M2M energy saving strategy in 5G millimeter wave system

Telecommunication Systems - Machine to Machine technology has a broad application prospect in the 5G network, but there is a bottleneck in the energy consumption of intelligent devices powered by...     

基于乙酰胆碱酯酶和氧化应激研究海胆酮对阿尔茨海默症的作用机制

海胆酮是一种酮式类胡萝卜素，主要从海胆及藻类等海洋生物中提取。本文研究海胆酮对乙酰胆碱酯酶（acetylcholinesterase，AChE）的抑制作用，应用酶动力学、荧光光谱、圆二色光谱和分子对接技术研究海胆酮对AChE的抑制机理，并用淀粉样β蛋白片段25～35（amyloid beta-peptide 25-35，Aβ25-35）诱导大鼠肾上腺嗜铬细胞瘤细胞（PC12细胞）建立阿尔茨海默症（Alzheimer’s disease，AD）模型，研究海胆酮对AD细胞模型氧化应激损伤的作用。结果表明，海胆酮有很强的AChE抑制活性，其半抑制质量浓度为（16.29±0.97）μg/mL，抑制常数Ki为3.82 μg/mL，表现为竞争性抑制；海胆酮可诱导AChE二级结构改变，更容易与AChE活性中心氨基酸Ser200、His440、Trp84和Tyr121结合，阻碍底物碘代硫代乙酰胆碱（acetylthiocholine iodide，ATCI）与酶结合，从而引起酶活力降低。海胆酮能有效抑制Aβ25-35诱导PC12细胞的AChE活力，降低丙二醛含量，增加超氧化物歧化酶、过氧化氢酶和谷胱甘肽过氧化物酶活力，减轻Aβ25-35诱导的PC12细胞氧化应激损伤。本研究基于AChE和氧化应激阐明了海胆酮对AD的潜在作用机制，为海胆酮在功能食品、生物医药等领域的应用提供了数据支持和理论根据。     

中国废钢资源发展战略研究

 为提高中国钢铁工业的废钢比,推动钢铁工业的绿色发展,分析了中国废钢资源的概况、废钢行业技术发展现状和钢铁工业废钢利用的现状,并对中国未来废钢资源量进行预测。在此基础上,针对中国废钢资源的发展提出了3条战略判断和6条政策建议。     

Unique CNTs-chained Li4Ti5O12 nanoparticles as excellent high rate anode materials for Li-ion capacitors

Composite anode materials with a unique architecture of carbon nanotubes (CNTs)-chained spinel lithium titanate (Li₄Ti₅O₁₂, LTO) nanoparticles are prepared for lithium ion capacitors (LICs). The CNTs networks derived from commercial conductive slurry not only bring out a steric hindrance effect to restrict the growth of Li₄Ti₅O₁₂ particles but greatly enhance the electronic conductivity of the CNTs/LTO composites, both have contributed to the excellent rate capability and cycle stability. The capacity retention at 30 C (1 C = 175 mA g^?1) is as high as 89.7% of that at 0.2 C with a CNTs content of 11 wt%. Meanwhile, there is not any capacity degradation after 500 cycles at 5 C. The LIC assembled with activated carbon (AC) cathode and such a CNTs/LTO composite anode displays excellent energy storage properties, including a high energy density of 35 Wh kg^?1 at 7434 W kg^?1, and a high capacity retention of 87.8% after 2200 cycles at 1 A g^?1. These electrochemical performances outperform the reported data achieved on other LTO anode-based LICs. Considering the facile and scalable preparation process proposed herein, the CNTs/LTO composites can be very potential anode materials for hybrid capacitors towards high power-energy outputs.     

Influence of surface topography evolution of grinding wheel on the optimal material removal rate in grinding process of cemented carbide

Most of the reported studies on the optimization of grinding parameters do not consider the evolution of the surface topography of grinding wheels, and the established empirical models will no longer apply when the surface conditions of the grinding wheel changes. In this paper, an integrated model based on the surface topography of grinding wheel is established. The grinding process of cemented carbide is simulated using the established model, and the simulation results are analyzed to obtain the surface roughness model and the specific grinding energy model based on the undeformed chip thickness distribution. Subsequently, the grinding constraint models are defined according to the two grinding constraints—surface roughness and specific grinding energy. Through inversion analysis, the maximum material removal rate of the given grinding wheel surface conditions satisfying the defined grinding constraints are obtained, and the influence rules of the grinding wheel surface conditions on the maximum material removal rate are analyzed. Then the grinding wheel surface conditions are adjusted by changing the radial dressed height of the grinding wheel and the arrangement distance of the grains in wheel circumferential direction to improve the maximum material removal rate of the grinding wheel. Finally, the optimization results are verified through grinding tests of cemented carbide.     

Restructuring bank networks after mergers and acquisitions: A capacitated delocation model for closing and resizing branches

During restructuring processes, due to mergers and acquisitions, banks frequently face the problem of having redundant branches competing in the same market. In this work, we introduce a new Capacitated Branch Restructuring Model which extends the available literature in delocation models. It considers both closing down and long term operations׳ costs, and addresses the problem of resizing open branches in order to maintain a constant service level. We consider, as well, the presence of competitors and allow for ceding market share whenever the restructuring costs are prohibitively expensive.We test our model in a real life scenario, obtaining a reduction of about 40% of the network size, and annual savings over 45% in operation costs from the second year on. We finally perform a sensitivity analysis on critical parameters. This analysis shows that the final design of the network depends on certain strategic decisions concerning the redundancy of the branches, as well as their proximity to the demand nodes and to the competitor׳s branches. At the same time, this design is quite robust to changes in the parameters associated with the adjustments on service capacity and with the market reaction.     

小流域氮流失特征及其影响因素

由非点源流失的氮是造成水体污染的主要因子之一，而土地利用方式往往对氮的流失产生重要影响。本课题在福建省九龙江流域遴选了4个不同土地利用方式的小流域，通过在自然降雨条件下现场采样与室内分析相结合，研究不同土地利用结构的小流域氮的流失特征和影响因素。研究结果表明：总氮、可溶态氮和泥沙结合态氮的浓度通常比径流先达到峰值，然后开始降低；氮的流失以可溶态氮为主(占73%～98.3％)，因此其流失量主要受径流量的影响与雨强关系不大；土地利用方式对氮的流失有明显影响，一般植被覆盖度提高可以降低流失，而农业活动会加剧流失；此外，在高植被覆盖度的天然林地，氮的流失呈现出以泥沙结合态为主。通过本研究可以看出土地利用结构的调整和合理布置是九龙江流域非点源污染控制的重点。     

Primary energy demand in Japan: an empirical analysis of long-term trends and future CO2 emissions

This paper examines the long-run relationship between energy demand, GNP and the real energy price in Japan using data covering 1887–2001. It is found that, if an Underlying Energy Demand Trend is appropriately incorporated, the resulting econometric model produces a long-run income elasticity of about unity and a long-run price elasticity of about–0.2. The estimated model is utilised to forecast energy consumption and CO₂ emissions up to 2012. It is shown that given current economic conditions and policies there is considerable uncertainty about whether Japan will be able to meet its Kyoto target by reducing CO₂ emissions in 2008–2012 to the 1990 level. It is shown that this uncertainty depends on the strength of the economy and leaves the Japanese government with a difficult policy dilemma. If there is a resurgence in growth to something near the annual average growth rate since the early 1980s a considerable effort will be required in order to meet its Kyoto target; requiring not only using the Kyoto Mechanisms, but also additional tougher domestic policies and measures such as emissions capping, R&D incentives, and education for energy conservation in addition to a pricing and tax policy.