熔体的粘度，亚稳相，相变和相图——Ⅲ．合金液相相图

对Sn（x）Bi（1-x）11种组分（x=0.10％，20％…80％，90％，100％）的熔体的粘度进行了测量，给出了它们的相变点Tt，相区和相参数；根据这些参数作出了一个二元合金液相相图；为了表明相区的划分和每个相区的结构特征提出两种相图的形式；第1，温度一组分（T-X）图，第2，结构-组分（df-x）图。     

600MW机组热力系统优化设计探讨

在保证机组运行安全、可靠的前提下，对热力系统进行了优化，合理地减少了备用设备和备用容量，降低系统阻力及工质损失。从而达到了降低能耗和初投资，减少运行成本的目的。     

基于面积流测量原理的一种新型流量测量装置

流量测量装置在自动化系统中应用非常广泛,在热力发电厂中流体的流量直接反映负荷高低、工作状况和运行效率。基于不同测量原理的装置其应用场合也不尽一样,在风量控制领域近几年也出现了十几种形式各异的产品,各种产品都有其自身的优缺点。分析了各种装置的原理及优缺点,重点介绍了一种新型的基于面积流测量原理的测量装置。     

Design of ACO based PID controller for zeta converter using reduced order methodology

DC-DC conversion playing major role in many applications of power electronics and widely used in power circuit. Enormous methodology's of PID based converters are created in recent decades. The zeta converter is basically a DC – DC converter and its control the output voltage from an input voltage step up and step down the output voltage. The main scope of this paper is to design of ACO(Ant colony Optimization)based PID controller for zeta converter using model order technique with minimum of error, the zeta converter is basically fourth order system, design of PID controller for fourth order system is quite complex so model order reduction is used for controller design of zeta Converter, Therefore, the higher order system is reduced to second order using three different reduction techniques, then the ACO based PID controller is designed for reduced order system and is matched with the zeta converter, the results shows that designed controller for zeta converter gives quite good response for both the transfer function and is attached with zeta converter circuit, controller gives good performance indices is made on the basis of ISE, IAE and ITAE with minimum value of errors.     

Simulation of football based on PID controller and BP neural network

Wheel robot soccer speed control system using a ball object detection method and PID controller. A control system is based on the object detection system's behavior based on the robot position's orientation to the target position. PIDs are instruments, pressure, speed, and other operational factors used in control, temperature adjustment flow, and industrial control applications. The PID controller uses control loop feedback dynamics to control functional variables and is the most accurate and stable controller. The robot position is held by placing the ball vertically. When the robot's work is perpendicular to the ball, the robot moves with a certain speed controlled by the PIT controller based on the robot's distance and the ball. Standard conditions (standard ball) test results show that the robot can detect the ball material while in the vertical position, whether on the robot's right or left. In the random test that changes direction, the robot can move more dynamically as the ball's change in place.     

高功率锂离子电池研究进展

高功率快放型锂离子电池是目前锂离子电池领域研究的重点方向之一。为了获得具有高功率密度的锂离子电池,正极材料须具有较高的电压和较高的电子与离子导电率,正极材料主要包括高电压钴酸锂、镍锰酸锂和高电压三元材料,负极材料包括碳系材料、钛基材料和金属氧化物材料,以及为提高首效和降低负极电位而采用的预嵌锂方法,并对锂离子电池电解液用锂盐、溶剂和添加剂进行了综述。最终总结了功率密度测试方法,并对高功率锂离子电池的研究进行展望。      

微生物发酵生产2,3-丁二酮的研究

2,3-丁二酮又称双乙酰,是一种黄色至浅绿色具有强烈奶油香味的重要香料。2,3-丁二酮传统上用合成法生产,我们以农副产品为主要原料,利用选育的高产菌株发酵生产,发酵工艺条件温和,产品风味自然、逼真、安全性高,视同天然产品,符合人们崇尚自然的趋势,可广泛用于食品、日化、饲料香精的生产。     

使用不同材质冲压模具的生产成本分析比较方法

硬质合金模具在冲压生产中的应用越来越多,由于目前缺少相关的经济性分析方法,因此在选择时存在很大的盲目性。通过对冲压生产过程进行综合分析,推导出计算生产冲压件成本的基本方法,并编写出相应算法。用这种算法可以分别计算出使用钢制模具和硬质合金模具的冲压件成本,然后根据成本曲线找出经济临界点,对于指导模具选择和降低冲压件成本具有重要的意义。     

潜孔锤偏心跟管钻进在高压喷射灌浆中的应用

由冲积堆积的含漂砂卵砾石层和冲洪堆积含漂卵砾石夹砂土层组成的地层,是钻探工程中常见的一种典型的难钻进不稳定地层.文章介绍了通过采用潜孔锤偏心钻头跟管钻进法,克服了砂卵石成孔难点,加快了施工进度,保证了工程质量.