Real-time communications over wired/wireless PROFIBUS networks supporting inter-cell mobility

PROFIBUS is an international standard (IEC 61158, EN 50170) for factory-floor communications, with several thousands of installations worldwide. Taking into account the increasing need for mobile devices in industrial environments, one obvious solution is to extend traditional wired PROFIBUS networks with wireless capabilities. In this paper, we outline the major aspects of a hybrid wired/wireless PROFIBUS-based architecture, where most of the design options were made in order to guarantee the real-time behaviour of the overall network. We also introduce the timing unpredictability problems resulting from the co-existence of heterogeneous physical media in the same network. However, the major focus of this paper is on how to guarantee real-time communications in such a hybrid network, where nodes (and whole segments) can move between different radio cells (inter-cell mobility). Assuming a simple mobility management mechanism based on mobile nodes performing periodic radio channel assessment and switching, we propose a methodology to compute values for specific parameters that enable an optimal (minimum) and bounded duration of the handoff procedure.     

Global experience curves for wind farms

In order to forecast the technological development and cost of wind turbines and the production costs of wind electricity, frequent use is made of the so-called experience curve concept. Experience curves of wind turbines are generally based on data describing the development of national markets, which cause a number of problems when applied for global assessments. To analyze global wind energy price development more adequately, we compose a global experience curve. First, underlying factors for past and potential future price reductions of wind turbines are analyzed. Also possible implications and pitfalls when applying the experience curve methodology are assessed. Second, we present and discuss a new approach of establishing a global experience curve and thus a global progress ratio for the investment cost of wind farms. Results show that global progress ratios for wind farms may lie between 77% and 85% (with an average of 81%), which is significantly more optimistic than progress ratios applied in most current scenario studies and integrated assessment models. While the findings are based on a limited amount of data, they may indicate faster price reduction opportunities than so far assumed. With this global experience curve we aim to improve the reliability of describing the speed with which global costs of wind power may decline.     

Photocatalytic evolution of hydrogen over mesoporous TiO2 supported NiO photocatalyst prepared by single-step sol–gel process with surfactant template

Photocatalytic activity of mesoporous titania supported nickel oxide photocatalyst synthesized by single-step sol–gel (SSSG) process combined with surfactant-assisted template method was investigated for hydrogen evolution from an aqueous methanol solution, in comparison with one prepared by conventional incipient wetness impregnation (IWI) method. In single-step sol–gel process, nickel precursor was introduced into the titania sol prepared with the aid of a surfactant template behaving as pore-controlling agent to attain meso-scaled pore. The single-step sol–gel photocatalyst was experimentally found to enhance the photocatalytic evolution of hydrogen rather than the impregnated one. The optimum level of nickel loading in photocatalytic activity test for single-step sol–gel method was slightly higher than that for incipient wetness impregnation method. Characterization results demonstrated the significant modification of physical characteristics of the single-step sol–gel photocatalyst, anticipated to relating to the observation of higher photocatalytic hydrogen evolution activity.     

A numerical study of radiation heat transfer in sodium pool combustion and response surface modeling of luminous flame emissivity

A response surface model of the luminous flame emissivity of sodium pool fire has been proposed for use in safety analysis computer codes of a liquid metal fast reactor. The liquid sodium burns in air resulting in not only heat generation but also release of sodium oxide aerosols of sub-micron diameters. Aerosols levitating in air are radiative and they influence the allocation of combustion heat from the flame to atmospheric gas or sodium pool. The emissivity of the flame needs to be quantified, as it is one of user-specified parameters of the computer codes for the sodium fire analysis. The response surface model of the flame emissivity is developed based on numerical experiments on the physics of mass and heat transfer and behavior of the aerosol. Thermal-hydraulic equations have been solved coupled with aerosol dynamics and chemical reaction. Three influential variables on the emissivity are identified as pool temperature, gas temperature and oxygen molar fraction in the air. It has been found that the emissivity is calculated reasonably as a function of the three variables. The proposed response surface model can be easily employed in the sodium fire analysis codes because it is a simple quadratic expression. For the safety evaluation of the sodium fire, combined use is recommended of the proposed model and the lumped-mass zone model code.     

