广义正交码索引调制系统的性能分析

摘 要：为了提高码索引调制（code index modulation，CIM）系统的传输效率，提出了一种具有更低复杂度的单输入单输出（single input single output，SISO）的广义正交码索引调制（generalized orthogonal code index modulation，GQCIM）系统。CIM 系统使用扩频码和星座符号传输信息，但只能激活两个扩频码索引和一个调制符号。而 GQCIM 系统以一种新颖的方式克服了只激活一个调制符号的限制，同时充分利用了调制符号的正交性，增加扩频码索引以传输更多的额外信息位，提高了系统的传输效率。此外，分析了GQCIM系统的理论性能，推导了误码率性能的上界。通过蒙特卡罗仿真验证了GQCIM系统的性能，对比发现GQCIM系统的理论和仿真性能一致。而且在相同的传输效率下，结果显示GQCIM系统的性能优于同样具有正交性的调制系统，如广义码索引调制（generalized code index modulation，GCIM）系统、CIM系统、码索引调制-正交空间调制（code index modulation aided quadrature spatial modulation，CIM-QSM）系统、码索引调制-正交空间调制（code index modulation aided spatial modulation，CIM-SM）系统、脉冲索引调制（pulse index modulation，PIM）系统。     

Effects of the film thickness and poling electric field on photovoltaic performances of (Pb,La)(Zr,Ti)O3 ferroelectric thin film-based devices

The ferroelectric photovoltaic (FPV) effect obtained in inorganic perovskite ferroelectric materials has received much attention because of its large potential in preparing FPV devices with superior stability, high open-circuit voltage (V_oc) and large short-circuit current density (J_sc). In order to obtain suitable thickness for the ferroelectric thin film as light absorption layer, in which, the sunlight can be fully absorbed and the photo-generated electrons and holes are recombined as few as possible, we prepare Pb_0.93La_0.07(Zr_0.6Ti_0.4)_0.9825O₃ (PLZT) ferroelectric thin films with different layer numbers by the sol-gel method and based on these thin films, obtain FPV devices with FTO/PLZT/Au structure. By measuring photovoltaic properties, it is found that the device with 4 layer-PLZT thin film (~300 nm thickness) exhibits the largest V_oc and J_sc and the photovoltaic effect obviously depends on the value and direction of the poling electric field. When the device is applied a negative poling electric field, both the V_oc and J_sc are significantly higher than those of the device applied the positive poling electric field, due to the depolarization field resulting from the remnant polarization in the same direction with the built-in electric field induced by the Schottky barrier, and the higher the negative poling electric field, the larger the V_oc and J_sc. At a -333 kV/cm poling electric field, the FPV device exhibits the most superior photovoltaic properties with a V_oc of as high as 0.73 V and J_sc of as large as 2.11 μA/cm². This work opens a new way for developing ferroelectric photovoltaic devices with good properties.     

Top illuminated organic photodetectors with dielectric/metal/dielectric transparent anode

The top illuminated organic photodetectors (OPDs) with a Dielectric/Metal/Dielectric (DMD) transparent anode are fabricated. The transparent electrode is composed of molybdenum trioxide (MoO₃)/silver (Ag)/MoO₃ layers and zinc oxide (ZnO)/aluminum (Al) is used for bottom cathode. The optimized DMD electrode has an optical transmittance of 85.7% at the wavelength of 546 nm and sheet resistance of ∼6 Ω/sq. The fabricated OPDs exhibit a high detectivity and wide range linearity.     

基于随机光栅的可调谐随机光纤激光器

提出一种基于随机光栅与高反射布拉格光栅(FBG)相结合的可调谐随机光纤激光器。利用980nm泵浦光源泵浦一段7m长的掺铒光纤(EDF)进行增益放大,由随机光栅提供随机反馈。随机光栅长7cm,具有约10000个折射率修改点,这些点由飞秒激光逐点写入,并沿光纤方向随机分布,两点相邻间隔小于10μm。同时,利用中心波长为1548nm的高反射FBG来组成半开放腔结构,实现了随机激光的输出。实验测得的泵浦阈值功率仅为18mW,斜率效率高达13.2%,并通过改变FBG的中心波长,实现了输出激光波长的可调谐,调谐范围为4.45nm(1548.04~1552.49nm)。得益于半开放式激光腔的设计和EDF的高增益,整个系统具有阈值低、效率高、结构简单等优点。     

Structural,morphological, dielectric and magnetic properties of Zn-Zr co-doping yttrium iron garnet

In this study, yttrium iron garnet co-doped with Zn and Zr atoms with a chemical formula Y₃Zn_xZr_xFe_(5−2x)O₁₂ (x = 0.0-0.3) has been successfully prepared by the solid-state reaction method. The effects of doping concentration on the microstructure, crystal structure, magnetic properties, and dielectric properties of Y₃Zn_xZr_xFe_(5−2x)O₁₂ were investigated. The microstructure analysis indicates that co-doping of YIG with Zn and Zr can effectively reduce the grain size of the ceramic. The crystal structure results reveal that the doping concentration of Zn–Zr has substantial influence on the lattice parameters of YIG, such as, increases the lattice constant, crystal cell size, and interplanar spacing. However, the second phase of ZrO₂ appears once x ≥ 0.15. Additionally, the dielectric properties of YIG ferrite can be regulated using this Zn–Zr co-doping method. Zn–Zr co-doping can improve the dielectric stability and reduce the dielectric loss at high temperature. The magnetization measurement shows that the saturation magnetization is stabilized at x < 0.15, and the magnetic loss is decreased with the increase in the doping concentration. Overall, the findings show that the ceramic with x = 0.1 exhibits better properties included high saturation magnetization (24.607 emu/g), low magnetic loss (0.0025 @ 1 MHz), and relatively low dielectric loss (496 @ 400°C).     

