Advances in the in vitro digestion and fermentation of polysaccharides

In vitro digestion models are widely used to study the structural changes, digestion and release of food components under simulated gastrointestinal conditions. As compared to the in vivo digestion tests, the in vitro digestion reflects the digestion and utilisation of food after ingestion and has the advantages of being time consuming, inexpensive, reproducible and free from moral and ethical restrictions. This study reviewed the current research studies on the in vitro simulated digestion of polysaccharides conducted in the last 5 years and focused on the oral, gastric and intestinal digestion models, with the aim of providing a basis for the further testing of changes in the content, structure and active ingredients of polysaccharides before and after digestion.     

Enhanced relative permittivity in niobium and europium co-doped TiO2 ceramics

The appearance of colossal permittivity materials broadened the choice of materials for energy-storage applications. In this work, colossal permittivity in ceramics of TiO₂ co-doped with niobium and europium ions ((Eu_0.5Nb_0.5)_xTi_1-xO₂ ceramics) was reported. A large permittivity (ε_r ～ 2.01?×?10⁵) and a low dielectric loss (tanδ ～ 0.095) were observed for (Eu_0.5Nb_0.5)_xTi_1-xO₂ (x?=?1%) ceramics at 1?kHz. Moreover, two significant relaxations were observed in the temperature dependence of dielectric properties for (Eu, Nb) co-doped TiO₂ ceramics, which originated from defect dipoles and electron hopping, respectively. The low dielectric loss and high relative permittivity were ascribed to the electron-pinned defect-dipoles and electrons hopping. The (Eu_0.5Nb_0.5)_xTi_1-xO₂ ceramic with great colossal permittivity is one of the most promising candidates for high-energy density storage applications.     

渤海绥中油田J3井疏水缔合聚合物驱数值模拟研究

为了进一步提高渤海油田J3井区缔合聚合物驱的技术经济效果,在渤海油田室内配方和先导性矿场试验研究基础上,利用化学驱油藏数值模拟软件FAPMS,分析和研究了高浓度缔合聚合物前置段塞、主段塞的大小和浓度以及段塞组合方式对驱油效果的影响,优化设计了渤海绥中油田J3井区块矿场试验的最佳注入程序及段塞大小。结果表明,通过对不同浓度的疏水缔合聚合物注入的前置段塞及主段塞和梯度式后续段塞的优化后,原油采收率比未优化时提高了约10个百分点。研究表明,渤海油田应该高度重视聚合物驱的注入方式和段塞优化设计,进一步提高聚合物的技术经济效果。     

A commodity market algorithm for pricing substitutable Grid resources

A crucial goal for future Grid systems is to strive towards user-centric service provisioning. A way to achieve this is through the use of economics-based resource management. Currently, several models exist from among which auction- and commodity-based models are the most popular. This contribution will focus on the latter, and in particular on commodity markets, where the value of a Grid resource is determined by supply and demand. We propose some refinements to the application of Smale’s method for finding price equilibria in such a Grid market. We also extend the approach to substitutable goods. That is, we introduce ‘slow’ and ‘fast’ CPUs, two categories of the same type of good that are priced separately, but are strongly coupled with potentially strong shifts in demand. We show that Smale’s method can be adapted to handle this type of Grid resources market, and that price stability, allocative efficiency, and fairness are realized.     

基于指纹识别的虚拟硬盘研究

为防止机密数据不被窃取或篡改,本文提出一种基于指纹身份识别的虚拟硬盘文件加密存储方法。该方法是在Windows设备驱动程序的基础上,利用指纹识别技术和虚拟硬盘驱动程序,实现用户身份的唯一认证和文件的安全性管理。实验证明,该方法是一种安全、高效、实用的加密存储方法。     

废旧锂电池中有价金属回收及三元正极材料的再制备

探讨了磷酸体系下不同因素对废旧锂电池正极材料中有价金属浸出效率的影响，结果表明：在浸出时间60min，反应温度60℃，磷酸浓度2mol/L，液固比20mL/g，还原剂(H₂O₂)体积分数为4%时，可得最佳浸出效果，Co、Li、Mn、Ni浸出效率分别可达96.3%、100%、98.8%和99.5%；浸出液添加相应比例金属离子，采用草酸共沉淀法制备前体材料(Ni_1/3Co_1/3Mn_1/3)C₂O₄，并得到相应再生磷酸溶液。再生磷酸进行循环浸出实验，实验研究结果表明：循环浸出5次之后Li的浸出率仍可保持在90.1%，而Co、Mn和Ni的浸出率在75.0%以上。前体添加锂源Li₂CO₃煅烧合成Li(Ni_1/3Co_1/3Mn_1/3)O₂材料，考察了不同温度对Li(Ni_1/3Co_1/3Mn_1/3)O₂材料合成的影响，结果显示，当合成温度为800℃时，得到的材料性能最优良，初次放电容量可达136.4mA·h/g。在0.2C下经过50圈循环后容量保持率为97.2%。     

电路模拟中非线性方程的周期波形响应

用范数估计方法对非线性高阶微分方程的周期边值问题进行了讨论,通过对非线性二阶微分方程周期边值问题的详细讨论,给出了系统函数对某些变量偏导数的某种范数小于1时,非线性二阶微分方程的波形松弛算法产生的迭代序列收敛到该方程的周期解.用类似的方法给出了非线性高阶微分方程的波形松弛算法产生的迭代序列收敛到该方程周期解的充分性条件.     

催化湿式氧化纳米Ce/Mn催化剂的研制

为处理吡虫啉农药废水，通过共沉淀法制备了一系列Ce/Mn催化剂。当n(Ce)∶n(Mn)=2∶1和焙烧温度500 ℃时，所得催化剂颗粒直径为3.60 nm,催化剂的比表面积为127 m²·g^－1。在反应温度190 ℃、总压8.0 MPa、氧分压1.6 MPa、pH为8.42和加入2.0 g·L^－1催化剂的条件下，COD的最高去除率达93%。     

气驱技术对油套管性能的新要求

为有效补充地层能量、大幅提高采收率,保持油田高效开发和持续稳产,国内外油田陆续开展了气驱试验。气驱技术在保持油田高效开发和持续稳产的同时,也延长了油田生命周期,但井筒完整性是制约气驱技术发展的关键因素之一。通过分析气驱井油套管失效情况,从全生命周期角度,提出了保证井筒完整性措施以及气驱工艺下油套管选材思路,并指出在注气井或采出井采用耐蚀合金连续油管和非金属连续油管,可兼顾防腐和气密封功能,将是气驱工艺的发展方向。