A novel method of shrimp blanching by CO2 heat pump: Quality,energy, and economy analysis

To reduce the energy consumption of the shrimp blanching process and improve the economic value of the blanched product, a transcritical CO₂ heat pump blanching system (THPB system) was designed in this paper. The trends of astaxanthin were investigated at atmospheric pressure near boiling temperature, combined with the color and structural properties of shrimp samples, and the optimal blanching times of 270 s and 240 s were obtained at 90°C and 95°C, respectively. In contrast to the fuel blanching system (FB system) at 100°C, the annual standard coal consumption of the THPB system with 90°C blanching is decreased by 79%, and the annual operating cost can be saved by CNY 63,800, with a payback period of about 3.13 years.Industrial relevanceBlanching is one of the effective ways to prolong the shelf life of shrimp. However, the research on the blanching time and temperature of shrimp is not comprehensive. In addition, the traditional fuel blanching process has high energy consumption and pollution, and can no longer meet the quality requirements of the modern food processing industry. Heat pump has been shown to have better performance in food drying, but it is less used in blanching. The information presented in this study may provide other insights into food processing.     

A robust method for axis identification

The present paper proposes a new method for axis identification in discrete axially symmetrical geometric models. This method is based on-a-never-used-before property of the axially symmetrical surfaces for which the symmetry line of any section curve of the surface (or of a portion of it in the case of an incomplete axially symmetrical surface) always intersects the axis of symmetry of the surface. Thus the working principle of the method makes it very robust to local defectiveness, measurement noise and outliers.In order to compare it with the most cited methods presented in literature, several types of tests have been designed and performed. The robustness of those methods, on the one hand, has been evaluated by defining the Statistical Confidence Boundary at 1σ confidence level. The trueness of the method, on the other hand, has been evaluated on geometric models obtained by measuring real objects. The high robustness, which characterizes the proposed method, makes it particularly suitable for product geometric inspection where high accuracy is required.     

Rip currents near coastal structures in Lake Michigan: Characterization and assessment for warnings

Rip currents near coastal structures commonly occur in Lake Michigan in the Great Lakes region of the United States. Lack of timely warning due to undocumented characteristics of rip currents and no assessment tool can contribute to tragic drownings incidents. In this paper, we characterized rip current occurrences near breakwater structures and developed an assessment tool for providing timely rip current warnings to beachgoers at the study site, City of Port Washington, WI. Characteristics of rip currents near the structure were observed from field measurements or visual images. Deflection rip currents had speeds of ～ 0.2 m/s and lasted for several hours. The rip current occurrences were associated with environmental proxies. It was found that rip currents can occur even when the water appears calm near the structure. A Structure Rip Checklist and Assessment Matrix (SRiCAM) with a four-tiered risk was developed and validated using observations. Furthermore, the SRiCAM was integrated into cyberinfrastructure with a data contingency plan to provide real-time warnings to the public. The applicability of the SRiCAM to other locations across Lake Michigan was further tested and results are promising. Overall, the SRiCAM has the potential to be widely extended to foster recreational water safety and resilience to rip current hazards in the Great Lakes.     

Multiplex PCR system to track authorized and unauthorized genetically modified soybean events in food and feed

