钢筋网焊机自动生产线的实时控制

在网焊机自动化生产线的研制中,由于点焊控制器、自动上料机构中焊点总数多、驱动路数多、网格间距小、运行速度快,因而对控制系统的实时性提出了较高要求,用工控机与单片机、PLC组成的网焊机控制系统,在软、硬件实现上采取多种方案有机结合,实现了网焊机生产线的高速实时控制。     

可编程序控制器PLC的抗干扰措施

对可编程序控制器系统常见的一些干扰现象进行分析，对不同的干扰采用了相应的防护措施。     

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

高压低温先导式安全阀的设计

介绍了一种某试验系统用高压低温先导式安全阀,主要从工作原理、结构特点、材料的选用、结构特点、试验等方面进行阐述。     

FY-14吸附剂用于大庆减三线润滑油基础油精制

采用有机酸改性活性白土FY—14吸附剂对大庆减三线润滑油基础油的脱氮效果进行详细考察，并与活性白土进行对比。研究结果表明，白土精制温度较高，在150℃时5．0％白土用量的碱性脱氯事为88．3％，而在100℃时2．5％FY-14吸附剂用量的碱性氮脱除率为95．6％，硫脱除率为13．2％，旋转氧弹值为268min。随着碱性氯脱除率提高，精制油折光率呈不断下降趋势。上述实验结果表明，采用FY—14吸附荆精制基础油可达到节能降耗、提高基础油收率和氧化安定性的效果。     

Assessing the role of basic control measures, antivirals and vaccine in curtailing pandemic influenza: scenarios for the US, UK and the Netherlands

An increasing number of avian flu cases in humans, arising primarily from direct contact with poultry, in several regions of the world have prompted the urgency to develop pandemic preparedness plans worldwide. Leading recommendations in these plans include basic public health control measures for minimizing transmission in hospitals and communities, the use of antiviral drugs and vaccination. This paper presents a mathematical model for the evaluation of the pandemic flu preparedness plans of the United States (US), the United Kingdom (UK) and the Netherlands. The model is used to assess single and combined interventions. Using data from the US, we show that hospital and community transmission control measures alone can be highly effective in reducing the impact of a potential flu pandemic. We further show that while the use of antivirals alone could lead to very significant reductions in the burden of a pandemic, the combination of transmission control measures, antivirals and vaccine gives the most 'optimal' result. However, implementing such an optimal strategy at the onset of a pandemic may not be realistic. Thus, it is important to consider other plausible alternatives. An optimal preparedness plan is largely dependent on the availability of resources; hence, it is country-specific. We show that countries with limited antiviral stockpiles should emphasize their use therapeutically (rather than prophylactically). However, countries with large antiviral stockpiles can achieve greater reductions in disease burden by implementing them both prophylactically and therapeutically. This study promotes alternative strategies that may be feasible and attainable for the US, UK and the Netherlands. It emphasizes the role of hospital and community transmission control measures in addition to the timely administration of antiviral treatment in reducing the burden of a flu pandemic. The latter is consistent with the preparedness plans of the UK and the Netherlands. Our results indicate that for low efficacy and coverage levels of antivirals and vaccine, the use of a vaccine leads to the greatest reduction in morbidity and mortality compared with the singular use of antivirals. However, as these efficacy and coverage levels are increased, the use of antivirals is more effective.     

运用PLC技术改造385m~2凯利式叶滤机控制系统

根据生产实践 ,结合PLC的技术特点和 385m2 凯利式叶滤机的电气联锁特性 ,阐述了应用PLC技术 ,可进一步提高 385m2 凯利式叶滤机的运转率和自动化水平。     

炼钢中间包塞棒液压伺服比例控制系统的应用

济钢第三炼钢厂中间包塞棒液压伺服比例控制系统采用伺服比例阀和伺服缸等,系统设计完善,功能齐全,可实现塞棒位置的闭环控制,保证了结晶器中钢水液面的稳定。     

一种基于GE90-30PLC的飞剪自动控制系统

本文介绍了调整线材轧线精轧机前专用于切头的启停式飞剪的自动控制系统。该系统以GE90—30PLC为控制核心，辅以热金属HMD、光电编码器等元件，能很好地完成飞剪的剪切及定位。其中着重阐述了飞剪控制中各个重要参数的计算原理和方法。     

应当规范排(进)气阀的生产

输、配水管网因排气不畅而引发气爆型水锤，从而导致爆管的事故时有发生，经补救后再次发生爆管事故的也并不鲜见。近年来，我国的长距离、大口径管道输水工程快速发展，管道输水的排（进）气设计和排（进）气阀的规范生产问题应当引起重视。文中列举了有压管道输水系统中气体产生的原因、赋存形态和危害，对规范排（进）气阀的生产提出了建议。