低频电磁水平半连续铸造中磁场的分布及其对宏观偏析的影响

采用数值模拟的方法研究了低频电磁水平半连续铸造7075铝合金中不同强度及频率的磁场在熔体中的分布,并采用试验的方法研究了不同条件的磁场对铸锭宏观偏析的影响.将使用传统水平半连续铸造生产出的铸锭与低频电磁水平半连续铸造生产的铸锭进行了比较.研究结果表明:在传统水平半连续铸造工艺条件下,铸锭中易出现较严重的负偏析及重力偏析;然而,在低频电磁水平半连续铸造过程中,低频电磁场的存在明显削弱了铸锭中的宏观偏析.此外,磁场在熔体中的分布情况将直接影响其作用效果,提高磁场强度及适当降低磁场频率均有利于对宏观偏析的改善.     

Numerical simulation of gas metal arc welding temperature field

The infrared camera is used to investigate the temperature field of gas metal arc welding.The results show that the temperature distribution of weld pool and adjacent area appears cone shape.A new heat source model combined by Gaussian distribution heat source of the arc and conical distribution heat source of the droplet is set up based on the experimental results, and with the combined boundary conditions,the temperature field of gas metal arc welding is simulated using finite element method.According to the comparison between the results of experiment and simulation in temperature field shows that the new combined heat source model is more accurate and effective than the Gauss heat source model.     

棒材无模拉伸温度场及温度梯度

采用有限元法对棒材无模拉伸温度场进行了研究,利用有限元分析软件对变形区温度场进行了数值模拟,分析了温度场及温度梯度的影响因素及影响规律,确定了变形区温度梯度分布规律。拉伸件轴向温度梯度dT/dz与其轴向坐标z之间呈线性关系,这就使得轴向各断面的平均变形抗力分布均匀,从而保证拉伸过程稳定进行。     

基于三维有限元动态模拟圆柱形表面腐蚀缺陷漏磁场

根据电磁场有限元分析的基础理论，对储罐底板圆柱形表面腐蚀缺陷，应用ANSYS三维有限元静态分析了圆柱形表面腐蚀缺陷漏磁场，得到了圆柱形表面腐蚀缺陷漏磁场的空间分布。在一定条件下，静态模拟的缺陷漏磁场受励磁结构中永磁铁磁场的影响较大，造成在永磁铁附近漏磁场分布的畸变。而动态模拟下得到的漏磁场只在缺陷附近有明显的变化，缺陷漏磁场受励磁结构中永磁铁磁场的影响很小，有利于对腐蚀缺陷的分析。     

浸液复合磁化探伤装置产生的磁场分析

分析了浸液复合磁化探伤装置产生的合成磁场。结果表明,该合成磁场是个平面旋转磁场,故与受检工件侧面圆柱面同心的弧状裂纹无法用穿棒法检出,而工件的退磁因子与复合磁化法中所用的磁化方式无关。     

辊套材料对铸轧区磁感应强度的影响

电磁场快速铸轧技术要求辊套材料不仅具有高导热系数、高承载能力和高抗疲劳能力,而且要具有磁场控制能力,保证铸轧区足够的磁感应强度,达到细化晶粒、改善板坯组织性能的目的.本文从介质对电磁场的集肤效应、涡流效应以及磁场衰减的角度,研究辊套对铸轧区电磁场的影响.     

成套节电技术在工业电阻炉中的应用

介绍了采用全纤维、双炉台、高发射率涂料、保护增强涂料、定向增强辐射加热元件、自动炉门压紧机构、移动罩式等技术制造的节能电阻炉的结构特点和节能原理。结果表明 ,用此技术制造的炉子减少了炉衬的蓄热损失和散热损失 ,提高了电炉加热能力和炉口的密封程度 ;该炉炉温均匀性好 ,升温速度快 ,节能效果显著 ,在此炉中进行轴承钢球化退火的单位能耗仅为 2 10kW·h/t左右。     

高阻相对La2／3Ca1／3MnO3低场磁电阻效应的影响

实验研究了La2／3Ca1/3MnO3系统晶界上掺杂(YSZ)对其输运性能和磁电阻效应(MR)的影响。样品是由溶胶．凝胶法制成的。通过对样品的电输运特性的测量表明,在掺杂量(x)低于2％时,掺杂引起电阻的增大并降低了金属．绝缘体转变温度;当掺杂量高于2％时电阻逐渐减小,且转变温度增加。而低场磁电阻效应随掺杂量增加,在x=1％时达到最大。     

Microstructure, mechanical and tribological properties of Cr1−xAlxN films deposited by pulsed-closed field unbalanced magnetron sputtering (P-CFUBMS)

Nanocrystallized Cr_1−xAl_xN films with various Al contents (0 to 68 at.%) were deposited by pulsed closed field unbalanced magnetron sputtering (P-CFUBMS). The effects of aluminum content on the microstructure, mechanical and tribological properties of the Cr_1−xAl_xN films have been investigated. It was found that the hardness and elastic modulus of Cr_1−xAl_xN films increased with increasing Al contents in the films and reached the highest value of 36 GPa and 370 GPa, respectively, at an Al content of 58.5 at.%. Addition of Al beyond 64.0 at.% resulted in a change in crystal structure from B1 cubic to B4 hexagonal phase. The wear resistance improved gradually with the increase of Al in the Cr_1−xAl_xN films. A combination of the abrasive and adhesive wear mechanism was proposed based on the SEM and EDS analysis of the wear track. The steady state dry coefficient of friction measured against a WC ball for the Cr_1−xAl_xN films were in the range of 0.36-0.55, and the wear rate was in the 10^− 6 mm³ N^− 1 m^− 1 range.     

高炉铜冷却壁凝固过程数值模拟

在对铜冷却壁砂型 金属型复合铸造条件下的热态工况进行分析的基础上,利用有限元数值模拟的方法首次建立了铸型传热分析对称模型。在模型中对铸型传热系统中的对流、辐射、接触边界条件和凝固潜热进行了处理,利用有限元分析软件ANSYS,分析了紫铜冷却壁的温度场的变化。数值模拟的结果与实际生产相当吻合。