A diverse range of genetic elements has been used to develop genetically modified organisms (GMOs) over the last 18 years. Screening methods that target few elements, such as the Cauliflower Mosaic Virus 35S promoter (P-35S) and Agrobacterium tumefaciens nopaline terminator (T-nos), are not sufficient to screen GMOs. In the present study, a multiplex PCR system for all globally commercialized GM soybean events was developed to easily trace the events. For this purpose, screening elements of 24 GM soybean events were investigated and 9 screening targets were selected and divided into three individual triplex PCR systems: P-35S, ribulose-1,5-bisphosphate carboxylase small subunit promoter of Arabidopsis thaliana, T-nos, T-35S, pea E9 terminator, open reading frame 23 terminator of A. tumefaciens, proteinase inhibitor II terminator of potato, acetohydroxy acid synthase large subunit terminator of A. thaliana, and the revealed 3′ flanking sequences of DP-305423-1. The specificity of the assays was confirmed using thirteen GM soybean events as the respective positive/negative controls. The limit of detection of each multiplex set, as determined using certified reference materials of specific GM events, ranged from 0.03 to 0.5%, depending upon target. Furthermore, 26 food samples that contained soybean ingredients, which were purchased from the USA, China, Japan, and Korea, were analyzed, 17 of which contained one or more GM soybean events. These results suggest that the developed screening method can be used to efficiently track and identify 24 GM soybean events in food and feed.     

Solid–liquid phase equilibria of binary indole mixtures with some aromatic compounds using a solid–liquid–vapor equation-of-state

The separation of useful chemicals, such as indole from coal tar, is an important subject of research in the field of fossil energy, renewable energy, and utilization of byproducts and waste materials. High-pressure crystallization is one of the proposed separation methods. To understand the process requires detailed knowledge of solid–liquid phase behaviors. Solid–liquid phase equilibrium data of various binary mixtures of indole have been reported in the literature. In the present report, we analyze some of the experimental data with our unified solid–liquid–vapor equation-of-state to see whether our model can be useful for the calculation of solid–liquid equilibria in these organic systems. Good correlations of the data and predictions of phase behavior, at very high pressures, are demonstrated.     

Effect of charge trapping species of cupric ions on the photocatalytic oxidation of resorcinol

The photocatalytic oxidation of resorcinol, a potent endocrine disrupting chemical, in oxygenated aqueous suspensions of pure and cupric ions modified Degussa P25 titanium dioxide has been investigated at pH 3.0 ± 0.5. The initial rate of photocatalytic oxidation of resorcinol increased until an optimum dissolved cupric ions concentration was reached at 1.04 mM. At the optimum concentration of cupric ions, the initial rate of photocatalytic mineralisation and degradation of resorcinol was improved by 400%. The observed beneficial effect of cupric ions on the initial rate of resorcinol oxidation could be attributed to the formation of complex and its participation in the photoredox cyclic reaction.Two of the initial oxidation intermediates detected were 1,2,3-trihydroxybenzene and 1,2,4-trihydroxybenzene. These intermediates were formed via hydroxylation of the aromatic ring of resorcinol. Evidences have revealed that 1,2,4-trihydroxybenzene interacted strongly with cupric ions forming copper(II)-trihydroxybenzoate complexes that possessed good adsorption onto TiO₂ surface. These dual-effects help to draw the metal ions closer to the photocatalyst surface and subsequently trigger the electron trapping mechanism by cupric ions. As a result, this improved the charge carriers’ separation. Furthermore, in the presence of oxygen, reoxidation of photoreduced cupric ions occurred and this eliminated the possibility of copper photodeposition, while inducing a photoredox cyclic reaction to regenerate copper species that may potentially act as co-catalyst for the oxidation of 1,2,4-trihydroxybenzene. In contrast, no obvious complex formation was seen between 1,2,3-trihydroxybenzene and cupric ions. This pointed to an intriguing finding which indicates that the positioning of functional group on benzene ring influences the role of cupric ions.     

Elastic and optical properties of BeS,BeSe and BeTe under pressure

We have performed the first principles full-potential linearized augmented plane wave calculations (FP-LAPW) with density functional theory in local density approximations (LDA), in aim to determine and to predict the pressure dependence of structural and optical properties of zinc-blende BeS, BeSe and BeTe compounds. The elastic constant, refractive index and its variation with hydrostatic pressure are well described.     

