氢氧化钡废渣的综合利用

复分解法生产氢氧化钡过程中产生的硫，锌废渣有很高的回收利用价值，采用负压（真空）操作，液碱吸收，盐酸法联产氯化锌、硫氢钠和沉淀硫酸钡，使氢氧化钡废渣得到了很好的利用，这种联产方式工艺简单，技术先进，生产安全，经济效益较好。     

阴图PS版感光层的光交朕

阴图ＰＳ版感光层的光交朕曹曙光，王仁祥，曹维孝（北京大学化学与分子工程学院，北京１００８７１）关键词重氮树脂；成膜树脂；阴图ＰＳ版；光交联阴图ＰＳ版感光层主要是由成膜树脂和感光树脂组成。感光树脂一般是二苯胺或取代二苯胺重氮树脂．成膜树脂类型较多。就成...     

负离子乳胶漆的研究及应用进展

介绍了空气中负离子的作用、负离子乳胶漆释放负离子的原理和国内外负离子乳胶漆产品的研发进展。     

Thermal strain of high strength polyethylene fiber in low temperature

High strength polyethylene fiber (Toyobo, Dyneema® fiber: hereinafter abbreviated to DF) has a negative thermal expansion coefficient. Relation between fiber structure and thermal strain of DF used as reinforcement of DF reinforced plastic (DFRP) for cryogenic use was investigated. The crystallinities and orientation angles of several kinds of polyethylene fibers having different modulus from 15 to 134Gpa (herein after abbreviated to DFs) were measured by NMR and X‐ray. We obtained the parameters of the mechanical series‐parallel model composed of crystal and amorphous by crystallinity and modulus. Thermal expansion coefficients of DFs were estimated by mechanical series‐parallel model. All DFs having different modulus showed negative thermal expansion coefficients in the temperature range from 180 to 300K, and absolute values of those markedly increased by increasing tensile modulus of DF. The estimated thermal expansion coefficients showed negative values, and thermal strains showed a similar curve to observed ones mostly. Average thermal expansion coefficients in the temperature range from 180 to 300K estimated by mechanical model agreed with the observed ones. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2918–2925, 2004     

锂离子电池炭负极材料研究现状与发展

综述了近年来各种炭材料作为锂离子电池负极材料的新进展，着重分析了石墨、焦炭和难石墨化炭在放电容量、不可逆容量损失、充放电电位和充放电速率等主要性能上的差异以及与其结构之间的联系；指出以PAS为代表的热解炭(低于800℃)和纳米炭材料将是锂离子电池负极材料的发展方向。     

一种反激式双输出DC/DC变换器的设计与实现

针对市场上DC/DC开关电源高压输出时,输出电压纹波较大问题,介绍了一种±50 V双输出DC/DC开关电源的设计方法及测试结果。该电路采用电流控制型PWM控制芯片,工作于反激模式。输入输出通过光耦实现隔离。该DC/DC变换器具有带负载能力强、纹波低、输出电压高等特点,可为电子设备提供稳定的供电电压。     

The Effect of Aluminum Ions on the DC Etching of Aluminum Foil

A study has been made of the electrochemical etching of 99.99% aluminum foils at a current density of 50 mA cm^–2in AlCl₃–HCl solutions (1 m Cl^–) at 80 °C. The solutions were made by dissolving metallic aluminum into 1m HCl solution, to give a Cl^– concentration of 1 m. The number density of etch tunnels and the homogeneity of tunnel length decreased, and the mean pit size and its standard deviation increased with increasing Al³⁺ concentration. The results were discussed based on potential transients at a current density of 50 mA cm^–2, current–potential curves at a scan rate of 10 m Vs^–1 and electrochemical impedance spectra.     

一种低交叉调整率的四路输出DC/DC变换器设计

介绍了一款四路输出DC/DC变换器的设计,并给出了主要技术指标、组成方框图、电路原理图和变压器的绕制方法。该设计在保证纹波噪声、效率、体积和重量等重要指标均满足要求的情况下,仍具有低交叉调整率的突出优点。     

两种高压直流电源的比较及在铜冶炼烟气制酸装置电除雾器中的应用

论述恒压源与恒流源两种高压直流电源的工作原理和技术特点.对两种电源常见故障的原因进行分析，提出相应的解决方法。介绍两种电源在230kt／a诺兰达炉冶炼烟气和270kt／a转炉冶炼烟气制酸装置的电除雾器中的使用情况.     

电网电压不平衡且严重畸变时的软件锁相技术

针对传统软件锁相环（SPLL）在三相电压不平衡且严重畸变条件下不能准确跟踪电网电压的频率和相位的问题。本文提出了一种基于相序解耦（SDR）级联二阶广义积分（SOGI）的新型软件锁相模型,通过SDR和SOGI实现了正负序分离,电压基波提取,以及滤波功能,有效地消除了负序分量、谐波分量对准确获取频率和相位信息的影响。仿真结果表明在三相电压不平衡且严重畸变的条件下,该新型SPLL能够准确地锁定电网电压的频率和相位,从而有效性地验证了新方法的正确性。