Permeability of carbon shells during sulfidation of encapsulated silver nanoparticles

In this work, we have studied morphological, structural and phase changes in amorphous carbon-encapsulated silver nanoparticles (Ag@C) upon treatment by H₂S gas. The carbon shells have been found to present no impassable obstacles for the silver sulfide to form. The growth of Ag₂S nanocrystals occurs on the outer surface of the carbon shell, the size of the encapsulated silver nanoparticle decreasing continuously until the nanoparticle is fully consumed. An explanation of the morphological changes observed in the Ag@C nanoparticles upon treatment by H₂S gas is proposed.     

Microstructural evolution,mechanical and thermal properties of TiC-ZrC-Cr3C2 composites

Dense TiC-ZrC-Cr₃C₂ composites with various TiC content from 19.6 mol% to 78.4 mol% have been fabricated by hot-pressing sintering at 1950 °C using 2.0 mol% Cr₃C₂ as sintering aid. The effect of TiC content on the microstructure, mechanical and thermal properties of TiC-ZrC-Cr₃C₂ composites are investigated systematically. The single (Zr, Ti, Cr)C solid solution is obtained when TiC content is 19.6 mol%, while with increasing TiC content, the composites begin to consist of Zr-rich (Zr, Ti)C solid solution and Ti-rich (Ti, Zr, Cr)C solid solution phase. SEM and EDS analysis confirm that Cr element is not favorable to diffuse into ZrC lattice to form (Zr, Cr)C solid solution. Flexural strength and Vickers hardness increase gradually with increasing TiC content, but fracture toughness does not improve significantly. Fracture toughness are in the range of 3.34–4.01 MPa∙m^1/2 for all composites, and the optimum value reaches 4.01 MPa·m^1/2 with 49.0 mol% TiC. Experimental results of the thermal expansion coefficient reveal that the addition of TiC raises the thermal expansivity of TiC-ZrC-Cr₃C₂ composites. Noticeably, the thermal conductivities of TiC-ZrC-Cr₃C₂ composites show a decrement trend with increasing TiC content, not as theoretical predicting by the rule of mixtures. For instance, the thermal conductivity at 25 °C ranges from 18.0 W/m∙K for 8Z2T2C composite down to 10.6 W/m∙K for 2Z8T2C composite.     

Influence of sintering temperature on the crystallization and mechanical properties of BN-MAS composites

A type of boron nitride–magnesium aluminum silicate (BN-MAS) composite ceramics was fabricated by hot-press sintering at different sintering temperatures. The relationship between the sintering temperature and microstructure was investigated by analyzing the interaction between hexagonal boron nitride (h-BN) and the MAS phase. The main MAS phase in the composite ceramics is the α-cordierite phase at a sintering temperature of 1300°C. At temperatures above 1400°C, the inhibitory effect of h-BN on the crystallization of the MAS system is significant, and MAS mainly exists in the form of an amorphous phase. The composite sintered at 1700°C exhibited the highest bending strength of 218MPa. h-BN and MAS were co-enhanced. MAS can be used as an effective liquid-phase sintering aid to assist in the sintering of h-BN, whereas h-BN can absorb the fracture energy of the composite ceramics through the pull-out and bridging effect of the particles.     

Response of structure and mechanical properties of high entropy pyrochlore to heavy ion irradiation

Material with superior damage tolerance, chemical durability, and structure stability is of increasing interest in high-level radioactive waste management and structural components for advanced nuclear systems. In this paper, high-entropy (La_0.2Ce_0.2Nd_0.2Sm_0.2Gd_0.2)₂Zr₂O₇ with pyrochlore-type structure was synthesized through conventional solid-state method. The as-synthesized high-entropy oxide maintained crystalline after being irradiated by using Au³⁺ with 9.0 MeV energy at the fluence of 4.5 × 10¹⁵ ions·cm^-2, indicating its high tolerance to heavy-ion irradiation. The irradiation-induced order-disorder transition from pyrochlore structure to defective fluorite structure occurred in high-entropy (La_0.2Ce_0.2Nd_0.2Sm_0.2Gd_0.2)₂Zr₂O₇. After irradiation, no irradiation-induced segregation was observed at grain boundary. Moreover, the mechanical properties of high-entropy pyrochlore were improved. The heavy-ion irradiation resistance mechanisms of high-entropy pyrochlore were discussed in detail. Our work identified high-entropy (La_0.2Ce_0.2Nd_0.2Sm_0.2Gd_0.2)₂Zr₂O₇ can be a promising candidate for immobilization of high-level radioactive waste as well as advanced nuclear reactor system from the perspective of irradiation resistance.     

Fusion welding of refractory metals and ZrB2-SiC-ZrC ceramics

Molybdenum and a molybdenum alloy were fusion welded to ZrB₂-based ceramics to determine if the electrical and thermal properties of the metals and ceramics affected their weldability. Commercial ceramic powders were hot pressed, machined into coupons, and preheated to 1600 °C before joining the ceramics to commercial metals using plasma arc welding. Weldability varied as indicated by the range of porosity observed within the fusion zones. Measured thermal and electrical properties appeared to have little to no effect on the weldability of metal-ceramic welds despite the large range of values measured across each property. Differences in melting temperatures between metal and ceramic coupons did affect weldability by changing the weld penetration depth into ceramic coupons. Future studies on metal-ceramic welds are suggested to investigate the effect that work function, melt viscosity, wetting, or other properties have on weldability.     