An efficient face segmentation algorithm based on binary partition tree

This paper presents an efficient face segmentation algorithm based on binary partition tree. Skin-like regions are first obtained by integrating the results of pixel classification and watershed segmentation. Facial features are extracted by the techniques of valley detection and entropic thresholding, and are used to refine the skin-like regions. In order to segment the facial regions from the skin-like regions, a novel region merging algorithm is proposed by considering the impact of the common border ratio between adjacent regions, and the binary partition tree is used to represent the whole region merging process. Then the facial likeness of each node in the binary partition tree is evaluated using a set of fuzzy membership functions devised for a number of facial primitives of geometrical, elliptical and facial features. Finally, an efficient algorithm of node selecting in the binary partition tree is proposed for the final face segmentation, which can exactly segment the faces without any underlying assumption. The performance of the proposed face segmentation algorithm is demonstrated by experimental results carried out on a variety of images in different scenarios.     

Groundwater-surface water interactions and agricultural nutrient transport in a Great Lakes clay plain system

Nutrient export from agricultural land to surface waters is a significant environmental concern within the Great Lakes Basin (GLB). A field-based watershed-scale study was completed to investigate spatial and temporal variations of phosphorus and nitrate to assess nutrient transport pathways and groundwater-surface water interactions in an agriculturally dominated clay plain system. This was conducted in the 127 km² Upper Parkhill Watershed, near Lake Huron in southwestern Ontario, Canada. Data collection occurred from June 2018 to May 2019 via continuous sensor deployment and discrete sampling of stream water, groundwater, hyporheic zone, and tile drainage water. Samples were analyzed for various nutrient species (total, total dissolved, soluble reactive, and particulate phosphorus, and nitrate-N) to examine the hydrological dynamics of principal transport pathways of agriculturally-derived nutrients. Total phosphorus and nitrate concentrations in stream water ranged from 0.007 to 0.324 mg/L and 0.32 to 13.13 mg NO₃^?-N/L, respectively. Tile drainage water total phosphorous concentrations varied from 0.006 to 0.066 mg/L. Groundwater total dissolved phosphorus concentrations ranged from <0.003 to 0.085 mg/L. Transport of phosphorus through tile drainage was observed to be greater than through groundwater over the study period. No distinct relationship was observed between nutrient concentrations in the hyporheic zone and the vertical hydraulic gradient within this zone in the studied stream reach. Preliminary correlations were discerned between water quality observations and recognized land management practices. Given the elevated stream nutrient concentrations, these results are consequential for the continual improvement of strategies and programs devised to conserve water resources within the GLB.     

Towards improving an Area of Concern: Main-channel habitat rehabilitation priorities for the Maumee River

The Maumee River watershed in the Laurentian Great Lakes Basin has been impacted by decades of pollution and habitat modification due to human settlement and development. As such, the lower 35 km of the Maumee River and several smaller adjacent watersheds comprising over 2000 km² were designated the Maumee Area of Concern (AOC) under the revised Great Lakes Water Quality Agreement in 1987. As part of pre-rehabilitation assessments in the Maumee AOC, we assessed fish and invertebrate communities in river km 24–11 of the Maumee River to identify: 1) areas that exhibit the highest biodiversity, 2) habitat characteristics associated with high biodiversity areas, 3) areas in need of protection from further degradation, and 4) areas that could feasibly be rehabilitated to increase biodiversity. Based on benthic trawl data, shallow water habitats surrounding large island complexes had the highest fish diversity and catch per unit effort (CPUE). Electrofishing displayed similar fish diversity and CPUE patterns across habitat types early in the study but yielded no discernable fish diversity or CPUE patterns towards the end of our study. Although highly variable among study sites, macroinvertebrate density was greatest in shallow water habitats <2.5 m and around large island complexes. Our results provide valuable baseline data that could act as a foundation for developing rehabilitation strategies in the lower Maumee River and for assessing the effectiveness of future aquatic habitat rehabilitation projects. In addition to increasing in-channel habitat, watershed-scale improvements of water quality might be necessary to ensure rehabilitation strategies are successful.