形式,将级联No序列三项式特性的结论应用到二元No序列中,解决了二元No序列的三项式特性问题。分析结果表明,级联No序列不仅具有三项式对,而且具有正则三项式对。     

基于PSO的负反馈电路参数自适应优化及仿真分析

采用粒子群优化算法,以电压增益、共模抑制比、输入电阻平方根的三者乘积对输出电阻的比作为适应度函数,对差分 共射两级直接耦合电压串联负反馈放大电路中的电阻做自适应优化。结果显示,只要对电路交流指标加以约束,适应度函数值总会减小。当分别对增大电压增益和减小输出电阻进行限制后,电压增益总是尽量小,输出电阻总是尽量大,以使适应度函数在给定约束下取得最大。经EWB软件对优化参数仿真,结果满足线性放大要求。同时说明了可以调整适应度函数形式,找到最佳电路参数,以满足工程上对放大器指标的不同需求。     

疫情下数据结构课程线上教学模式探索与实践

为了在新冠肺炎疫情的影响下充分保障正常的教学秩序,全力做到“停课不停教、停课不停学”,落实“教师真在教、学生真在学”,数据结构教学团队利用超星“一平三端”智慧教学系统和钉钉直播相结合的方式,在教学准备、教学实施、学习评价和教学改进等四个方面开展线上教学模式探索和实践,实现了将线上线下混合式教学转变为纯线上教学模式,体现了“以学生为中心”的教学理念,达到线上与线下同质同效。     

Global Avalanche Characteristics of Boolean Functions by Concatenation

In order to measure the correlation propeties of two Boolean functions,the global avalanche characteristics of Boolean functions constructed by concatenation are discussed,i.e.,f_1‖f_2and f_1‖f_2‖f_3‖f_4.Firstly,for the function f = f_1‖f_2,the cross-correlation function of f_1,f_2 in the special condition are studied.In this case,f,f_1,f_2 must be in desired form.By computing their sum-of-squares indicators,the crosscorrelation function between f_1,f_2 is obtained.Secondly,for the function g = f_1‖f_2‖f_3‖f_4,by analyzing the relation among their auto-correlation functions,their sum-of-squares indicators are investigated.Based on them,the sum-of-squares indicators of functions obtained by Canteaut et al.are investigated.The results show that the correlation property of g is good when the correlation properties of Boolean functions f_1,f_2,f_3,f_4 are good.