Achieving enhanced densification and superior ionic conductivity of garnet electrolytes via a co-doping strategy coupled with pressureless sintering

Lithium garnet oxides with 6.5 mol Li, such as Li_6.5La₃Zr_1.5(Ta/Nb)_0.5O₁₂, typically crystallise in cubic structure and exhibit excellent room-temperature ionic conductivity close to 1 mS cm^?1. However, it is challenging to densify garnet oxides. In this work, we investigated how the co-doping of tantalum (Ta) and niobium (Nb) affects the densification of pressureless sintered garnet electrolytes with compositions of Li_6.5La₃Zr_1.5Ta_(0.5?x)Nb_xO₁₂, where x = 0–0.5. The highest densification (94.5% of relative density) was achieved in Li_6.5La₃Zr_1.5Ta_0.1Nb_0.4O₁₂ (TN-LLZO) when it was sintered at 1150 °C for 6 h. This TN-LLZO garnet electrolyte delivers an ionic conductivity of 1.04 × 10^?3 S cm^?1 (at 22 °C) with a low activation energy of 0.41 eV. Our findings demonstrate that the content of dopants (Ta and Nb) plays a critical role in enhancing the sintering performance of garnet ceramics at ambient pressure.     

Microstructure evolution and grain growth mechanisms of h-BN ceramics during hot-pressing

Pure h-BN ceramic specimens were prepared by hot-pressing under different sintering temperatures and pressures using ball milled h-BN powders composed of amorphous and nanocrystalline BN. Microstructures and thermal conductivities of these h-BN ceramic specimens were characterized and measured. Higher sintering pressure is more favorable to the preferred orientation growth of plate-like h-BN grains along the pressure direction, forming microstructures where the c-axes of h-BN grains are preferentially oriented perpendicular to the pressure direction. However, such microstructures can only be obtained at appropriate sintering temperature. Thermal conductivities of h-BN ceramic specimens are strongly related to their microstructures, especially the grain orientation. Growth mechanisms of h-BN grains were investigated. There is multi-area co-growth phenomenon around the grain boundaries composed of the basal planes of h-BN grains, which results in the formation of stacking faults in the as-grown h-BN grains.     

Fabrication and in vitro characterization of antibacterial magneto-luminescent core-shell bioactive glass nanoparticles

When nanomaterials with antibacterial properties were sent to the infected area, it was predicted that infection and related complications could be prevented. The nanoparticles can be designed to possess magnetic and luminescence (magneto-luminescent) properties to be effectively targeted and localized at the infection foci without dispersing into the body. Simultaneously, the magneto-luminescent characteristic of particles allows visualization and confirmation of localized particles at the desired area. In this regard, there are no studies on the use of antibacterial magneto-luminescent bioactive glass for orthopedic applications and the treatment of orthopedic device-related infections. In this study, antibacterial magneto-luminescent 58S bioactive glasses were synthesized by the modified Stöber using coupled with a layer-by-layer assembly approach to possess core/shell particle morphology. SPION/Bioactive glass nanoparticles had an average size of 50 nm and displayed superparamagnetic behavior. While the saturation magnetization value (σ_s) of the undoped 58S sample was 25.32 emu/g, that of the co-doped sample (2% Eu, 2% Zn) was 21.74 emu/g; this showed that the doping slightly reduced the magnetization value. Europium (Eu) doping of SPION/Bioactive glass nanoparticles induced characteristic red emission originating from Eu emissions belonging to ⁵D₀–⁷F_J (J = 1–4) transitions and the strongest peak was at 612 nm (electric-dipole transition, ⁵D₀–⁷F₂). Color chromaticity coordinates confirmed emission in the red region. XPS spectrum revealed the existence of Eu and Zn dopant elements in 58S bioactive glass. After soaking characteristic peaks at 31.74° and 45.43° belonging to the hexagonal hydroxyapatite phase were detected in the XRD data, confirming the SEM images. 2% Eu doped SPION/Bioactive glass nanoparticles had the highest osteoblast viability up to 7 days in vitro, while doping the samples with 2% zinc did not yield bone cell viability as high as the Eu doped ones. Importantly, Eu doped SPION/Bioactive glass nanoparticles inhibited gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli) growth up to 48 h in vitro. The results showed that Eu doping of SPION/Bioactive glass nanoparticles increased osteoblast viability and inhibited bacterial growth, while possessing superparamagnetic properties and exhibiting red luminescence.     

Sintering,microstructure and mechanical properties of Al2O3–Y2O3–ZrO2 (AYZ) eutectic composition ceramic microcomposites

We report on how the mechanical properties of sintered ceramics (i.e., a random mixture of equiaxed grains) with the Al₂O₃–Y₂O₃–ZrO₂ eutectic composition compare with those of rapidly or directionally solidified Al₂O₃–Y₂O₃–ZrO₂ eutectic melts. Ceramic microcomposites with the Al₂O₃–Y₂O₃–ZrO₂ eutectic composition were fabricated by sintering in air at 1400–1500 °C, or hot pressing at 1300–1400 °C. Fully dense, three phase composites of Al₂O₃, Y₂O₃-stabilized ZrO₂ and YAG with grain sizes ranging from 0.4 to 0.8 μm were obtained. The grain size of the three phases was controlled by the size of the initial powders. Annealing at 1500 °C for 96 h resulted in grain sizes of 0.5–1.8 μm. The finest scale microcomposite had a maximum hardness of 19 GPa and a four-point bend strength of 282 MPa. The fracture toughness, as determined by Vickers indentation and indented four-point bending methods, ranged from 2.3 to 4.7 MPa m^1/2. Although strengths and fracture toughnesses are lower than some directionally or rapidly solidified eutectic composites, the intergranular fracture patterns in the sintered ceramic suggest that ceramic microcomposites have the potential to be tailored to yield stronger, tougher composites that may be comparable with melt solidified eutectic composites.