基于粗轧镰刀弯的精轧跑偏预控模型及应用

带钢热轧跑偏问题是影响带钢生产与板形质量的重要因素。轧制生产过程中,由于粗轧中间坯头部弯曲导致的精轧堆钢事故频发,不仅严重危害生产稳定性,还造成资源的严重浪费和企业的经济损失。为了解决上述问题,针对粗轧非对称板形影响因素,结合实测粗轧中间坯以及工艺过程数据,建立中间坯头部预控模型,并利用加权最小二乘法与模型自学习对模型增益系数进行优化,最终建立了基于粗轧镰刀弯的精轧跑偏预控模型。将模型计算值应用于现场生产后,有效降低了精轧带钢头部跑偏,具有较好的参考价值和指导意义。     

MICROSTRUCTURES AND TEXTURES IN COLD-ROLLED ALUMINIUM STRIP

ＭＩＣＲＯＳＴＲＵＣＴＵＲＥＳＡＮＤＴＥＸＴＵＲＥＳＩＮＣＯＬＤＲＯＬＬＥＤＡＬＵＭＩＮＩＵＭＳＴＲＩＰ①ＮｉｅＺｕｏｒｅｎ，ＺｈａｎｇＸｉｎｍｉｎｇ，ＹｉｎＺｈｉｍｉｎＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｒｉ...     

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods

A study was undertaken in an attempt to quantitatively describe the rolling process of eutectoid steel rods. Finite element method was employed to model plastic flow and heat transfer in the deformed material, and heat transfer during cooling to ambient temperature. The numerical calculation gave an assessment of the strain, strain rate and temperature distributions in the work piece. This allowed the prediction of the austenite microstructure evolution during the process. Finally, the relationships describing the microstructure-mechanical properties were used to quantitatively characterize the influence of processing parameters on strength of rods after rolling.     

连铸连轧过程中SPA-H钢板表面的氧化锈蚀

利用光学显微镜、扫描电镜、能谱和XRD衍射物相分析等手段,研究了SPA-H钢经连铸连轧后表面黄色锈斑的形成原因.结果表明,黄色锈斑的外层主要由Fe2O3、里层由FeO组成,在钢板表面呈条带状分布;而无黄色锈斑的钢板表面主要是由FeO组成.黄色锈斑是由于在轧制过程中,钢表面的高温氧化产物（FeO）破裂,在随后的冷却过程中破裂处特别是裂纹的尖端形成大量的Fe2O3所致,高温氧化产物FeO的应变速率和该氧化膜的横向生长比较高,高温氧化膜开裂后,裂纹不能自愈,较低温度时合金表面发生了线性氧化.     

Roll force,torque, lever arm coefficient,and strain distribution in edge rolling

Due to the growing importance of width control in strip and plate mills, edge rolling is currently an im-portant process in hot rolling mills. Research in edge rolling has been carried out, and in the present ar-ticle, models for roll force, torque, and lever arm coefficient are derived using the upper bound method. A simple, kinematically admissible deformation zone and velocity field, independent of friction in the roll gap, is proposed, and the energy dissipation rate is derived. The formula for energy dissipation rate has, in practice, no limitation because all edge rolling geometries are safely in the area where the formula is valid. Roll force and torque are derived by means of two independent integrals. Thus, the lever arm coef-ficient is evaluated from the expressions for roll force and torque using conventional rolling theory. Roll-ing trials report good agreement with theory. Measured roll forces are similar to calculated forces. Furthermore, the shape of the dogbone that arises during edge rolling is in fairly good agreement with the calculated dogbone shape. Deviations are due to the deviation from ideally plastic material in the ex-periments. Also, the strain distribution over the dogbone is similar to the proposed deformation zone. Thus, a new formula has been developed to a stage that it can be implemented in width control systems for edge rolling stands in hot strip and plate mills.     

楔横轧轧齐基本理论研究

分析了台介成形过程中模具及金属变形的特点。发现产生螺旋状台阶的原因及其存在区间。从理论上阐明了设计楔横轧模具过渡段应遵循的准则。对比分析了多种满足过渡段设计准则的方案，指出最佳过渡方案为截止轧齐法，并给出了求解轧齐曲线方程的三种体积平衡原理及相应公式。最后应用微体积平衡原理求解了斜台阶轧齐曲线方程。     

重钢高线轧机生产工艺设计

在原有国产高线轧机基础上,经改进,如采用新型闭口式轧机,超高速机架,顶交无扭精轧机组等。为重钢高线车间进行了设计,终轧保证速度达到８０ｍ／ｓ,使我国高线轧机国产化达到了新阶段。     

镁合金材料的应用及其加工技术的发展(1)

第一部分较全面地介绍镁及镁合金材料在交通运输、航空航天、电子工业、核能工业、化工、冶金等部门的应用方向与实例。第二部分简要地论述镁合金材料的加工技术，重点介绍镁合金新材料的研发、熔炼铸造工艺、压铸成型工艺、挤压技术、锻压技术与轧制技术的进展。指出镁合金是一种很有发展前景的新型金属材料，其加工技术将获得进一步的快速发展。     

PHYSICAL SIMULATION OF INTERFACIAL CONDITIONS IN HOT FORMING OF STEELS

1.~nonNUInericalmodellingbythefiniteelement(FE)methodhasbecomeaneffectiveandeconomyicmeansforsimulatingmetalfoeingprocesses.However,accuratemodellingdemandsthecorrectdefinitionandinputsofthedataforthethermalandphysicalpIDPertiesoftheworkpieceandtoolmaterials,theboUndaryconditionsattheworkpiece--toolinterfaceandinotherareas,inadditiontoappropriatemeshgenerationandnumericalsolutions.Althoughmostofthematerialdataareavailable,thedataforinterfacialheattransferandfrictionconditions,Whichhavesubst…     

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg-Li ALLOY WITH Ca ADDITION

Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys ormalin. while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength （UTS） and yield strength （YS） of the alloy with lwt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3phase worsens the elongation.