一种基于稳健匹配准则的视频文本跟踪方法

本文首先根据文本中各个字符的颜色相似的特性,确定已知文本块的文本的颜色,利用文本的颜色信息二值化文本图像以得到文本块中的字符数、字符的尺寸和间距;其次,根据视频图像的大小和视频的播放速度确定搜索窗口的大小,并利用文本的运动信息来预测搜索窗口的位置;第三,根据在相邻两帧中具有相同内容文本的颜色相似的特性,提出了一个可以解决脉冲噪声和部分缺损或遮挡问题的稳健匹配准则来跟踪文本块;最后,确定跟踪输出的文本的颜色、尺寸和运动方式。本文方法可以很好地跟踪平移、缩小或放大、旋转、淡入淡出和部分被遮挡的水平或倾斜排列的文本,并且可以记录文本平移、旋转和缩放的速度。     

Generalized extreme learning machine acting on a metric space

Functional data learning is an extension of traditional data learning, that is, learning the data chosen from the Euclidean space ${\mathbb{R}^{n}}$ to a metric space. This paper focuses on the functional data learning with generalized single-hidden layer feedforward neural networks (GSLFNs) acting on some metric spaces. In addition, three learning algorithms, named Hilbert parallel overrelaxation backpropagation (H-PORBP) algorithm, ν-generalized support vector regression (ν-GSVR) and generalized extreme learning machine (G-ELM) are proposed to train the GSLFNs acting on some metric spaces. The experimental results on some metric spaces indicate that GELM with additive/RBF hidden-nodes has a faster learning speed, a better accuracy, and a better stability than HPORBP algorithm and ν-GSVR for training the functional data. The idea of GELM can be used to extend those improved extreme learning machines (ELMs) that act on the Euclidean space ${\mathbb{R}^{n}, }$ such as online sequential ELM, incremental ELM, pruning ELM and so on, to some metric spaces.     

基于运动信息自适应的快速运动估计算法

UMHexagonS是H.264视频编码标准中所采用的快速整像素运动估计算法,但在许多实时场景的应用中,该算法还明显存在搜索点数过多、搜索速度较慢的缺憾,急需进一步的改进和优化。在UMHexagonS算法的基础上,提出一种基于运动信息自适应的快速运动估计算法。使用动态搜索窗为不同尺寸的块自适应地分配预测搜索窗;根据当前块的运动剧烈程度选择运动类型自适应的搜索方案;通过分析实际运动序列水平、垂直方向的偏向特性依次采用带方向的十字型搜索和自适应的矩形—菱形搜索;利用预测运动矢量的方向信息采用自适应的多层次八边形区域搜索;并依据块的尺寸大小采用自适应的六边形搜索。实验结果表明,本文算法相比于UMHexagonS算法而言,图像的峰值信噪比(PSNR)平均提高了0.0125 dB,同时运动估计时间减少了13%32%,其场景自适应能力和实时性能都得到了很大的增强。     

电沉积Co-Mo合金薄膜的结构和热稳定性

通过电沉积,在铜基体上制备了Co-Mo合金薄膜.讨论了薄膜组成与结构以及非晶合金的晶体结构与热处理温度的关系.测定了薄膜磁性能(饱和磁化强度和矫顽力)随热处理温度变化的关系曲线.结果表明,薄膜中钼含量(质量分数)为6.05%～30.03%时,镀态Co-Mo合金薄膜具有非晶态结构;经连续升温到400℃并热处理1.5 h后,Co-Mo非晶态合金发生晶化,且随着薄膜中钼含量的增加,薄膜的晶化温度提高,热稳定性增强;在较高温度(高于500 ℃)下热处理后,Co-Mo非晶态合金晶化,并析出单一的hcp-Co相;热处理后,Co-Mo合金薄膜的软磁性变差.     

基于电子印刷工艺的薄膜热电偶研制

薄膜热电偶由于具有体积小、热容量小及响应速度快等优点成为近年来学者们研究的重点。薄膜制备常用的方法有射频溅射法、离子镀膜法以及直流脉冲磁控溅射法等,但这些方法操作设备复杂,制作时间长,效率低,成功率低且复现性差。用电子印刷工艺制备薄膜热电偶,将Au,Pt的溶液化微纳米材料印制在基板上,印刷成为Au-Pt薄膜热电偶,该方法操作方便快捷,对电极材料污染小。通过试验证明:采用电子印刷工艺制备的Au-Pt薄膜热电偶符合Au-Pt热电偶检定规程的要求,热电偶精度高,重复性和一致性好。