Doping-free hybrid white organic light-emitting diodes with fluorescent blue,phosphorescent green and red emission layers

Industrialized white organic light-emitting diodes (OLEDs) currently require host-guest doping, a complicated process necessitating precise control of the guest concentration to get high efficiency and stability. Two doping-free, hybrid white OLEDs with fluorescent blue, and phosphorescent green and red emissive layers (EMLs) are reported in this work. An ultra-thin red phosphorescent EML was situated in a blue-emitting electron transport layer (ETL), while the ultra-thin green phosphorescent EML was placed either in the ETL (Device 1), or the hole transport layer (HTL) (Device 2). Device 2 exhibits higher efficiency and more stable spectrum due to the enhanced utilization of excitons by ultra-thin green EML at the exciton generation zone within the HTL. Values of current efficiency (CE), power efficiency (PE), and CRI obtained for the optimized hybrid white OLEDs fabricated through a doping-free process were of 23.2 cd/A, 20.5 lm/W and 82 at 1000 cd/m², respectively.     

Mechanical properties of graphene films enhanced by homo-telechelic functionalized polymer fillers via π–π stacking interactions

Most researches on graphene/polymer composites are focusing on improving the mechanical and electrical properties of polymers at low graphene content instead of paying attention to constructing graphene’s macroscopic structures. In current study the homo-telechelic functionalized polyethylene glycols (FPEGs) were tailored with π-orbital-rich groups (namely phenyl, pyrene and di-pyrene) via esterification reactions, which enhanced the interaction between polyethylene glycol (PEG) molecules and chemical reduced graphene oxide (RGO) sheets. The π–π stacking interactions between graphene sheets and π-orbital-rich groups endowed the composite films with enhanced tensile strength and tunable electrical conductivity. The formation of graphene network structure mediated by the FPEGs fillers via π–π stacking non-covalent interactions should account for the experimental results. The experimental investigations were also complemented with theoretical calculation using a density functional theory. Atomic force microscope (AFM), scanning electron microscope (SEM), X-ray diffraction (XRD), nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), UV–vis and fluorescence spectroscopy were used to monitor the step-wise preparation of graphene composite films.     

Charge transport and luminescent properties of PMMA-dehydrate nanotubed titanic acid nanocomposites

In this paper, we doped p-type conductivity dehydrated nanotubed titanic acid (DNTA) into insulator polymer poly(methyl methacrylate) (PMMA). The electric properties of this nanocomposite were investigated. The photoluminescence efficiency of fluorescent dye 4-(dicyanomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) in PMMA matrix was enhanced by doping with DNTA. Moreover, screen effect by DNTA with high permittivity caused the emission from DCJTB to be blue-shifted.     

Ultrahigh-performance planar β-Ga_2O_3 solar-blind Schottky photodiode detectors

The low dark current, high responsivity and high specific detectivity could be preferably achieved in detectors based on junctions, owing to the efficient constraint of carriers. Compared with the other junctions, planar Schottky junctions have simple structures and technological demands and are easy integrated. Herein, in this work, we prepared the β-Ga_2O_3 thin film by metalorganic chemical vapor deposition method to construct planar Ti/β-Ga_2O_3/Ni Schottky photodiode detectors with different onstate resistances. Fortunately, all the devices exhibit state-of-the-art performances, such as responsivity of 175–1372 A W~(-1),specific detectivity of 10~(14) Jones and external quantum efficiency of 85700%–671500%. In addition, the dependences of device performances on the on-state resistances indicate that the higher dark currents, photocurrents and photoresponsivities may well be obtained when on-state resistance is smaller, due to the less external power is used to overcome the impendence and condensance at the Ti/β-Ga_2O_3 and Ni/β-Ga_2O_3 interfaces, but contributing to higher electric current flow both in the dark and under illuminations.     

基于同步补偿法的精密温度测控系统设计

设计了一种高精度温度测控系统。在恒流源测温电路中接入基准电阻作为系统测温的零度基准,放大电路对基准电阻与铂电阻两端的电压差进行放大;采用同步补偿法,在测温电路中接入采样电阻以获取A/D转换所需的参考电压,消除了恒流源电流的波动对系统测温性能的影响;通过分段线性化的方法对铂电阻测温的非线性进行补偿。基于MAX1968构建了高集成度的TEC驱动电路,采用增量式PID控制算法实现高精度的温度控制。实验结果表明,系统测温标准差为0.024℃,控温精度为±0.119℃。     

Single phase multi color emitting Ca2LuTaO6: Dy3+/Eu3+ double perovskite oxide phosphors

The trivalent rare-earth (RE³⁺) doped phosphors show tremendous achievement in narrow band multicolor line emission for various applications. However, the 4f–4f absorption transition of these ions is forbidden in UV and blue light excitation. Usually, a sensitizer having spin allowed transition was used as a co-dopant to excite these ions via the energy transfer phenomenon. Another approach promisingly using to excite these ions by efficient energy transfer from the intrinsic emission of the Ca₂LuTaO₆ double perovskite phosphors host lattice. Phosphors of Ca₂LuTaO₆ with double perovskite structure were synthesized by using a high-temperature solid-state reaction method. The produced Ca₂LuTaO₆ double perovskite phosphors show an intrinsic broad band emission centered at 424 nm under the excitation of 313 nm UV light. The origin of this broad band blue emission was deeply investigated by using computation and experimental approaches. The trivalent activator Dy³⁺ and Eu³⁺ were doped is a single and co-dopant in the produced Ca₂LuTaO₆ phosphors to check their excitation in UV and near-UV spectral region. X-ray diffraction and scanning electron microscopy were used to investigate the structure and phase analysis. Various characterizations such as photoluminescence excitation, emission, and CIE chromaticity coordinates were measured which illustrate the potential of Dy³⁺ and Eu³⁺ activated Ca₂LuTaO₆ double perovskite phosphors for narrow band multicolor line emission for various applications.     

