Strength and chemical resistance of mortars containing brick manufacturing clays subjected to different treatments

This paper presents the results of an investigation of the properties of mortar in which a calcined clay was employed as a pozzolan. Mortars were prepared using either heat treated clay or ground waste clay bricks (from the same clay subjected to 1000 °C calcining) as a pozzolanic partial replacement for cement at replacement levels of 10%, 20% and 30%. The compressive strengths of the mortars were monitored up to 90 days and the resistance to sodium sulphate solution and synthetic seawater was monitored up to 300 days. The specimens were also monitored for weight changes. Partially replacing cement by ground brick or heat-treated brick clay gives early strengths that are lower than that of the control. At 90 days, however, the strengths are the same as or are greater than that of the control. Heat-treated clay is effective in reducing expansion during exposure of the mortar to sulphate solution and synthetic seawater. The rapidly cooled clay gives better performance, in terms of strength development and resistance to harmful solutions, than the slow cooled clay.     

基于极限学习机的堤防工程多元风险指标评价方法

为提高堤防工程风险评价的准确性,提出了基于极限学习机的堤防工程多元风险指标评价方法。首先,综合考虑影响堤防风险的28个评价指标,利用层次分析法从预警系统、堤防工程系统、环境系统和社会经济系统这4个方面建立了堤防工程多元风险评价指标体系。接着,基于极限学习机算法对28个指标进行标准化处理及分级标准构建,以风险指标作为输入量,分级隶属度作为输出量,划分风险等级,量化评价指标,估计多元风险评价指标值和判断风险的严重程度。最后,依托鄱阳湖重点堤防——康山大堤,构建多元风险评价指标体系,运用极限学习机算法计算多元风险评价指标值。评价结果表明:康山大堤目前处于基本安全水平,符合康山大堤经过两次加固后的工程实际情况,并与其他方法进行对比,验证了提出方法的可靠性和有效性。该方法可拓展应用到其他重要水工结构工程风险评估中。     

Crystallographic structure- and texture-dependent fracture behavior of polycrystalline lead zirconate titanate ceramics

Journal of Electroceramics - The effect of crystallographic structure and texture on the fracture behavior of lead zirconate titanate (PZT) ceramics was investigated. PZT ceramics with Zr/Ti ratio...     

支持向量机及其在径流预测中的应用

给出了支持向量机方法(SVM)的思路、特点及关键之处,探讨了SVM在径流预测中的可能性,并与基于遗传算法的门限回归模型(TR) 进行了对比分析。径流预测实例分析表明,在拟合阶段,SVM模型要好于TR模型;在预留检验阶段,SVM模型与TR模型接近。同时SVM模型适合于小样本情况且能达到全局最优。SVM模型用于径流预测是可行的、优越的。     

基于TOPSIS-模糊综合评判的模糊推理模型在开河预报中的应用

冰凌开封河受到较多自然和人为因素的影响,具有较高的不确定性,为了进一步提高冰凌开封河预测的精度,考虑各因素的综合作用成为解决问题的关键。先采用主成分分析法初步确定冰凌开封河历时影响因子的权重,运用模糊推理模型依据影响因子矩阵的相似性进行初步预测,进而采用TOPSIS-模糊综合评判模型对预报因子进行识别,筛选出合理的预报因子进行二次预测。运用实例对基于TOPSIS-模糊综合评判模型冰凌预报因子识别的模糊推理模型的效果进行了检验,同时与冰凌预报模糊优选神经网络BP模型进行对比,结果表明:在TOPSIS-模糊综合评判模型因子进行识别基础上的模糊推理模型预测精度较高、效果较好,既能够有效识别预报因子,又能够较好地提高预报封河、开河历时的精度,为凌汛预测提供了新的途径。     

利用十字板强度推算软土抗剪强度指标方法的探讨

软土结构性强,灵敏度高,常规室内试验测得强度参数偏小,而十字板剪切试验对土体扰动小,测定结果较为准确,但是十字板剪切试验无法直接得到土体的c,φ值,需要使用一定的方法进行转换。该文结合某一工程案例,探讨了目前常用的几种根据十字板剪切试验推算软土抗剪强度指标的方法,发现几种方法对于软土内摩擦角φ的推算均能达到较好的效果,但是粘聚力c偏大。最后,提出一种基于地基承载力公式修正c值的方法,对规范方法进行粘聚力修正,结果较为合理。     

挡水结构水下爆炸作用的离心模型试验

水下爆炸包括冲击波和气泡脉动,两者能量相当,均会对结构产生毁伤作用。水下爆炸载荷试验唯有在离心机内才满足相似关系,设计试验时宜在离心机负载范围内尽可能增加模型尺寸以减小边界效应。针对挡水结构,在离心机内布置压力传感器、高速摄像机、加速度计及应变片测试了冲击波、气泡脉动载荷及结构产生的动力响应。通过试验对比了水下爆炸和空爆产生的载荷,分析其引起结构动力响应的差异。对于水下爆炸,重力加速度的增加引起气泡脉动冲量的减小,而气泡脉动产生的峰值应变基本与气泡冲量呈线性关系,因而模拟气泡脉动对结构作用时应考虑重力效应。     

曝气生物滤池处理农村生活污水效率与微生物群落分析

以北京大兴区农村生活污水为处理对象,设计了4个反应柱,研究了3种填料结构、2种气水比条件下曝气生物滤池(BAF)对农村生活污水处理效率及微生物群落的影响。结果表明:(1)1~#、2~#、3~#柱气水比相同、填料结构不同,BOD5、CODCr和氨氮的去除率达到84.51%~96.49%;4~#柱与2~#柱填料结构相同,但气水比小,BOD5和CODcr处理效果差;4个柱TP的去除率低,需要强化除磷。(2)1~#、2~#、3~#柱OTU数量差异很小,说明微生物种类数量基本相同;2~#柱特有OTU数远大于4~#柱,说明填料结构相同条件下较大气水比有利于增加微生物种类。(3)1~#、2~#、3~#柱优势菌群主要有6种,在不同高度的优势菌群种类基本相同,但数量上有所差异;仅变形菌门中可能含有聚磷菌,这也是除磷效果差的原因之一。     

Study on early warning index of spatial deformation for high concrete dam

Owing to the deficiency in early warning for high concrete dam,a formula was established to characterize the deformation behavior of high concrete dam as a whole.The early warning index of spatial deformation was calculated by low probability principle on the basis of the deformation entropy formula proposed.The steps were as follows.Firstly,the probability method was utilized to define the degree of order and degree of chaos for each survey point.Secondly,the weight distribution among the survey points was...