基于改进快速幂次趋近律的永磁同步电机滑模控制

针对永磁同步电机(PMSM)滑模控制指数趋近律中趋近速度与抖振之间的矛盾问题,基于快速幂次趋近律提出一种幂次项系数自适应调节的新型趋近律。所提趋近律将系统状态引入幂次项系数中,实现了系统状态由较远处到滑模面附近的趋近过程中加入幂次项的作用,在保证幂次项特点的前提下,动态响应过程的收敛速度大大提高。负载转矩是滑模速度控制器中的一个扰动项,设计了带有幂次项的滑模观测器,将观测值作为转矩前馈补偿。仿真结果表明,与快速幂次趋近律相比,所提趋近律具有更快的收敛速度,负载观测器能准确跟踪负载变化,提升了系统抗扰性能。     

基于矢量拟合法的永磁同步电机EMI模型

电动汽车中永磁同步电机常采用星型联结,因此建立星型联结的永磁同步电机高频阻抗模型是有必要的。首先,采用常见的电机EMI模型（π型）作为星型联结的永磁同步电机EMI模型,使用矢量拟合法推导电机EMI模型等效电路的阶数。在20 Hz~30 MHz范围内,永磁同步电机π型EMI模型的等效电路需要225个储能元件,为了降低电机EMI模型等效电路的复杂性,进一步分析了Γ型阻抗模型和反Γ型阻抗模型,将星型联结的永磁同步电机EMI模型的等效电路储能元件数降到56个。通过对比3种阻抗模型的端口阻抗特性,验证EMI模型优化方法的可行性。将电机EMI模型的等效电路代入电机驱动EMI仿真系统中进行时域仿真,仿真时域波形经EMI接收机模型处理得到噪声频谱。在150 kHz~30 MHz频率范围内,电动机驱动系统EMI接收机测试结果与仿真结果基本一致。     

新型环保智能型熟料火车散装系统的开发设计

为满足国家环保要求及现代化企业智能化的要求,解决现有熟料火车散装存在的问题和缺陷,开发设计了新型环保智能型熟料火车散装系统。本文对新型环保智能型熟料火车散装系统进行了介绍,阐述了系统设计理念和工作原理,通过计量系统、装车系统和收尘系统连锁反馈手段,实现了实时在线计量,智能移动装料,达到了作业效率高,智能化程度高,收尘效果好的目的。     

Improvement of coercivity and thermal stability of Nd-Fe-B sintered magnets by intergranular addition of Tb80Fe20 alloy

To improve the coercivity and temperature stability of Nd-Fe-B sintered magnets for high-temperature applications, the eutectic Tb₈₀Fe₂₀ (wt%) alloy powders were added into the Nd-Fe-B sintered magnets by intergranular method to enhance the coercivity (H_cj) and thermal stability. The microstructure, magnetic properties and thermal stability of the Nd-Fe-B magnets with different Tb₈₀Fe₂₀ contents were studied. The experimental results demonstrate that the coercivity (H_cj) of the sintered Nd-Fe-B magnet is significantly enhanced from 14.12 to 27.78 kOe, and the remanence (B_r) decreases not obviously by introducing 4 wt% Tb₈₀Fe₂₀ alloy. Meanwhile, the reversible temperature coefficients of coercivity (β) and remanence (α) of the Nd-Fe-B magnets are increased from ?0.5634%/℃ to ?0.4506%/℃ and ?0.1276%/℃ to ?0.1199%/℃ at 20–170 ℃, respectively. The Curie temperature (T_C) of the Nd-Fe-B magnet is slightly enhanced with the increase of Tb₈₀Fe₂₀ content. Moreover, the irreversible flux magnetic loss (h_irr) is obviously reduced as Tb₈₀Fe₂₀ addition increases. Further analysis of the microstructure reveals that a modified microstructure, i.e. clear and continuous RE-rich grain boundary layer, is acquired in the sintered magnets by introducing Tb₈₀Fe₂₀ alloy. The associated mechanisms on improved coercivity and thermal stability were comprehensively researched.     

Mo的替代对FeNbBCu软磁纳米晶合金磁谱的影响

本文研究了Fe82Nb7-xMoxB10Cu1(x=0,1,3,5）系列纲伙晶软磁合金中Mo的含量对磁导率谱（频率范围1kHz-1MHz)的影响，并用畴壁钉扎理论进行了解释，在磁谱中观测到随着Mo含量的增加，弛豫频率线性地上升，μ′随外加磁场幅度变化曲线表明其原因在于Mo的替代导致了钉扎场的增强。     

锆基块体非晶合金的力学性能研究进展

本文叙述了锆基块体非晶合金的制备方法，优异的性能，特别是对其力学性能研究领域的最新进展进行了综述。并与传统晶态合金作了适当的对比，锆基块体非晶合金具有优异的力学性能，如弹性比功、超塑性、断裂韧性等，此类合金的应用将不断拓宽。     

Enabling factors toward production of nanostructured steel on an industrial scale

Utilizing the existing properties of steel, a modern technological society has been constructed. While there are over 25,000 worldwide equivalent steels based on manipulating the eutectoid transformation, there exist only a handful of commercial nanostructured steel alloys based on manipulating the more complex glass devitrification transformation. Thus, research on nanostructured steels is in its infancy, and many further developments are expected with the demonstrated promise of developing new combinations of superior properties. In this article, seven enabling metallurgical factors are presented that ultimately allow a variety of nanostructured steel products to be produced in an ever-increasing array of industrial processing techniques. Additionally, a case example of the formation of nanostructured steel are given showing how these factors can be harnessed on an industrial scale.     

Zr41.5Ti14Cu13Ni10Be22.5大块非晶的耐蚀性能

用浸泡法研究了ZrTiCuNiBe大块非晶合金在酸、碱、 盐各种腐蚀性介质中的腐蚀行为.并与典型材料做了比较，结果表明：ZrTiCuNiBe大块非晶合金具有良好的耐蚀性.     

Nanocrystalline Nd2Fe14B／α—Fe permanent magnet

Nd8.5Fe75Co5Cu1Zr3Nb1B6.5bonded magnet was prepared by melt-spinning(vs=18m/s)and subsequent heat treatment(670℃，4min).Excellent magnetic properties of the bonded magnet were achieved:Br=0.68T,iHc=620.3kA/m,(BH)max=74kJ/m^3.The addition of Cu and Zr elements shows to be advantageous in improving an intrinsic coercivity and squareness of hysteresis loop,as well as energy product.In has a remarkable remanence enhancement and the isotropic saturation remanence ratio Mr/Ms is 0.83.     

熔融织构YBCO块样品的磁特性研究

对MTG区熔生长法,慢冷法,粉末熔融生长法这3种方法制备的熔融织构YBCO块样品进行了交流磁化率和磁阻的测量。根据实验结果计算了样品的钉扎势,并且发现3种方法制备的样品在150 mT外磁场下均显示出基本消除弱连接的特性;粉末融熔生长法所制样品中有较纯净123相和较好织构,质量最好。