Changes in the content and antioxidative activity of β-carotene and its metabolite vitamin A during gastrointestinal digestion and absorption and optimisation of HPLC-based detection

The β-Carotene (BC), an important precursor of vitamin A (VA), possesses antioxidant activity but is fat-soluble and has low bioavailability. In previous in-vitro assays evaluating antioxidant and 2,2′-azobis(2-amidinopropane) dihydrochloride (AAPH) free radical scavenging, both BC and VA showed a strong ability to scavenge radicals and protected cells from oxidative stress. Here, we used artificially simulated gastrointestinal digestion and Caco-2 cell absorption models to evaluate the bioavailability of the BC during gastrointestinal digestion and absorption using high-performance liquid chromatography (HPLC) analysis. We observed high absorptive and transfer rates of BC and detected retinol metabolites (Vitamin A). Therefore, BC can be detected in the acidic gastrointestinal environment using HPLC. Optimised method provided better separation of BC and VA in the column, improving the accuracy of the test results.     

Self-healing,elastic and deformable novel composite phase change polymer based on thermoplastic elastomer SEBS for wearable devices

Journal of Materials Science - Form-stable composite phase change materials (C-PCMs) prepared by microencapsulation method and porous matrix adsorption method need for compression molding after...     

Simultaneous improvement of thermal conductivity and mechanical properties for mechanically mixed ABS/h-BN composites by using small amounts of hyperbranched polymer additives

Recently, thermal interface materials (TIMs) are in great demands for modern electronics. For mechanically mixed polymer composite TIMs, the thermal conductivity and the mechanical properties are generally lower than expected values due to the sharply increased viscosity and poor filler dispersion. This work shows that addition of a small amount of polyester-based hyperbranched polymer (HBP) avoided the trade-off in mechanically mixed ABS/hexagonal boron nitride (h-BN) composites. After adding 0.5 wt% HBP, the maximum h-BN content in the composites increased from 50 to 60 wt%. The out-of-plane, in-plane thermal conductivity, and tensile strength of ABS/h-BN with 50 wt% h-BN were 0.408, 0.517 W/mK, and 18 MPa, respectively, and were increased to 0.729, 0.847 W/mK, and 32 MPa by adding 0.5 wt% HBP, while 0.972, 1.12 W/mK, and 29.5 MPa were achieved for ABS/h-BN/HBP with 60 wt% h-BN. The morphological and rheological results proved that these enhancements are due to the improved h-BN dispersion by decreasing viscosity of composites during mixing. Theoretical modeling based on the modified effective medium theory confirmed such results and showed that the interfacial thermal resistance also decreased slightly. Thus, this work demonstrates a facile and scalable method for simultaneously improving the thermal conductivity and mechanical properties of thermoplastic-based TIMs.     

Synthesis,characterization and antifungal property of Ti3C2Tx MXene nanosheets

Although the antibacterial properties of MXene nanosheets containing Ti₃C₂T_x are known, their antifungal properties have not been well studied. Herein, we present for the first time a report on the antifungal properties of Ti₃C₂T_x MXene. The Ti₃C₂T_x MXene was obtained by first exfoliating MAX phase of Ti₃AlC₂ with concentrated hydrofluoric acid, then the Ti₃C₂T_x was intercalated and deliminated by ethanol treatment and ultrasonication process. The delaminated Ti₃C₂T_x MXene nanosheets (d-Ti₃C₂Tx) were characterized using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), X-ray diffraction spectroscopy (XRD), and Raman spectroscopy. It was found that Ti₃C₂T_x MXene was characterized by lamellar structure alternating with layers of Ti, Al and C. The EDX results revealed that the delaminated Ti₃C₂T_x MXene nanosheets were composed of Ti, C, Si, O, F, and a trace amount of Al. The XRD and Raman spectra further indicated the elimination of Al and the formation of two-dimensional Ti₃C₂T_x MXene nanosheets. The antifungal activity of the delaminated Ti₃C₂T_x MXene was determined against Trichoderma reesei using the modified agar disc method. Observation using inverted phase contrastmicroscopy revealed inhibited fungus growth with the absence of hyphae around the discs treated wtih MXene. The surrounding of the control groups without an inclusion of MXene was found with large number of hyphae and spores. In addition, the spores of the fungi treated with the samples containing d-Ti₃C₂T_x MXene nanosheets did not germinate even after 11 days of culture. The results demonstrated disruption to the hemispheric structural formation of fungi colony, inhibition of hyphae growth and cell damage for fungi grown on the d-Ti₃C₂T_x MXene nanosheets. These new findings suggest that d-Ti₃C₂T_x MXene nanosheets developed in this work could be a promising anti-fungi material.     

Evolution mechanism of the microstructure and mechanical properties of plasma-sprayed yttria-stabilized hafnia thermal barrier coating at 1400 °C

Yttria stabilized hafnia (Hf_0.84Y_0.16O_1.92, YSH16) coatings were sprayed by atmospheric plasma spraying (APS). The effects of thermal aging at 1400 °C on the microstructures, mechanical properties and thermal conductivity of the coatings were studied. The results show that the as-sprayed coating was composed of the cubic phase, and the nano-sized monoclinic (M) phase was precipitated in the annealed coating. The presence of M phase effectively constrained the sintering of the coating due to its superior sintering-resistance. The Young's modulus kept at a nearly same level of ~78 GPa even after annealing, and the coating annealed for 6 h yielded a maximum value of hardness but revealed a declining tendency in the Vicker's hardness with prolonged sintering time. The thermal conductivity increased from 0.8-0.95 W m^-1 K^-1 at as-sprayed state to 1.6 W m^-1 K^-1 after annealing at 1400 °C for 96 h. The dual-phase coating is promising to serve at temperatures above 1400 °C due to its excellent thermal stability and mechanical properties.     

