非相态稀体系三元复合驱油机理数学模型

在引进的UTCHEM数值模拟软件基础上，建立了非相态稀体系三元复合驱油机理数学模型，并利用所建立的数学模型对UTCHEM数值模拟软件进行了改进，对改进后的模型进行的模拟功能测试结果表明，模拟计算给出的水驱，聚合物驱和三元复合驱综合含水率变化曲线符号实际开采规律；三元复合驱比聚合物驱较大幅度地降低了油层剩余油饱和度，说明所建立的非相态稀体系驱油机理数学模型能够正确地模拟三元复合驱过程。     

一种高效可控恒流源

提出了一个设计高效可控恒流源方案.首先分析了影响其效率的各种因素,提出了提高效率的途径和方法.其次又给出应用微机实现双回路的测控方法及数学模型,该方案已成功的应用于某些专用设备中.     

轻武器射击系统建模及计算结果分析

通过简化臣姿持枪射击系统，利用拉格朗日方程，建立了该射击系统的物理模型和数学模型，并通过数值模拟，论述了缓冲簧对系统动态特性的影响，最后通过实验，对无缓冲簧射击系统的动态特性参数进行验证。     

杭州江北主城区排涝格局优化研究

通过分析杭州江北主城区涝灾成因和区域防御总体能力,优化城区排涝格局,提出城市包围方案,为开展新一轮城市防洪排涝规划和治理工程提供决策参考。基于区域已有的杭嘉湖区域水利综合规划、杭州市城市防洪减灾规划、杭州城西科创大走廊水利专项规划等推荐的水利防洪排涝工程基础上,采用一维河网非恒定流数学模型,建立杭嘉湖东部平原防洪水利计算模型,计算城市包围方案实施效果。研究结果表明,通过北控线建闸建泵并进行优化调度,杭州江北主城区既能满足排涝标准,主动防御,又能最大程度减轻对下游地区的防洪压力,兼顾流域防洪。该研究成果对确定城市防洪排涝方案具有借鉴意义。     

一种三端式磁通门传感器激磁电路设计

磁通门传感器是目前微弱磁场检测中较为理想的测试元件,具有高灵敏度、高精度和良好的稳定性等优点;在分析了三端式磁通门传感器的数学模型的基础上,介绍了其工作原理,即需要激励源、传感器和检测电路共同作用才可以构成完整的测量系统;同时,设计了一种三端式磁通门传感器的激磁电路,其激励电压幅值为5V,频率为5kHz;结果表明,该信号频率和幅值比较稳定,可以作为磁通门传感器的激磁信号。     

用数值模拟方法研究水驱特征曲线的结果

本文用数值模拟方法,按照大庆油田的油层条件,系统研究了水驱特征曲线的一般特征、出现直线段的时间及直线最小适用范围,同时重新评价了小井距试验区的水驱特征曲线,从而为在本油田正确使用水驱特征曲线提供了依据。文中用中期采油量倍增法估算的可采储量也可为开发决策提供参考数据。     

Human-oriented and machine-oriented reasoning: Remarks on some problems in the history of Automated Theorem Proving

Examples in the history of Automated Theorem Proving are given, in order to show that even a seemingly mechanical activity, such as deductive inference drawing, involves special cultural features and tacit knowledge. Mechanisation of reasoning is thus regarded as a complex undertaking in cultural pruning of human-oriented reasoning. Sociological counterparts of this passage from human- to machine-oriented reasoning are discussed, by focusing on problems of man-machine interaction in the area of computer-assisted proof processing.     

改进的形态学运算在声纳图像生成中的应用

声纳技术应用日益广泛,已成为海洋测量的重要工具,而去除噪声处理是对声纳图像进行正确判读的前提,本文采用了改进的形态学算法减少声纳图像中噪声的影响,对图像进行预处理,采用Matlab图形图像处理工具对处理的算法进行仿真的方式,从而使处理效果达到最佳。     

Directions for improving manual fire suppression using a physically based computer simulation

The Swedish Fire Research Board and the U.S. Federal Emergency Management Agency are sponsoring a project to further the understanding of the basic mechanisms involved, as well as to support the development of standards for and to seek ways of improving the performance of portable fire suppression systems used by fire departments.This paper describes a physically based computer model developed to simulate one aspect of the problem: the manual suppression of postflashover fires. This includes: (1) an overview of the physical basis behind the model; (2) a comparison of model predictions with available experimental data, and (3) an analysis of fire suppression effectiveness using the model.The analysis concludes that, when direct access and extinguishment of the burning fuel is not possible, improved fire control occurs with water sprays having a Rosin-Rammler distribution of droplet sizes with volume-median-drop diameters in the 0.15 to 0.35 mm range. This agrees with available experimental data. It is also shown that fire fighting venting and standoff distance requirements may lead to more severe fires requiring more water for control; although venting and water spray induced air/gas flow also serve to channel hot steam and gases away from the fire fighter adding to his safety. The analysis also shows that allowing higher gas and surface temperatures at fire control through improved fire fighter protective clothing and equipment design reduces water flow rate requirements. Additional experimental work is recommended before all these conclusions are considered definitive. Reference: L. M. Pietrzak and G. A. Johanson, Directions for Improving Manual Fire Suppression Using a Physically Based Computer Simulation,Fire Technology, Vol. 22, No. 3, August, 1986, p. 184.