Characterization of microwave and terahertz dielectric properties of single crystal La2Ti2O7 along one single direction

New generation wireless communication systems require characterisations of dielectric permittivity and loss tangent at microwave and terahertz bands. La₂Ti₂O₇ is a candidate material for microwave application. However, all the reported microwave dielectric data are average value from different directions of a single crystal, which could not reflect its anisotropic nature due to the layered crystal structure. Its dielectric properties at the microwave and terahertz bands in a single crystallographic direction have rarely been reported. In this work, a single crystal ferroelectric La₂Ti₂O₇ was prepared by floating zone method and its dielectric properties were characterized from 1 kHz to 1 THz along one single direction. The decrease in dielectric permittivity with increasing frequency is related to dielectric relaxation from radio frequency to microwave then to terahertz band. The capability of characterizing anisotropic dielectric properties of a single crystal in this work opens the feasibility for its microwave and terahertz applications.     

High-Resolution and Stable Ruddlesden–Popper Quasi-2D Perovskite Flexible Photodetectors Arrays for Potential Applications as Optical Image Sensor

The development of an efficient fabrication route to achieve high-resolution perovskite pixel array is key for large-scale flexible image sensor devices. Herein, a high-resolution and stable 10 × 10 flexible PDs array based on formamidinium(FA⁺) and phenylmethylammonium (PMA⁺) quasi-2D (PMA)₂FAPb₂I₇ (n = 2) perovskite is demonstrated by developing SiO₂-assisted hydrophobic and hydrophilic treatment process on polyethylene terephthalate substrate. By introducing Au nanoparticles (Au NPs),  the perovskite film quality is improved and grain boundaries are reduced. The mechanism by which Au NPs upgrade the photoelectric quality of perovskite is mainly revealed by glow discharge-optical emission spectroscopy (GD-OES) and grazing-incidence wide-angle X-ray scattering (GIWAXS). To further improve the photoelectric performance of the devices, a post-treatment strategy with formamidinium chloride (FACl) is used . The optimized flexible PDs arrays show excellent optoelectronic properties with a high responsivity of 4.7 A W⁻¹, a detectivity of 6.3 × 10¹² Jones, and a broad spectral sensitivity. The device also exhibits excellent electrical stability even under severe bending and excellent flexural strength, as well as excellent environmental stability. Finally, the integrated flexible PDs arrays are used as sensor pixels in an imaging system to obtain high-resolution imaging patterns, demonstrating the imaging capability of the PDs arrays.     

基于ZnGeP2光参量振荡器的长波红外双波段调谐实验研究

文中报道了一种基于ZnGeP₂ (ZGP) 的纳秒宽调谐长波红外光参量振荡器(optical parametric oscillation, OPO)。采用重复频率50 Hz、脉冲宽度小于10 ns的1064 nm基频光泵浦基于Ⅱ类相位匹配KTP的光参量振荡器产生2.1 μm激光,进而泵浦基于Ⅰ类相位匹配的ZGP光参量振荡器产生7~11 μm长波红外输出。通过对ZGP的角度调谐获得了2.815~2.963 μm连续可调谐信号光,对应闲频光波长连续可调谐范围为7.82~9.08 μm。通过泵浦波长调谐的方式,当采用2107.13~2153.95 nm范围内的激光泵浦ZGP-OPO,获得了信号光波长范围为2.624~2.662 μm和2.745~2.956 μm的连续可调谐输出,对应闲频光范围为7.94~9.07 μm和10.20~10.82 μm。闲频光波长为8.03 μm、能量为0.8 mJ时,ZGP-OPO的泵浦光至闲频光转换效率9.4%。     

Room-Temperature Magnetic Skyrmions and Large Topological Hall Effect in Chromium Telluride Engineered by Self-Intercalation

Room-temperature magnetic skyrmion materials exhibiting robust topological Hall effect (THE) are crucial for novel nano-spintronic devices. However, such skyrmion-hosting materials are rare in nature. In this study, a self-intercalated transition metal dichalcogenide Cr_1+xTe₂ with a layered crystal structure that hosts room-temperature skyrmions and exhibits large THE is reported. By tuning the self-intercalate concentration, a monotonic control of Curie temperature from 169 to 333 K and a magnetic anisotropy transition from out-of-plane to the in-plane configuration are achieved. Based on the intercalation engineering, room-temperature skyrmions are successfully created in Cr_1.53Te₂ with a Curie temperature of 295 K and a relatively weak perpendicular magnetic anisotropy. Remarkably, a skyrmion-induced topological Hall resistivity as large as ≈106 nΩ cm is observed at 290 K. Moreover, a sign reversal of THE is also found at low temperatures, which can be ascribed to other topological spin textures having an opposite topological charge to that of the skyrmions. Therefore, chromium telluride can be a new paradigm of the skyrmion material family with promising prospects for future device applications.