Fabrication of nano-porous silicon oxide layers by plasma polymerisation methods

We report on the synthesis of nano-porous silicon oxide (SiO₂) layers by gas phase polymerisation reactions of hexamethy disiloxane and oxygen. The SiO₂ layers are deposited onto one or more layers of poly(methylmethacrylate) (PMMA) particles spin coated onto the substrate surface. Subsequent annealing of the films to high temperature (500 °C) leads to the pyrolysis of the polymeric particles resulting in a 3D nanoporosity in the film. X-ray Photoelectron (XPS) and Fourier Transform Infra Red Spectroscopy (FTIR) show an SiO₂-like surface chemistry and virtually complete removal of the organic components. These materials offer a very high surface area-to-volume ratio suitable for sensing applications.     

Synthesis and electrochemical properties of layered Li[Ni0.333Co0.333Mn0.293Al0.04]O2−zFz cathode materials prepared by the sol–gel method

The cathode-active materials, layered Li[Ni_0.333Co_0.333Mn_0.293Al_0.04]O_2−zF_z (0 ≤ z ≤ 0.1), were synthesized from a sol–gel precursor at 900 °C in air. The influence of Al–F co-substitution on the structural and electrochemical properties of the as-prepared samples was characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and electrochemical experiments. The results showed that Li[Ni_0.333Co_0.333Mn_0.293Al_0.04]O_2−zF_z has a typical hexagonal structure with a single phase, the particle sizes of the samples tended to increase with increasing fluorine content. It has been found that Li[Ni_0.333Co_0.333Mn_0.293Al_0.04]O_1.95F_0.05 showed an improved cathodic behavior and discharge capacity retention compared to the undoped samples in the voltage range of 3.0–4.3 V. The electrodes prepared from Li[Ni_0.333Co_0.333Mn_0.293Al_0.04]O_1.95F_0.05 delivered an initial discharge capacity of 158 mAh⁻¹ g and an initial coulombic efficiency is 91.3%, and the capacity retention at the 20th cycle was 94.9%. Though the F-doped samples had lower initial capacities, they showed better cycle performances compared with F-free samples. Therefore, this is a promising material for a lithium-ion battery.     

Development of a small DMFC bipolar plate stack for portable applications

The direct methanol fuel cell (DMFC) is regarded as a promising candidate in portable electronic power applications. Bipolar plate stacks were systematically studied by controlling the operating conditions, and by adjusting the stack structure design parameters, to develop more commercial DMFCs. The findings indicate that the peak power of the stack is influenced more strongly by the flow rate of air than by that of the methanol solution. Notably, the stack performance remains constant even as the channel depth is decreased from 1.0 to 0.6 mm, without loss of the performance in each cell. Furthermore, the specific power density of the stack was increased greatly from ∼60 to ∼100 W l⁻¹ for stacks of 10 and 18 cells, respectively. The current status of the work indicates that the power output of an 18-cell short stack reaches 33 W in air at 70 °C. The outer dimensions of this 18-cell short stack are only 80 mm × 80 mm × 51 mm, which are suitable for practical applications in 10–20 W DMFC portable systems.     

Molecular imprinting strategy for solvent molecules and its application for QCM-based VOC vapor sensing

Cross-linked polymers made of methyl methacrylate (MMA) as a monomer and divinylbenzene (DVB) as a cross-linking agent were prepared in the presence of toluene or p-xylene as a solvent. The cross-linked polymer prepared in toluene tended to sorb toluene vapor preferably, while the cross-linked polymer prepared in p-xylene sorbed p-xylene vapor preferably. The observed molecular recognition ability can be explained on the bases of an imprinting effect by solvent molecules. Molecularly imprinted polymer (MIP) powders were blended with PMMA, and the blended films were coated on a piezoelectric quartz crystal with a view to preparing QCM-based VOC sensors. The imprint effect was clearly observed, even in these blended films. The response of the sensor towards toluene or p-xylene vapor was reversible; however, the response time was slow due to the existence of the matrix polymer around the MIP particles.