Joint Synchronization and Channel Estimation for OFDM Systems

1Introduction Orthogonal Frequency Division Multiplexing(OFDM) has become a popular technique for transmis-sion of signals over wireless channels . OFDMhas beenadoptedinseveral wireless standards such as Digital Au-dio Broadcasting ( DAB) , Digital Video Broadcasting(DVB-T) ,the IEEE 802 .11a[1]Local Area Network(LAN) standard and high performance LAN type 2(HIPERLAN/2)[2]standard. OFDMis also being pur-sued for Dedicated Short-Range Communications(DSRC) for road side to …     

二滩电厂双缸液压启闭机原理及故障分析

二滩电厂表孔采用弧形门,启闭形式为双缸液压启闭机.自投入运行以来,运行状况良好.汛期启闭方式已由原来的现地手动操作过渡到远方控制自动启闭.在闸门起落的过程中,由于工况的不同,两缸会出现不同步现象,因此设计中考虑了纠偏回路.本文简单介绍了二滩电厂表孔液压启闭机的原理和故障情况.     

基于FPGA的位同步信号提取

同步是通信系统中一个非常重要的实际问题。在同步通信系统中,同步系统性能的降低会导致通信系统性能的降低,甚至使通信系统不能正常工作。因此,同步是信息能够正确可靠地进行传输的前提。介绍一种基于FPGA的锁相环位同步提取技术的原理,并用VHDL语言编程实现,在QuartusⅡ下编译仿真通过,给出仿真波形图。经分析该设计稳定可靠,且能够完成要求。     

几种典型液压同步系统探讨

针对目前我们大工业生产中常用的几种液压同步系统进行了分析,指出了各同步系统中的优缺点,并且专项对于比例同步系统进行了分析和探索。     

卷取机前侧导板的设计结构分析

卷取机前侧导板的作用是把带钢对准轧制中心线送入夹送辊,并在进入夹送辊时导板夹持带钢以减少钢卷的塔形。     

Using linear models in optimizing parameters of time-triggered protocols

A mechanism of synchronization of components of distributed systems in which communications are based on a common time schedule for all system components is illustrated by examples of simple Time-Triggered Protocols. For parametric linear models of synchronization, the optimization problem is considered for a parameter that should exclude the overlapping of messages in communication channels. The results of using numeric methods for estimation of the optimal value of this parameter are described. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 24–32, May–June 2006.     

YH-F2的处理机间通讯

银河仿真Ⅱ型机ＹＨ－Ｆ２是高性能的全数字仿真计算机，处理机间通讯是ＹＨ－Ｆ２采用的关键技术之一。本文分三个部分介绍了ＹＨ－Ｆ２的处理机间通讯：①处理机通讯指令，③处理机间数据传输，③Ｉ／Ｏ处理机ＩＯＰ与通讯控制处理机ＣＣＰ之间的通讯。     

数字水印攻击及对策分析

数字水印技术作为数字媒体版权保护的重要手段越来越引起人们的重视。文章讨论了数字水印的概念、特征,重点介绍了数字水印的鲁棒性及影响数字水印鲁棒性的因素,总结和分析了数字水印主要攻击方式并提出相应的应对措施。     

深圳抽水蓄能电站同步时钟系统应用研究与实践

新能源项目设备高度自动化并具有分布控制特点,集中管理又需要将分布分散的多个控制系统用统一的时钟进行同步,以达到在事件顺序中相对准确记录动作的先后及时点的目的,一套性能优异的北斗卫星和GPS双冗余时钟源同步时钟系统对实现智能水电厂具有重大意义。从设计、优化和现场安装调试、投入使用等阶段,对深圳抽水蓄能电站同步时钟系统建设进行了论述。     

Electronic locking devices based on microcontrollers and chaotic maps using Model-Matching Control

In this work a real-time communication system using Arduino® microcontrollers, applied to electronic locking devices, is implemented. Model-Matching Control is used to achieve synchronization between transmitter and receiver Arduino® microcontrollers using only one transmission channel. Model-Matching Control is fed with dynamics from both Arduinos. Transmitter Arduino® is used also to generate in real-time an encrypted chaotic code key based on the Chen map. Receiver Arduino® recover in real-time the chaotic code key that is a binary signal key of an electronic locking device and where wireless communication is made between the two Arduinos using Bluetooth modules. System evaluation in terms of performance, randomness, and time complexity, are shown, as well as experimental results and some discussions are presented.