Construction of BiVO4 microspheres sensitized TiO2 NTAs for the enhanced photocatalytic mineralization of organic dyes

In the present work, BiVO₄ microspheres were deposited on TiO₂ NTAs via the solvothermal method using urea as the mineralizer. The binary heterojunction formation significantly enhanced the solar response region and intensity, and the electron transfer path was built at the interface of two semiconductors, which was the main reason for the enhanced photoelectrochemical and photocatalytic performances. The S-2 electrode prepared with urea concentration of 2 mol/L displayed the high visible light photocurrent of 73.76 μA/cm² and photovoltage of −0.30 V. Furthermore, the S-2 photocatalyst also showed excellent photocatalytic decoloration ability of MO, RhB and MB dyes, and the corresponding decomposition efficiencies were 55.82%, 41.62% and 89.90% under solar irradiation. Except for the organic dyes, Cr(VI) ions also could be reduced into Cr(III), and the photocatalytic efficiency achieved 74.05% after 3 h solar irradiation. The active group and photocatalytic mechanism were proposed to illuminate the essential reason. The experimental results indicated that the novel BiVO₄/TiO₂ NTAs with binary heterojunction are attractive photocatalysts for the dyeing and printing water treatment.     

Self-terminated electrodeposition of platinum on titanium nitride for methanol oxidation reaction in acidic electrolyte

The development of high-performance electrocatalysts for methanol oxidation is an urgent task to enhance the efficiency of direct methanol fuel cells. We report a simple and controllable method to fabricate Pt-decorated TiN electrocatalysts using self-terminated electrodeposition at room temperature and ambient pressure. Under optimized deposition parameters such as electrolyte pH, TiN substrate pretreatment, and pulsed deposition potential, quenching of the Pt electrodeposition facilitates obtaining an extremely low Pt mass loading (0.93 μg/cm²) on the TiN substrate. Repeated deposition potential pulses enable a gradual increase in Pt loading, with a precise control of the loaded Pt mass. Maximum intrinsic and mass activities for the methanol oxidation reaction are achieved for the catalyst with a Pt loading mass of 55.0 μg/cm², prepared by 20 deposition pulses. The maximum intrinsic activity achieved with the Pt-decorated TiN electrocatalyst is five times higher than that obtained with bulk Pt. The present results thus provide a facile method for the fabrication of cost-effective electrocatalysts.     

Notch radius effect on fracture toughness of ceramics pertinent to grain size

Unlike fracture toughness, the notch fracture toughness of a ceramic is not a constant; rather, it increases with the notch-root radius ρ in a notched specimen. In this study, by analyzing the fracture measurements of eight different notched ceramics with an average grain size G of 3–40 μm, a simple model describing the relation between the notch fracture toughness and fracture toughness is proposed as a function of the relative notch-root radius ρ/G. The normal distribution is incorporated to consider the inevitable scatter in measurements where fracture mechanisms and errors are present. The results demonstrate that the model can effectively predict the quasi-brittle fracture variation trend for ceramics, including the upper and lower bounds, with 96% reliability, from a normal distribution; thus, it can address virtually all of the experimental data. We also determined that the notch fracture toughness approximates the fracture toughness if ρ ≤ G.     

ZSM-5沸石膜用于生物油的脱水分离及其再生过程研究

在水热条件下通过无模板剂法合成了连续的ZSM-5沸石膜，并将其用于生物油的渗透汽化以进行高效脱水分离。ZSM-5沸石膜在强酸性、多组分的生物油体系中保持了很好的化学稳定性和优异的分离选择性，但在分离过程中面临着较强的膜污染问题，导致了膜通量的大幅下降。ZSM-5沸石膜的再生研究表明，膜的渗透通量随着再生温度的升高而逐渐提高。当再生温度为220℃时，ZSM-5沸石膜的渗透通量可以恢复至初始的88%。再生的机理研究表明，ZSM-5沸石膜中大量的晶内孔在生物油体系中极易被污染，从而导致渗透通量迅速下降；而相对较大的晶间孔却难以被完全堵塞，水分子在被污染的ZSM-5沸石膜中主要通过晶间孔进行渗透。上述结果表明，通过合理调控ZSM-5沸石膜的晶间孔的数量和尺寸大小可有效提升ZSM-5沸石膜在生物油中的渗透汽化脱水分离性能。     

Optimal pixel aspect ratio for enhanced 3D TV visualization

In multiview 3D TV, a pair of corresponding pixels in adjacent 2D views contributes to the reconstruction of voxels (3D pixels) in the 3D scene. We analyze this reconstruction process and determine the optimal pixel aspect ratio based on which the estimated object position can be improved given specific imaging or viewing configurations and constraints. By applying mathematical modeling, we deduce the optimal solutions for two general stereo configurations: parallel and with vergence. We theoretically show that for a given total resolution a finer horizontal resolution, compared to the usual uniform pixel distribution, in general, provides a better 3D visual experience for both configurations. The optimal value may vary depending on different configuration parameter values. We validate our theoretical results by conducting subjective studies using a set of simulated non-square discretized red–blue stereo pairs and show that human observers indeed have a better 3D viewing experience with an optimized vs. a non-optimized representation of 3D-models.