电容器介质吸收电流的测量和表征

在外电场作用下，电容器介质的吸收电流和漏电电流混杂而难以分开，但外电场除去后吸收电流对电容器放电总电荷所贡献的百分比具有确定值，吸收电流的释放遵从自由弛豫规律。可用响应时间ｒ’表征。实验给出了一些常见介质的吸收电流表征参数。     

ZST微波陶瓷在介质振荡器上的应用研究

用传统固相法制备ZST(氧化锆-氧化锡-氧化钛)系微波陶瓷,研究了ZST系微波陶瓷的组成对介电性能的影响。通过X-射线衍射(XRD)和HP8714ET网络分析仪对其晶体结构和微波介电性能进行研究,实验结果表明:少量掺Bi2O3的ZST系陶瓷材料可把烧结温度降低至1 260℃,微波介电性能较好;掺入量大于2%(质量分数)时,ZST系微波陶瓷在晶界偏析形成了Bi2Ti2O7新相,微波性能下降。用微波介电性能较好的ZST系陶瓷制成的介质振荡器进行测试,其电性能满足设计要求。     

Dielectric behaviour of glasses and glass ceramics in the system BaO-PbO-TiO2-B2O3-SiO2

Glasses with varying molar ratios of PbO/BaO in the system BaO-PbO-TiO₂-B₂O₃-SiO₂ were prepared keeping (BaO + PbO)/TiO₂ ratio equal to one. The glasses were ceramized by two-stage heat treatment. X-ray diffraction indicates that PbTiO₃ crystallizes in lead-rich glasses while BaTiO₃ precipitates in barium-rich compositions. Solid solution (Ba, Pb)TiO₃ does not seem to crystallize over the entire range of compositions. Simultaneous presence of PbO and BaO in the initial glass composition reduces the yield of ferroelectric phase. Dielectric properties have been interpreted in terms of microstructural features.     

动态力学及介电法研究蓖麻油丙烯酸酯共聚网络悬挂链的弛豫运动

用动态力学（内耗）和介电方法研究了由蓖麻油（ｃａｓｔｏｒｏｉｌ）、甲苯二异氰酸酯（ＴＤＩ）、丙烯酸羟乙酯（ＨＥＭＡ）组成的网络（Ａｉ）和由正己醇取代Ａ网络中部分ＨＥＭＡ组成的网络Ｂｉ（ｉ＝０，１，２，３）两种网络的内耗及介电损耗，内耗峰强度随悬挂链数目增加而升高，证实了网络破坏后形成的悬挂链的运动对内耗及介电损耗峰高有明显的贡献。     

Synthesis and microwave characterization of Co-SiC core-shell powders by electroless plating

Co-SiC core-shell powders were prepared by electroless plating. Scanning electron microscopy （SEM） revealed that Co-SiC core-shell powders were of nearly sphere-like shape and were about 0.3 pan. X-ray powder diffraction （XRD） patterns showed that the cobalt powder was hexagonal crystallite. The complex dielectric constant and the complex permeability of Co-SiC core-shell powders-paraffin wax composite were measured by the rectangle wavegnide method. It showed that the dielectric loss was less than 0.1 and the magnetic loss was about 0.2 in 8.2-12.4 GHz for prepared Co-SiC core-shell comoosite oowders.     

面向配电网不停电作业装置的高性能电力电容器介质材料制备

随着配电网高可靠性作业的发展,不停电作业装置是配电网运检的必备工具之一。电力电容器是配电网不停电作业装置中配电单元、AC/DC电源变换单元等的能源储存核心单元,其高性能化、轻型化和小型化是其发展的一个关键。为制备新型高储能密度的电力电容器用介质材料,利用磁控溅射技术在Pt/Ti/SiO2/Si基底上制备Ba(Sn0.3Ti0.7)O3(BTS)薄膜,研究了不同衬底温度下BTS薄膜的结晶状况和表面形貌,对不同衬底温度条件下BTS薄膜的介电常数、击穿场强和储能密度进行分析,建立了微结构和储能性能之间的联系。研究表明:在650℃下制备的BTS薄膜具有特有的结晶状况、最大的介电常数、最高的击穿场强和储能密度。其储能密度达到19.0 J/cm3左右,是目前商用聚丙烯储能薄膜的6倍。     

