Dandelion-Like Bi2S3/rGO hierarchical microspheres as high-performance anodes for potassium-ion and half/full sodium-ion batteries

Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) have been considered as attractive alternatives for next-generation battery systems, which have promising application potential due to their earth abundance of potassium and sodium, high capacity and suitable working potential, however, the design and application of bi-functional high-performance anode still remain a great challenge up to date. Bismuth sulfide is suitable as anode owing to its unique laminar structure with relatively large interlayer distance to accommodate larger radius ions, high theoretical capacity and high volumetric capacity etc. In this study, dandelion-like Bi₂S₃/rGO hierarchical microspheres as anode material for PIBs displayed reversible capacity, and 206.91 mAh·g⁻¹ could be remained after 1,200 cycles at a current density of 100 mA·g⁻¹. When applied as anode materials for SIBs, 300 mAh·g⁻¹ could be retained after 300 cycles at 2 A·g⁻¹ and its initial Coulombic efficiency is as high as 97.43%. Even at high current density of 10 A·g⁻¹, 120.3 mAh·g⁻¹ could be preserved after 3,400 cycles. The Na₃V₂(PO₄)₃@rGO//Bi₂S₃/rGO sodium ion full cells were successfully assembled which displays stable performance after 60 cycles at 100 mA·g⁻¹. The above results demonstrate that Bi₂S₃/rGO has application potential as high performance bi-functional anode for PIBs and SIBs.

     

Prevalence,enumeration, and characterization of Salmonella isolated from aquatic food products from retail markets in China

This study aimed to estimate the extent and level of Salmonella contamination of aquatic food products in China, and to determine serotype, virulotype, and the antimicrobial resistance profiles of recovered Salmonella isolates. Out of 554 samples collected from July 2011 to May 2014, 86 (15.5%) tested positive for Salmonella. The highest contamination rate occurred in oysters (23.1%, 6/26), followed by freshwater fish (18.6%, 43/231), shrimp (13.0%, 13/100), and saltwater fish (12.2%, 24/197). The contamination levels generally corresponded to a most probable number (MPN)/g of 0.3–10, although one sample exceeded 110 MPN/g. Among the 103 isolates, S. Typhimurium, S. Wandsworth, S. Thompson, and S. Derby were the most prevalent serovars. Sixty-eight isolates (66.0%) were resistant to at least one antimicrobial, and 35 (34.0%) were resistant to more than three. High rates of resistance were observed for tetracycline (35.9%), ampicillin (28.2%), nalidixic acid (26.2%), trimethoprim-sulfamethoxazole (25.2%), chloramphenicol (20.4%) and streptomycin (18.4%). Of note, S. Thompson isolates exhibited resistance to multiple extended-spectrum cephalosporins, ciprofloxacin, and other antimicrobials. PCR analysis of 15 virulence genes showed that ssaQ, mgtC, siiD, sopB, and bcfC were present in all 103 isolates, whereas the remaining loci were variably distributed. S. Typhimurium, S. Enteritidis, and S. Weltevreden isolates exhibited a wider range of pathogenicity determinants compared with the other strains. Our study provides a comprehensive surveillance on prevalence of Salmonella in aquatic food products from China and indicates its potential risk to public health. These data are valuable for epidemiological studies, risk management, and public health strategies.     

Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

质量控制图系统的实现及在SMT中的应用

本文将控制图理论与计算机技术相结合,开发了质量控制图系统.介绍了该系统的设计方案和关键技术问题,并以电子产品制造中监控SMT机的焊膏厚度为例说明了系统的应用.     

两种基于弯曲损耗的光纤测试仪器原理及应用

光纤通信技术的飞速发展带动了光纤测试仪器的发展。主要对两种利用弯曲损耗对光纤进行检测的仪器——光纤识别仪、光纤对线器的原理、结构及其在光纤通信工程中的应用进行了阐述，两种仪器可以在不中断光纤通信的情况下对光纤进行检测，极大地降低了对光纤通信系统的影响，对光纤通信系统具有重要意义。     

Level set and geodesic active contours based measurement of material removal between serial sections

The measurement of the thickness of material removed between serial sections is a crucial step of three-dimension reconstruction. Geodesic active contours is an efficient method for contour detection of objects on an image. The indents on the SiC/Al composite micrographs are segmented by using level set and geodesic active contours. After getting the contours of the indents, we calculate the distance from the uppermost pixel to the lowermost pixel to get the vertical diagonal length, and calculate the distance from the leftmost pixel to the rightmost pixel to get the horizontal diagonal length of each contour. Then the final length of each diagonal is acquired by averaging the vertical diagonal length and the horizontal diagonal length, respectively. The Vickers’ indenter is made by a square pyramidal-shaped diamond with opposite faces at an angle of 136°, so the thickness of material removed between two serial sections and the length difference of the diagonals on the two serial sections has a definite geometrical relation. Thus the thickness of material removed between two serial sections is acquired using the geometrical relation.     

基于湿度扩散理论的混凝土早期收缩分析

混凝土早期收缩开裂是加剧混凝土劣化并导致最终失效的一个重要因素．分析混凝土早期的自由收缩量值是进行收缩开裂研究的基础。为此，基于湿度扩散理论建立了混凝士早期的自生收缩与干燥收缩计算分析模型，经实例验证，计算结果与试验结果有较好的一致性。     

热镀钢丝膜层的冷凝计算

分析了热镀钢丝自液池引出过程中的热传导，得出了温度分布的解析解，从而计算钢丝表面膜层达到凝固温度时的提抽高度，为结构设计及确定冷却装置的合理位置提供依据。