基于MATLAB/Simulink的交流伺服系统的仿真

交流伺服系统是一种复杂的非线性时变系统。文中介绍了应用MATLAB/SIMULINK可视化动态仿真平台进行软件伺服的系统仿真方法。该方法采用易扩展的模块化设计,可在线修改和观察所有参数以及参数变化对系统控制效果的影响,从而能方便地验证各种控制策略,并据此选出高效的快速设计方案,缩短了研制周期,对系统设计和调试起到了很大的作用。     

基于FPGA+POWERPC(VIRTEX-II PRO)的雷达数字伺服控制系统

VIRTEX IIPRO是美国Xilinx公司最新一代的FPGA产品,内嵌了IBM的POWERPC405,它的功能十分强大、扩展性能优越,在工业和军用设备中有着很好的应用前景。本文对该芯片的特点进行了简单介绍,并介绍了一种基于FPGA+PPC为核心的雷达数字伺服控制系统。     

基于嵌入式以太网的异步电机矢量控制系统体系结构设计

为了实现异步电机现场控制与上层管理的无缝集成，提出在通用变频器一异步电动机调速系统的基础上，采用基于ARM7TDMI核的微控制器和以太网控制芯片，实现异步电机的网络化控制。详细介绍了该系统的体系结构设计方案。     

电机系统综合应用实验教学的研究

分析了目前电机实验教学的现状，指出电机实验教学存在的问题，针对自动化类专业学生掌握电机及其综合应用实验的教学内容，提高应用电机的能力和基本素质等方面进行了研究。     

随动系统数字化改装中PWM系统的研究

描述了一个随动系统数字化改装中 PWM系统的研究 ,并给出了计算机辅助分析的程序流程图 ,为类似装备的数字化改造提供了有效的参考     

三相异步电动机可靠性和经济分析

根据三相异步电动机的主要失效模型,利用概率分析和补充变量方法,求得了三相异步电动机的可靠性指标和运行的经济指标。     

同步电动机改型设计

对同步电动机从400V改为6000V过程中的几个问题通过实例进行分析说明,可供同步电机的改型设计参考。     

The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

神经网络离散变结构控制的算法及其应用

本文首次将自适应线性神经元（Ａｄａｌｉｎｅ）用于离散变结构控制。以滑模面Ｓ（ｋ）＝０作为Ａｄａｌｉｎｅ元的希望输出，作为Ａｄａｌｉｎｅ元的实际输出，通过ＬＭＳ算法在线调整权值可保证滑态可达条件的满足。应用所提出的控制策略对泵控马达速度伺服系统进行控制，仿真表明控制效果是令人满意的。     

交流探尺的控制及其在武钢新3^#高炉上的应用

本文论述了交流探尺的控制原理及到料面信号的检测方法。以其在武钢新３＃高炉上的应用为例，给出系统组态、控制框图及它在无料钟系统中所起的补偿倾动角度的作用。最后对交流、直流探尺系统进行了比较。