Review of recent advances of polymer based dielectrics for high-energy storage in electronic power devices from the perspective of target applications

Polymer-based dielectric capacitors are widely-used energy storage devices.However,although the functions of dielectrics in applications like high-voltage direct current transmission projects,distributed energy systems,high-power pulse systems and new energy electric vehicles are similar,their requirements can be quite different.Low electric loss is a critical prerequisite for capacitors for electric grids,while high-temperature stability is an essential pre-requirement for those in electric vehicles.This paper reviews recent advances in this area,and categorizes dielectrics in terms of their foremost properties related to their target applications.Requirements for polymer-based dielectrics in various power electronic equipment are emphasized,including high energy storage density,low dissipation,high working temperature and fast-response time.This paper considers innovations including chemical structure modification,composite fabrication and structure re-design,and the enhancements to material performances achieved.The advantages and limitations of these methods are also discussed.     

基于漂移扩散模型方程的IGCT电路模型

现有基于双极扩散方程(ADE)的功率半导体器件模型只能准确描述准中性区载流子分布,应用于高压器件建模时精度有限。提出一种基于漂移扩散模型(DDM)的集成门极换流晶闸管(IGCT)电路模型的建模方法以提高模型精度。通过分析发现,求解变量数量级相差较大,以及由高掺杂浓度决定的特征参数是影响模型特性的主要因素。由此,通过边界高掺杂区域的解析建模、简化基区求解的边界条件以及应用移动网格法求解DDM提高了模型的稳定性和计算速度。最后,IGCT双脉冲测试仿真与实验对比结果表明在仿真耗时接近的前提下,该方法相对于现有基于ADE模型可以更好地仿真器件在关断振荡以及穿通时的特性。     

碱性阻挡层抛光液中ULK介质抛光性能的研究

研究了化学机械抛光(CMP)过程中抛光液的SiO₂磨料质量分数和表面活性剂对多孔SiOCH薄膜(ULK介质)介电常数(k)及抛光速率的影响。所用抛光液(pH=10)主要由0%~4%(质量分数,下同)SiO₂、0.075%H₂O₂、1%邻苯二甲酸氢钾和不同质量浓度的表面活性剂组成,其中表面活性剂为非离子表面活性剂脂肪醇聚氧乙烯醚(AEO-9和AEO-15)、阴离子表面活性剂十二烷基硫酸铵(ADS)和两亲性非离子表面活性剂辛基苯酚聚氧乙烯醚(OP-50)。结果表明,磨料质量分数的增大会使ULK介质的去除速率和k值都增大。聚醚类表面活性剂都能在CMP过程中很好地保护ULK介质表面,降低其去除速率,OP-50的效果尤其好。当采用2%SiO₂+0.075%H₂O₂+1%KHP+200 mg/L OP-50的抛光液进行CMP时,ULK介质的去除速率为5.2 nm/min,k值增幅低于2%,Cu和Co的去除速率基本不变。     

Low Dielectric Polyimide/Fluorinated Ethylene Propylene (PI/FEP) Nanocomposite Film for High-Frequency Flexible Circuit Board Application

The low dielectric polymer films have drawn great attention to the application as the dielectric insulating materials in high-frequency circuit boards, while the weak adhesion to the copper foils and the poor processability resulted from the fluorinated or rigid structures limited their high-frequency application. In this work, the low dielectric and high adhesive polyimide/fluorinated ethylene propylene (PI/FEP) nanocomposite film for high-frequency flexible circuit board application is developed. It is indicated that the fluorocarbon surfactants can significantly improve the dispersion of FEP in PI substrate, and thus, the PI/FEP nanocomposite film exhibits excellent mechanical properties, including the tensile strength increases to 46.6 MPa and the elongation at the break increases to 13.7%. Importantly, at the high-frequency of 10 GHz, the 60 wt% FEP filled PI nanocomposite film displays an ultralow dielectric loss (0.006) and a reduced dielectric constant (2.69). In addition, the high-frequency flexible circuit board with the PI/FEP film as the dielectric insulating layer has a high peel strength of 0.75 N mm⁻¹, indicating this PI/FEP nanocomposite film can meet the requirements of the high-frequency flexible circuit board application.