Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

量子阱红外探测器能带结构的计算

利用电子波在阱与垒的界面上的反射及干涉效应，计算了量子阱红外探测器(QWIP)的能带结构，并对其适用性进行了分析和讨论。通过与K-P模型比较发现，本方法对计算较宽势阱(阱宽大于4nm)的量子阱结构的电子态适合。在垒宽和阱宽不变条件下，用两种方法计算得到的AlGaAs／GaAs量子阱材料中Al组分x与吸收峰值波长λp的关系曲线基本相同。结果说明，在较宽的范围内，本方法对QWIP能带结构的计算是适用且简便的。     

一种新的HEMT小信号模型参数提取方法

介绍了一种高电子迁移率晶体管(HEMT)的小信号参数提取方法——综合多偏置点优化参数提取法。该文首先推导并提出了器件的模型、确定外部参数和内部参数，其次介绍了多偏置点优化算法。最后，以PHEMT器件为例进行鲁棒性和精确性测试，实验采用一系列随机起始值，结果表明，提取的参数值与经验值相差小于1％。     

Numerical Simulation of Thermal Stress Fields in the Magnetic Quenching Process of 45 Steel

Based on a transient temperature distribution of a 45 steel cylinder workpiece during magnetic quenching, which was obtainedby solving the governing equations with nonlinear boundary on the condition of coupling effects of heat-magnetism. Accordingto the     

基于通信信道的视频传输系统的设计

提出了一种利用PCM基群信道进行视频信号传输的方法,介绍了传输系统的工作原理,对视频编码器进行了较为详细的分析,并采用数字信号处理器作控制器,实现了视频信号的实时传输。     

Identification and modelling of aerobic hydrolysis – application of optimal experimental design

Hydrolysis mechanism plays a dominant role in the delicate balance of electron donor/electron acceptor ratios in BNR and EBPR systems as an important carbon source. In this study, the surface‐saturation‐type hydrolysis kinetics was investigated based on respirometric measurements, within the context of the theoretical and the practical identifiability of mathematical models. The identifiable parameters of a selected model were derived from respirograms. In addition, the information from the experiments was evaluated on the basis of Optimal Experimental Design (OED) methodology for different initial conditions of the batch respirometric experiment. © 2003 Society of Chemical Industry     

关于移动信道分析模型的研究

移动信道特性的研究是移动通信系统研究领域中最重要的部分，也是近年来研究的热点之一。其中多径传播和阴影效应是信道的主要特点，几乎任何统计特性都建立在此基础上。主要是介绍一种移动信道的分析模型，该模型的地理环境为市区，即移动台和基站之间不存在直视波（LOS），并从多普勒功率谱的角度给出了接受信号振幅和相位的概率密度函数（PDF）盈自相关和互相关函数。     

广义预测控制系统的仿真软件设计与开发

介绍了基于广义预测控制的模型预测控制（MPC）系统仿真软件的开发与实现过程。该软件包含了MAC，IMAC，DMC，DDMC和GPC五种预测控制算法，可以用不同的方法实现对预测控制系统的综合性仿真以及控制器参数的调整。利用该软件可对模型预测控制系统的作用机理做进一步仿真分析，并有助于定性分析各种算法中设计参数对系统性能的影响以及不同算法之间的区别。     

Decreasing miscibility with greater heterogeneity in ternary polymer blend: poly(cyclohexyl methacrylate), poly(α‐methyl styrene) and poly(4‐methyl styrene)

A ternary blend system comprising poly(cyclohexyl methacrylate) (PCHMA), poly(α‐methyl styrene) (PαMS) and poly(4‐methyl styrene) (P4MS) was investigated by thermal analysis, optical and scanning electron microscopy. Ternary phase behaviour was compared with the behaviour for the three constituent binary pairs. This study showed that the ternary blends of PCHMA/PαMS/P4MS in most compositions were miscible, with an apparent glass transition temperature (T_g) and distinct cloud‐point transitions, which were located at lower temperatures than their binary counterparts. However, in a closed‐loop range of compositions roughly near the centre of the triangular phase diagram, some ternary blends displayed phase separation with heterogeneity domains of about 1 µm. Therefore, it is properly concluded that ternary PCHMA/PαMS/P4M is partially miscible with a small closed‐loop immisciblity range, even though all the constituent binary pairs are fully miscible. Thermodynamic backgrounds leading to decreased miscibility and greater heterogeneity in a ternary polymer system in comparison with the binary counterparts are discussed. © 2003 Society of Chemical Industry     

Properties of Quaternary Alloy Magnetic Semiconductor (InGaMn)As Grown on InP

We have studied properties of quaternary alloy magnetic semiconductor (InGaMn)As grown on InP substrates by low-temperature molecular-beam epitaxy (LT-MBE). A large MCD peak whose intensity is larger than 500 mdeg for (InGaMn)As was observed. This peak intensity was about three times larger than that of typical (GaMn)As films. Relatively high Curie temperature of 83 K of [(In_0.53Ga_0.47)_0.88Mn_0.12]As was observed by Hall measurements. The carrier concentration of [(In_0.53Ga_0.47)_0.88Mn_0.12]As was estimated to be more than 1.0 × 10²¹ cm^–3 by using the Curie–Weiss fitting of the Hall coefficient R _H, indicating that more than 40% of Mn atoms are activated. This means that (InGaMn)As has a higher activation ratio of Mn as acceptors than (GaMn)As.