Numerical study on laminar burning velocity of ammonia flame with methanol addition

The combustion characteristics of ammonia/methanol mixtures were investigated numerically in this study. Methanol has a dramatic promotive effect on the laminar burning velocity (LBV) of ammonia. Three mechanisms from literature and another four self-developed mechanisms constructed in this study were evaluated using the measured laminar burning velocities of ammonia/methanol mixtures from Wang et al. (Combust.Flame. 2021). Generally, none of the selected mechanisms can precisely predict the measured laminar burning velocities at all conditions. Aiming to develop a simplified and reliable mechanism for ammonia/methanol mixtures, the constructed mechanism utilized NUI Galway mechanism (Combust.Flame. 2016) as methanol sub-mechanism and the Otomo mechanism (Int. J. Hydrogen. Energy. 2018) as ammonia sub-mechanism was optimized and reduced. The reduced mechanism entitled ‘DNO-NH3’, can accurately reproduce the measured laminar burning velocities of ammonia/methanol mixtures under all conditions. A reaction path analysis of the ammonia/methanol mixtures based on the DNO-NH3 mechanism shows that methanol is not directly involved in ammonia oxidation, instead, the produced methyl radicals from methanol oxidization contribute to the dehydrogenation of ammonia. Besides, NO_x emission analysis demonstrates that 60% methanol addition results in the highest NO_x emissions. The most important reactions dominating the NO_x consumption and production are identified in this study.     

Effect of structure on the properties of polyurethanes based on aromatic cardanol-based polyols prepared by thiol-ene coupling

Industrial-grade cardanol and 2-mercaptoethanol were reacted to generate hydroxyl-functionalized cardanol by UV, free-radical-initiated thiol-ene coupling between the double bond moieties of the cardanol long carbon side chain and thiol functional groups. The average hydroxyl number of the hydroxyl-functionalized cardanol was controlled by reaction time, with the hydroxyl values of this ranging within 168–201 mg KOH g⁻¹. This cardanol was then used as a polyol to prepare cardanol-based polyurethane with hexamethylene diisocyanate and a NCO/OH ratio of 1. To compare the effect of cardanol-based polyols with the properties of cardanol-based polyurethane, cardanol modified with 10-undecylenate was used as a raw material to prepare cardanol-based polyols, including the long carbon chain of 10-undecylenate. All properties were examined, and data revealed that cardanol-based polyols including this long carbon chain can improve the hydrophobic and mechanic properties of the cardanol-based polyurethane.     

单片机控制下液晶显示器的使用

介绍液晶显示器EDM12864B的原理及其在单片机控制下的简单应用。     

点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。     

Size-controlled preparation of polyelectrolyte-protected gold nanoparticles by natural sunlight radiation

By radiating a linear polyethylenimine–HAuCl₄ aqueous solution with natural sunlight, we obtained polyelectrolyte-protected gold nanoparticles, and the size of such gold nanoparticles can be controlled by varying the molar ratio of polyelectrolyte to gold.     

基于RBF网络和IMM的机动目标跟踪方法

文中提出了一种应用RBF神经网络对标准IMM算法中的卡尔曼滤波结果进行校正的方法。网络输人为预测误差、卡尔曼增益以及测量值与估计值之差．网络输出反映了由于目标机动所带来的滤波误差．将网络输出结果和直接由卡尔曼滤波求解得到的结果相加．可以得到更为准确的滤波值。同时．在网络的学习算法中．在网络权值矩阵的修正公式中增加了反映滤波残差的调整项．若卡尔曼滤波的残差较大，网络调整权值的幅度也相应增大。仿真结果表明．在目标发生机动转弯处．校正后的IMM算法的跟踪误差要明显小于标准IMM算法的跟踪误差．跟踪精度较高。     

Effect of Magnetic Interaction on Thermally Activated Reversal in a Magnet With a Distribution of Energy Barriers

The time dependence of magnetization is usually expressed as M(t)=M₀-SInt [see Proc. Phys. Soc. 62, 562 (1949)] for magnetic viscosity experiments. Considering magnetic interaction during the thermal activation process, a form as M(t)=M₀-SIn(t+t₀) is deduced. The dipolar interaction and exchange coupling in a magnet can lead to positive and nonpositive t₀, respectively. In the experiments of the magnetic viscosity for nanocrystalline Pr₂Fe₁₄B ribbons, the existence of positive t₀ is confirmed.     

基于SQL Server的OLAM的研究及应用

OLAM(On-line Analytical Mining)是当前的热点技术,是融合了联机分析处理(OLAP)和数据挖掘(Data Mining)的一种新的数据挖掘技术。本文主要研究数据仓库中OLAP,On-line Analytical Processing和数据挖掘技术,这两个技术是商业智能中的核心技术和主要内容,在两者的基础上引入OLAM的概念,并阐述其基本原理和核心技术。基于微软的SQL Server平台,为一个商业案例建立数据仓库,利用Analysis Services服务,建立销售分析的多维数据集,利用OLAM的基本模型实现OLAP和聚类挖掘技术的结合,借助两者的各自优势,得到很好的客户聚类分析结果。     

基于PSO-GA混合算法的物流中心选址模型研究

物流中心的布局决定了整个物流网络的结构、模式和形状,其合理性是有效保障物资的基本前提。针对问题的特点,在合理假设的前提下,给出了选址问题的模型,并以物流成本最低为目标函数运用人工智能领域的前沿算法——微粒群算法(PSO)与遗传算法(GA)的混合算法来求解。实例证明,该算法求解此类问题的性能优于传统的PSO和GA,搜索能力较,且收敛速度较快且不易陷入局部最优。