Eco-friendly tape casting of borosilicate glass/Al2O3 sheets for LTCC applications

This work reports the innovative development of a borosilicate glass/Al₂O₃ tape for LTCC applications using an eco-friendly aqueous tape casting slurry. Polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) were the respective dispersants, while carboxymethyl cellulose (CMC) and styrene acrylic emulsion (SA) were the respective binders. The results showed that PVP was more suitable than PAA as the dispersant for the aqueous casting slurry, and that 1.5 wt% PVP would achieve well dispersion of CABS glass/Al₂O₃ powder in the aqueous slurry. Moreover, a small amount of 2.0 wt% CMC binder could yield smooth CABS glass/Al₂O₃ tapes crack free. A high-quality CABS glass/Al₂O₃ tape with a smooth surface was made from an aqueous slurry containing 1.5 wt% PVP dispersant, 2.0 wt% CMC binder, and 2.0 wt% PEG-400 plasticizer. The density, tensile strength, and surface roughness of the green tape were 2.05 g/cm³, 0.87 MPa, and 148 nm, respectively. The resulting CABS glass/Al₂O₃ composites sintered at 875 °C exhibited a bulk density of 3.14 g/cm³, a dielectric constant of 8.09, a dielectric loss of 1.0 × 10^?3, a flexural strength of 213 MPa, a thermal expansion coefficient of 5.30 ppm/^°C, and a thermal conductivity of 3.2 W m^?1 K^?1, thus demonstrating its broad prospects in LTCC applications.     

三种硫化氢吸收剂吸收效率对比及碘酸钾体系吸收条件优化研究

硫化氢具有腐蚀性与毒性，采用吸收剂吸收硫化氢气体是重要的脱硫处理方式。不同的吸收剂在吸收效率上存在较大差别。首先对比了三氯化铁体系、碘酸钾体系和碱性铁氰化钾体系三种不同硫化氢吸收剂的吸收效率。在此基础上重点优化了碘酸钾体系吸收条件参数，讨论了包含浓度、温度、pH、气体流量及时间等因素对硫化氢吸收效率的影响。并建立了四因素三水平正交试验研究较优吸收条件，得到正交试验优化吸收条件为：温度55℃，pH 6.01，硫化氢流量0.3 L·min^-1，吸收时间1 min，该条件下8%（质量）碘酸钾体系的三级吸收效率为51.56%。研究结果对硫化氢吸收处理提供了理论参考，也为间接电解法循环处理研究提供了支持。     

Electronic structure and absolute band edge position of tetragonal AgInS2 photocatalyst: A hybrid density functional study

Energy bands, effective mass of carriers, absolute band edge positions and optical properties of tetragonal AgInS₂ were calculated using a first-principles approach with the exchange correlation described by B3LYP hybrid functional. The results indicate that tetragonal AgInS₂ has a direct band gap of 1.93 eV, which reproduce well experimental value. Calculated effective masses of electrons and holes are both small which are beneficial to separation and migration of electron and hole pairs. This implies that AgInS₂ has good photocatalytic performance. The calculated optical characteristics indicate that AgInS₂ has a slight anisotropy for both the real and imaginary parts of the dielectric function and exhibits large optical absorption in the visible light region. Furthermore, the calculated band edge positions in (100), (010) and (001) surfaces indicate that tetragonal AgInS₂ is beneficial to the reduction and oxidation of water to hydrogen and oxygen under visible light irradiation.     

燃料电池空气电极的孔道结构调控

燃料电池是将化学能转化成电能的装置，其空气电极催化层的设计，既要包含丰富的、易于接近的反应活性位，也要具备高度连通的电子、质子以及反应物、产物传质通道，因此电极必须具有特定三维几何结构形貌和有序分布的各功能化孔道，确保催化活性位得以充分利用以及反应可以连续进行。针对催化剂孔道的几何结构调控，本文调研了最近报道的一系列研究工作，从模板法、高温相变法、模板/相变复合方法以及基于金属有机框架材料进行孔道设计等四种主要方法出发，综述了该领域的最新研究进展。     

基于OH-PLIF的狭长受限空间油气爆炸中间基团浓度分布研究

为了精确测量狭长受限空间油气爆炸过程中的关键自由基团，从而实现对其爆炸流场、火焰传播的精确分析，基于先进的平面激光诱导荧光测量技术（PLIF），设计构建了油气爆炸PLIF测量系统，开展了不同工况下狭长受限空间汽油-空气混合气爆炸实验研究，获得了该爆炸中间基团OH基的浓度分布。实验结果表明，1.1%~2.4%（体积分数）油气浓度之间，OH基浓度先增大后减小；随火焰的传播发展，OH基浓度不断变大，表明爆炸不断强化；爆燃不同时期OH基分布情况不同，表明不同爆燃阶段的燃烧反应区域有较大差异；爆燃前期火焰与壁面之间有“隔离带”，是由未燃气浓度增大导致火焰传播变慢的结果。主要创新点在于通过设计时序控制子系统，解决了非稳态预混燃烧中自由基分布瞬态测量。     

