数字式液压流量阀在工程机械中的应用

数字式流量阀是一种新研制开发的数字控制式流量阀，其调速控制响应快、精度高、稳定性好，应用于工程机械液压系统，可使工程机械的操纵控制系统面临新的变革。     

Geochemical characteristics of the Yufuin outflow plume, Beppu hydrothermal system, Japan

Thermal water at Yufuin (Kyushu Island, Japan) is tapped through about 820 shallow wells and used mainly for hot-spring bathing purposes. Chemical and isotopic data for fluids from wells and fumaroles in Yufuin and Beppu indicate that the thermal activity at Yufuin represents a dilute, westward-flowing hydrothermal outflow plume from the Beppu hydrothermal system. Two other (eastward-flowing) outflow plumes have long been recognized at Beppu, but the Yufuin outflow plume is first recognized here. The Yufuin outflow plume is apparently a mixture of two end-member fluids: (1) deep high-temperature (250–300°C) fluid from the Beppu system having high chloride concentration (1400–1600 mg/L) and a δ¹⁸O value near −6.0%, and (2) meteoric water having low chloride concentration (≤7 mg/L) and a δ¹⁸O value near −9.2%.A permeable conduit for the vertical and lateral transport of deep fluid from the Beppu system is provided by the Yufuin Fault zone, which extends westward from the southern flank of Mt. Tsurumi volcano to the town of Yufuin. Stable isotope ratios and chloride concentrations for shallow groundwaters near the eastern end of the fault, at an elevation near 700 m, are consistent with those required for the low-chloride meteoric end-member of the Yufuin thermal waters. Recharge of this meteoric water, as well as mixing with the Beppu deep fluid, may occur along the Yufuin Fault. Enthalpy-chloride relations indicate additional conductive heating of the Yufuin waters, in the amount of 350–500 kJ/kg beyond that which can be accounted for by mixing between Beppu deep fluid and meteoric water. This could be a result of conductive heating with convection to a depth of 1–2 km. Estimates of the magnitude of the heat source for the Beppu hydrothermal system should take into account the heat being discharged at Yufuin.     

C2 用于声化学研究的大功率超声系统的研制

根据声化学反应的特殊要求，我们研制了上前用于声化学研究的大功率超声系统，由参数可调节的超声发生器配合不同频率的换能器工作，并用它组合成杯式幅杆结构声化学反应器，解决了有关声化学设备的一些技术问题。为声化学技术从实验室规模向工业应用过渡做了必要的准备。     

A comparative thermodynamic study of sorption systems: second law analysis

As a consequence of the phasing out of CFCs, sorption systems appear to be potential candidates to replace vapour compression systems. Amongst sorption systems there exists a choice between several systems, such as liquid absorption, solid adsorption and chemical reaction heat pumps. Nevertheless, few comparative studies between these systems have been undertaken so far. It is the aim of this paper to present such a study based on combined first and second law thermodynamical analysis of the different cycles. Simple entropy generation processes explain why the basic cycles for these systems yield performances much lower than the Carnot efficiency. The possibility of operating regenerative cycles with internal heat recovery and higher efficiencies has also been considered for typical common base conditions. Different entropy generation considerations have been visualised, such as thermal coupling (external/internal), non-uniform temperature component entropy production and other irreversible processes for the COP degradation in these systems. It is found that thermal coupling irreversibilities in solid sorption systems and other internal irreversibilities in liquid sorption systems with solution heat exchanger are dominant in the actual COP degradation with respect to the reversible Carnot COP.     

秦山核电厂核空气净化系统试验与运行

本文介绍了秦山核电厂核空气净化系统的设置,系统功能及运行方式,净化部件的性能参数。文章着重叙述安装工作完成后所进行的现场试验的项目、目的、方法和评价标准。已完成的现场试验证实,秦山核电站核空气净化系统将是可靠高效率的,文章最后介绍了运行管理的要点,指出强化运行管理是核空气净化系统能否发挥预定功能的关键。目前,秦山核电站正向满功率进军,核空气净化系统运行正常,满足了秦山核电厂安全运行的要求。     

微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。     

行波管质量与可靠性信息管理系统的设计

本文从应用角度简要介绍了《行波管质量与可靠性信息管理系统》的研制背景，数据库的数据来源，数据结构，系统构成及功能特点。     

高分辨率显示屏特性分析用光学透镜设计

描述了高分率显示屏特性分析用的光学透镜的特点和设计要求。分析了调焦镜头和镜头位置调节两种结构的优缺点，推导了屏厚变化（即物距变化）对测量精度影响的表达式。给出了设计实例。实验测量结果与理论分析基本上一致。     

噪声测量作为筛选光电耦合器件的一种方法

本文针对目前用于光电耦合器件筛选方法的不足，提出了用测量耦合器件噪声功率谱的方法来筛选掉噪声值大的器件，给出一批光电耦合器件的测量统计结果及在不同工作点时的噪声功率谱，并给出相应的筛选标准，实验结果表明，这种方法是有效、可行的。     

A protocol for performance evaluation of line detection algorithms

Accurate and efficient vectorization of line drawings is essential for any higher level processing in document analysis and recognition systems. In spite of the prevalence of vectorization and line detection methods, no standard for their performance evaluation protocol exists. We propose a protocol for evaluating both straight and circular line extraction to help compare, select, improve, and even design line detection algorithms to be incorporated into line drawing recognition and understanding systems. The protocol involves both positive and negative sets of indices, at pixel and vector levels. Time efficiency is also included in the protocol. The protocol may be extended to handle lines of any shape as well as other classes of graphic objects.