全新冷却方式双椭圆泵浦腔的实验研究

报导一种全新冷却方式的双椭圆泵浦腔，具有较高的泵浦效率和光学均匀性。１．０６μｍ调Ｑ脉冲输出能量总转换效率η＞０．７５％     

炼油厂区内新建项目改扩建施工现场灭火器配置的分析

在对石油化工改扩建工程施工现场火灾危险因素识别评估的基础上，判定现场火灾危险等级、火灾类别，对灭火级别和保护距离进行验算，提出施工现场灭火器选型和配置方案。     

均匀设计在遗传算法中的应用研究

通过分析均匀设计和遗传算法的内在关系，指出从某个角度上可以把均匀设计看作是遗传算法的一种特例，并针对遗传算法初始参数众多、难配置的问题，提出了利用均匀设计优化配置选择参数的方法，在一定程度上可以避免遗传算法参数配置的盲目性．仿真试验结果证明了该方法是合理、可行的。     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

有机电沉积涂料的新动向

阴极电沉积涂料是 2 0世纪 70年代以来发展起来的一种新的涂装方法 ,具有挥发性有机物 (VOCs)和有害空气污染物(HAPs)含量低、防蚀能力强、漆膜质量好、涂料利用率高、适合涂装结构复杂的构件和设备等特点。介绍了近年来阴极电沉积涂料研发的新动向。它们主要集中在有机双层电涂和高分子 聚电解质 /低聚物电解质复合物多层电涂体系 ,这些新的电涂体系在涂料的稳定性以及涂层的物理化学性质和力学性能方面具有明显的改进。     

Low-resistance polysilicon process in contact application for high density devices

For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H₂-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin R_c, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.     

基于旋量和臂形标志的机器人运动学逆解计算

讨论了用旋量和指数积公式计算PUMA类型6自由度机器人运动学逆解的方法。在子问题的计算过程中，通过引入臂形标志来选取关节变量的合理解，以得到运动学逆解的唯一解。这种方法避免了对无效解的计算，可以减少计算量，提高计算效率。通过一个实验机器人的运动学逆解计算验证了算法的有效性。     

EXPERIMENTAL RESEARCH ON RADIATION FROM DOUBLE CYLINDRICAL STRUCTURES

1. INTRODUCTION Induced by unbalanced mechanical forces and moments, underwater structures vibrate and radiate The main form of underwater structures, such a submarine, is reinforced double cylindrical structure immersed in water, with fluid media filled between th double cylindrical shells. In essence, this is a coupling problem between fluid and structure. Multipl methods have been used to estimate radiation leve from underwater structures[1-9]. Musha[10] and Chertock[11] estimate the …     

NUMERICAL STUDY ON SORET-EFFECT AND DUFOUR-EFFECT FOR DOUBLE-DIFFUSIVE NATURAL CONVECTION IN POROUS ENCLOSURE

The influences of Soret effect and Dufour effect on the natural convection and heat and mass transfer for a porous enclosure were investigated by means of the penalty finite element method. Numerical results indicate that the Soret and Dufour effects have significant influences on heat and mass transfer in the presence of large temperature gradient and concentration gradient.     

C60高性能预拌混凝土的生产及应用

介绍了C60高性能预拌混凝土的研制及生产应用的过程与方法 ,对材料的性能、搅拌工艺进行了深入分析 ,为生产高强高性能混凝土提供了详细的思路