Remarkably enhanced energy storage properties of lead-free Ba0.53Sr0.47TiO3 thin films capacitors by optimizing bottom electrode thickness

The lead-free Ba_0.53Sr_0.47TiO₃ (BST) thin films buffered with La_0.67Sr_0.33MnO₃ (LSMO) bottom electrode of different thicknesses were fabricated by pulsed laser deposition method on a (001) SrTiO₃ substrate. It was found that the roughness of electrode decreases and substrate stress relaxes gradually with the increase of LSMO thickness, which is beneficial for weakening local high electric field and achieving higher E_b. Therefore, the recoverable energy density (W_rec) of BST films can be greatly improved up to 67.3 %, that is, from 30.6 J/cm³ for the LSMO thickness of 30 nm up to 51.2 J/cm³ for the LSMO thickness of 140 nm after optimizing the LSMO thickness. Furthermore, the thin film capacitor with a 140 nm LSMO bottom electrode shows an outstanding thermal stability from 20 °C to 160 °C and superior fatigue resistance after 10⁸ electrical cycles with only a slightly decrease of W_rec below 1.6 % and 3.7 %, respectively. Our work demonstrates that optimizing bottom electrodes thickness is a promising way for enhancing energy storage properties of thin-film capacitors.     

A new decomposition based evolutionary algorithm with uniform designs for many-objective optimization

For many-objective optimization problems, how to get a set of solutions with good convergence and diversity is a difficult and challenging work. In this paper, a new decomposition based evolutionary algorithm with uniform designs is proposed to achieve the goal. The proposed algorithm adopts the uniform design method to set the weight vectors which are uniformly distributed over the design space, and the size of the weight vectors neither increases nonlinearly with the number of objectives nor considers a formulaic setting. A crossover operator based on the uniform design method is constructed to enhance the search capacity of the proposed algorithm. Moreover, in order to improve the convergence performance of the algorithm, a sub-population strategy is used to optimize each sub-problem. Comparing with some efficient state-of-the-art algorithms, e.g., NSGAII-CE, MOEA/D and HypE, on six benchmark functions, the proposed algorithm is able to find a set of solutions with better diversity and convergence.     

Non-equilibrium effects on electronic transport in organic field effect transistors

Non-ideal behavior in organic field effect transistors, in particular threshold voltage drift and light sensitivity, is argued to be due to intrinsic carrier dynamics. The discussion is based on the theory for hopping transport within a Gaussian density of states. Carrier concentration is shown to be of fundamental importance, and the time required to reach equilibrium at different bias is responsible for device behavior, with implications for mobility evaluation. Experimental results from various conjugated polymers in a field effect transistor illustrate the theory.     

光催化降解废气过程中紫外辐射照度模拟和优化

为在光催化设计中合理布置紫外灯,减少光在传输过程中的损失,概括总结径向辐射模型、多点源叠加近似辐射模型和离散坐标辐射模型等3种经典的紫外辐射物理模型;基于离散坐标辐射模型模拟某公司生产的光催化氧化废气处理装置的紫外辐射照度;通过调整灯管布置距离改变光强分布,并拟合光催化单元和光催化网表面的平均紫外辐射照度随灯管布置距离变化曲线.结果表明,距离参数在55～65 mm时,该光催化反应装置的光能利用率较好;紫外灯的合理布置可有效提高光能利用率.     

基于M-CDIO的C语言课程教学研究

提出了基于CDIO工程教育模式的本地化和微型化教学模式(M-CDIO),并将其运用于C语言程序设计课程教学过程中;重新修改和设置了教学目标、教学内容、教学体系、教学方法和团队项目等:课程组织方式以微型项目为导向而不沿用传统的知识点导向,知识内容为集成的而非传统的知识与能力割裂的,等等.这些创新对深化工程课程教学改革具有实际意义.     

中国煤电生命周期二氧化碳和大气污染物排放相互影响建模分析

煤电在中国电力供应结构中占据主导地位,其环境影响是研究热点之一。建立中国煤电生命周期二氧化碳和大气污染物排放分析模型,基于文献调研构建参数数据库,测算中国煤电的单位发电量排放。结果表明,近年来中国煤电生命周期单位发电量的CO₂、SO₂、NO_x和PM_2.5排放分别为838.6 g/（kW·h）、0.34 g/（kW·h）、0.32 g/（kW·h）和0.08 g/（kW·h）。其中煤电单位发电量大气污染物排放,比实施超低排放改造前,下降幅度超过90%。研究发现,增大单机机组规模和进行超低排放改造能够有效降低煤电发电过程的大气污染物排放,采用煤电燃烧后碳捕集和存储(carbon capture and storage, CCS)处理技术能够使煤电CO₂排放下降到144 g/（kW·h）,助力碳中和目标实现。如果不采用更加严格的大气污染物排放标准和处理方式,CCS技术可能会使煤电大气污染物排放强度上升30%~40%,这与碳捕集过程使用的技术有关。     

等效梁法及其在柔性铰链机构中的应用

文章讨论了等效梁法的基本原理，然后以双平行四杆柔性铰链机构为例分析其位移性能；采用该方法进行有限元建模，一个柔性铰链由4个梁单元组成，因而，整个柔性铰链机构的单元数很少。分析结果表明：等效梁法仿真效率高，且有很高的精度。这一点对于仿真分析复杂的柔性铰链机构非常重要。     

凝固条件对纤维素/丝素蛋白纤维相形态及性能的影响

蛋白质纤维具有光滑柔顺、透气吸湿等优点,然而天然蛋白纤维产量有限。再生蛋白纤维的制备通常采用与其它成纤高分子接枝或共混的方法,有利于提高再生蛋白纤维的断裂强度。选用同为天然高分子的纤维素为基体,以共溶剂溶解纤维素与蛋白质,进而纺丝成形制得力学性能满足要求的纤维素/丝素蛋白共混纤维。为了探究凝固剂组成对纤维素/丝素蛋白共混纤维相形态及性能的影响,选用水、乙醇、乙醇/1-丁基-3-甲基咪唑氯盐([BMIM]Cl)等作为凝固剂。研究发现:乙醇作为凝固剂时,纤维素与丝素蛋白能很好地同时凝固;而当在乙醇凝固浴中加入适量的[BMIM]Cl径向均匀分散。通过对凝固剂组成的调控能有效提升纤维的力学强度。     

Molecular solutions for minimum and exact cover problems in the tile assembly model

The tile assembly model is a novel biological computing model where information is encoded in DNA tiles. It is an efficient way to solve NP-complete problems due to its scalability and parallelism. In this paper, we apply the tile assembly model to solve the minimum and exact set cover problems, which are well-known NP-complete problems. To solve the minimum set cover problem, we design a MinSetCover system composed of three parts, i.e., the seed configuration subsystem, the nondeterministic choice subsystem, and the detection subsystem. Moreover, we improve the MinSetCover system and propose a MinExactSetCover system for solving the problem of exact cover by 3-sets. Finally we analyze the computation complexity and perform a simulation experiment to verify the effectiveness and correctness of the proposed systems.     

考虑纤维波动[＋φ／-φ]缠绕角管件的轴向弹性模量计算方法

本文在计算[ φ/-φ]缠绕角管件的轴向弹性模量时,通过引入纤维波动程度参数来计入纤维波动的影响,理论计算结果与层板理论计算结果相比更接近实验结果,说明本文提出的算法,可在一定程度上计入纤维波动的影响。