多种采暖方式的特点及其选择

介绍了多种采暖方式．并对各种采暖的适用性、一次性投资、运行费用和对环境的影响作了对比，提出了选择的优先顺序，为房地产开发商和用户对于采暖方式的选择提供了参考。     

A demonstrative study for the wind and solar hybrid power system

In March 1995, a small scale wind and solar hybrid power system was installed at Ashikaga Institute of Technology. Until now, the authors have acquired the data of the output of the hybrid power plant along with wind speed, wind direction, and the solar radiation, in order to demonstrate a complementary relationship between solar energy and wind energy.After nine months operation of the system, the authors confirmed that there exists a complementary relationship between solar energy and wind energy. We also found, however, that the power output by wind does not have much prospect compared to that by solar cell especially in summer season in Ashikaga area.     

A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition

Waste combustion is an interesting alternative for waste management and energy recovery. Knowledge of the waste higher heating value (HHV) is important for judging it’s worth as fuel. This work introduces a new equation, based on thermochemical concepts, to calculate HHV from elemental composition. This equation is expressed in terms of mass percentages on a dry basis of carbon (%C), hydrogen (%H), oxygen (%O), nitrogen (%N), and sulfur (%S); the HHV is computed in MJ/kg. The equation is as follows: HHV=(1−(%H₂O/100))(−0.3708(%C)−1.1124(%H)+0.1391(%O)−0.3178(%N)−0.1391(%S)). The thermochemical concept on which this expression is based involves a wide applicability. This equation neglects the inorganic carbon, hence it is not very adequate when there is a significant concentration of it. The predictions from this approach were contrasted against those proceeding from equations currently used in combustion technology, and also against bomb calorimeter data. The new equation is clearly competitive with respect to other formulations, and it can be very helpful for presenting a waste HHV value based on different derivation suppositions.     

红外加热节能技术的现状与发展前景

本文综述了国内外节能的现状与发展趋势,论述了远红外电加热领域的发展前景,强调了加强基础理论研究的重要性,介绍了我国红外加热应用的领域和国外新开发的红外产品。     

硫化钠在黑白钨加温精选中的应用研究

介绍了柿竹园黑白钨混合粗精矿加温精选中 ,添加硫化钠与水玻璃混合剂比单一添加水玻璃能更有效地使白钨矿与萤石等含钙矿物及脉石矿物分离。论述了硫化钠在加温精选中的作用效果并探讨了其作用机理     

RF antenna analysis with the ICANT code

The ICANT code computes self-consistently the surface current distribution on a 3D antenna model radiating in a plasma or vacuum and has been used to analyze the coupling properties of various antenna models. In this work it is used to assess near-fields generated by different versions of the TCABR (Tokamak Chauffage Alfvén wave heating experiment in Brazil) antenna as well as coupling properties of the TEXTOR tokamak in Forshungszentrum Jülich. Two different strap models planned for the TCABR antenna are shown to be practically equivalent in terms of maximum electric field. Textor coupling calculations are close to experimental values.     

砂岩储集层微波加热产生微裂缝的机理及意义

微波加热无需介质传热,具有升温速度快、热惯性小、选择性加热、穿透力强、过程易于控制等优点,已被试验性地应用于石油开采中。但有关微波加热对储集层岩石微观结构影响的研究还很缺乏,限制了该项技术在油气开采领域的广泛应用。通过实验手段研究了微波加热前后砂岩岩样微观结构变化、微裂缝产生机理及特征。结果表明,砂岩在微波加热过程中容易产生微裂缝,且不同岩石的微波加热致裂机理不尽相同,主要包括:矿物失水收缩、颗粒粒间开裂和颗粒内部开裂,低渗透致密砂岩刚性颗粒的粒内开裂作用显著。微波加热产生的微裂缝具非定向特征,即使在应力的作用下有一部分裂缝会发生闭合,但仍有大量微裂缝可以起到增加渗透率的作用。井下微波加热的致裂作用有助于改善近井区域渗流能力,提高低渗透油气藏的开采效率。图4参15     

体积-表面淬火中加热温度的自动控制

根据表面-体积淬火奥氏体规范的要求，分析了感应加热过程中温度控制的特点和方式，并介绍了采用红外线光导纤维测温和微机控温技术成功用于体积-表面淬火中透热温度的自动控制。     

Effect of heating-rate on failure temperature of pre-loaded brass H62

The response and failure of brass H62 specimens subjected to different levels of pre-loaded stresses and heating rates were investigated using a Gleeble-1500 thermal-mechanical material testing system. The metallographs of the tested material were also observed and analyzed. It is found that the increase of either pre-loaded stress or heating-rate decreases the failure temperature. Metallographic analysis shows that high heating-rate may cause stronger local thermal inconsistency （LTI） and remarkably increase the microdefects in the material, which may markedly degrade the macroscopic mechanical properties of the material.     

From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.