A new approach to modelling of single droplet drying

A model was developed to predict the change in droplet mass and temperature when it is exposed to hot air, as in spray drying of droplets containing solids. The droplet was assumed first to undergo sensible rapid heating with no mass change. Then the droplet experiences some shrinkage, with no temperature change but rapid mass losses, followed by a period of crust formation with a significant change in droplet mass and temperature and finally a short period of sensible heating of the dried particle. The model, unlike previous models, accounts for shrinkage and for the temperature distribution in the droplet. It provided a good prediction for the change in droplet temperature and mass for some of the experimental measurements available in the literatures.     

任意取向多个介质旋转椭球的散射场

本文提出了一种用于计算任意取向多个介质椭球电磁散射的混合方法.利用扩展边界条件(EBC)导出具有旋转轴对称单个椭球以球面波矢量函数为基底的T矩阵,结合球矢量波函数旋转定理和递推T矩阵方法,给出多个任意取向介质椭球的散射场.数值例子验证了该混合方法的计算精度和有效性.     

On the determination of optimal transition profile of a stepped bar in tension or in torsion by BEM

The objective is to have uniformly distributed tangential stresses on the transition profile of a stepped bar subjected to tensile and torsional loading using an axisymmetric boundary element formulation. The transition curve is represented by the Langragian interpolation polynomial with progressive degrees to avoid shape distortion during the optimization procedure. The calculated result is compared with that obtained by fluid dynamics given in the literature. It is seen that the transition curve obtained in this paper is reasonable.     

生物包粒的分类与命名——兼论徐州大北望中下寒武统生物包粒特征

对于碳酸盐岩中由生物及生物化学作用形成的具有同心或放射结构的异化颗粒(生物包粒),已为人们所熟悉,但目前还没有统一的分类与命名。本文在研究徐州大北望中下寒武统生物包粒特征的基础上,结合已有研究成果,对由生物及生物化学作用形成的具有同心或放射状内部结构的碳酸盐颗粒,按其粒度和形成颗粒的生物类型不同进行分类命名,提出分类命名的原则。     

用分析－数值法求解非线性包装系统的产品破损边界曲线

应用非线性动力学方程的分析－数值解法，推导了矩形冲击时非线性包装系统的破损边界曲线，研究了非线性项对破损边界曲线的影响，分析了影响破损边界曲线安全区范围大小的因素。     

双滑动氧枪的应用

叙述了φO114双焊缝氧枪存在的问题及改型后单焊缝双滑动氧枪的优点及使用效果。     

DIRECT RESONANCE OF TURBULENT BOUNDARY LAVER OVER COMPLIANT WALLS

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｉｎｇｏａｌｏｆｔｈｉｓｐａｐｅｒｉｓｔｏｅｘｐｌｏｒｅｔｈｅｐｏｓｓｉｂｉｌｉｔｙｔｏｌｅａｒｎｍｏｒｅａｂｏｕｔｔｈｅｍｅｃｈａｎｉｓｍｏｆｔｕｒｂｕｌｅｎｔｂｏｕｎｄａｒｙｌａｙｅｒｆｌｏｗｉｎｔｅｒａｃｔｉｏｎｓａｎｄｉｔｓｅｆｆｅｃｔｓｏｎｃｏｍｐｌｉａｎｔｗａｌｌｐｅｒｆｏｒｍａｎｃｅ．Ｔｈｅｒｅａｒｅｃｅｒｔａｉｎｐｒｅｒｅｑｕｉｓｉｔｅｃｏｎｄｉｔｉｏｎｓｔｏｆｕｒｔｈｅｒｔｈｅｓｔｕｄｙｏｎｔｈｅｍｅｃｈａｎｉｓｍ，ｉ．ｅ．ｔｈｅｃｏ…     

遥感在水面薄层研究中应用的可行性分析及其验证

从遥感测温的基本原理出发，结合发生在水面热力薄层内热结构变化的物理特征，分析了遥感技术用于监测水面薄层热结构垂直温度廊线与变化的可行性。据此，在气一水热力薄层的实验室模拟研究中得到了应用与验证，经实验证实这种新技术与常规手段结合可为水面热力边界层研究提供可靠的数据来源。由此认为，这一方法的研究将在微尺度海面过程、全球气候变化和水一气间能量通量研究中有着广阔的推广应用前景。     

Grain Boundary Sliding in Fatigue of Pure Aluminum

The distributions of plastic strain near grain boundaries induced by fatigue loading were investigatedby the fiducial grid method in pure aluminum specimens, and the resulted grain boundary sliding(GBS) was systematically analysed. The results show that the strain field near a grain boundary isnonuniform. GBS is restricted by the junction of grain boundaries and causes discontinuities of bothdisplacement and strain. A peak value of shear strain was created in short-range area across the grainboundary. GBS plays an important role in cyclic softening and secondary hardening. The control fac-tor of GBS is the relative orientation between two grains and the macro orientation of the grainboundary rather than the ∑ value of the boundary.     

On slippage induced by surface diffusion

The mechanism of surface diffusion is taken at the basis of the phenomenon of slippage of the contact line of a liquid film. With the aid of the condition of continuity of the traction vectors at the solid-liquid interface, we obtained an evolution equation for the velocity of the fluid particles at the wall which shows a marked resemblance with Millikan's equation for the slippage coefficient of gases and reduces, in the limit of small surface diffusivity, to the classical Stokes-Einstein model. The influence of surface roughness is explicitely taken into account and, among other results, cases of absence of slip caused by the attachment of the liquid film to the solid surface and of slippage solely induced by surface roughness are found. Finally, the effect of the surface deformation upon the surface velocity of the fluid particles is examined in some detail.