规整有机分子自聚集体对铜的高效缓蚀的研究

通过多步法合成了离子型含双苯并三氮唑环的目标分子，4，4'-{苯-1，3-二基二[(1E)-3-羰基丙-1-烯-1，3-二基]}二[2-(2H-苯并三唑-2-基)苯醇酸]二钾。在室温条件下，目标分子在3.5%（质量）NaCl/DMSO（二甲基亚枫）混合溶液 （体积比：40/60） 中能够发生分子自组装产生纳-微米级的自聚集体。通过傅里叶变换红外光谱 （FT-IR）、拉曼光谱和X射线光电子能谱 （XPS） 的表征，证实了所形成的目标分子自聚集体能够对铜表面产生强烈的化学吸附作用，在铜表面形成自组装膜。利用电化学方法测定了目标分子自聚集体吸附在铜表面形成自组装膜后，在3.5%（质量）NaCl溶液中的缓蚀性能。结果表明目标分子自聚集体在NaCl溶液中能高效地抑制铜腐蚀。     

NH2-MCM-41的改性及其pH响应性释药的研究

采用正硅酸乙酯（TEOS）和3-氨丙基三乙氧基硅烷（APTES）通过共缩聚法合成介孔二氧化硅（MCM-41）。首先对其氨基修饰，再通过有机合成接枝—R基团（—R：—CHO、—OH、—CH₃、—COOH），制备得到Me-Ph-NH-MCM-41、OHC-Ph-NH-MCM-41、HO-Ph-NH-MCM-41、HOOC-Ph-NH-MCM-41四种不同的药物载体。利用FT-IR、Zeta电位、XRD和SEM对其结构和形貌表征，结果表明NH₂-MCM-41改性成功。以罗丹明B（RhB）为模型进行载药性能测试，并考察了此释药系统在模拟不同pH的体液下的敏感释药行为，同时探究了不同—R基团对释药的影响。结果显示，四种载体在中性条件下几乎不发生药物释放，通过改变环境体系pH可以有效控制药物释放，其释药行为可以用Korsmeyer-Peppas动力学模型来描述。实验表明，释药量：RhB@HOOC-Ph-NH-MCM-41>RhB@OHC-Ph-NH-MCM-41>RhB@HO-Ph-NH-MCM-41>RhB@Me-Ph-NH-MCM-41，不同—R基团的药物载体的pH响应性不同，其中RhB@HOOC-Ph-NH-MCM-41释药量在pH=1.2时可达57.87%，在用于药物智能控释材料方面具有一定的应用潜力。     

Nanostructured titanium nitride for highly sensitive localized surface plasmon resonance biosensing

Titanium nitride (TiN) as an alternative plasmonic ceramic material with superb properties including high hardness, outstanding corrosion resistance and excellent biocompatibility, has exhibited great potential for optical biochemical sensing applications. By sputtering about 35 nm–50 nm TiN on glass (f-TiN), the surface was found to provide sensing capability toward NaCl solution through the phenomenon of surface plasmon resonance. When the TiN film of about 27 nm–50 nm in thickness was sputtered onto a roughened glass surface (R–TiN), the sensing capability was improved. This was further improved when holes at nanoscale were created in the TiN film of about 19 nm–27 nm in thickness (NH–TiN). The roughened surface and nanohole patterns provided confinement of surface plasmons and significantly improved the sensitivity toward the local refractive index changes. In detail, the calculated refractive index resolution (RIR) of the optimal NH–TiN sensors for NaCl was found to be 9.5 × 10⁻⁸ refractive index unit (RIU), which had outperformed the f-TiN and R–TiN sensors. For biosensing, the optimized NH–TiN sensor was found to be capable to detect both small and large biomolecules, i.e. biotin (molecular weight of 244.3 g/mol) and human IgG (160,000 g/mol), in a label-free manner. Especially, the NH–TiN sensor significantly improved sensitivity in detecting small molecules due to the localized plasmonic confinement of electromagnetic field. Combining with the excellent mechanical and durability properties of TiN, the proposed NH–TiN can be a strong candidate for plasmonic biosensing applications.     

Synthesis of β-Ag2Se from organo-selenium precursor and silver nitrate in DMF via simultaneous reduction of selenium and silver salt

Reaction of selenium powder and silver nitrate in aqueous N, N′-dimethylformamide (aq. DMF) leads to formation of silver selenide. Similar reaction with cycloalkeno-1,2,3-selenadiazole, an organic compound of selenium upon thermolysis, also produces silver selenide. It is believed that DMF activates selenium and reduces silver salt via in-situ generated hydrogen ion simultaneously. Slightly broadened X-ray diffraction pattern for pure beta silver selenide (β-Ag₂Se) was observed. Scanning electron microscopy (SEM) indicated that the agglomerated particles could be in the range of about 100 to 200 nm in dimension. EDAX analysis showed non-stoichiometric elemental ratio between silver and selenium. It is found that the weight percent of Ag is slightly higher than Se. However, free amorphous selenium is also detected by XPS analysis when the product is made by use of elemental selenium. Thermal analysis (TGA) revealed a small (4%) weight loss due to the presence of organics or the solvent from the reaction medium.