改性双马来酰亚胺的研究

本文研究了双马来酰亚胺与烯丙基化合物形成的改性树脂体系的固化和热性能，讨论了单体配比、增韧剂、催化剂对性能的影响。     

Cd-ZSM-5沸石催化剂的制备、表征和芳构化催化性能

采用离子交换、浸渍和混合三种方法制备镉改性ZSM-5沸石催化剂,考察了改性方法和镉含量对催化剂的表面酸性和Cd状态以及芳构化性能的影响。结果表明,加入镉降低了B酸性,Cd~(2+)与沸石结合形成了L_(1612)酸中心,其生成量取决于改性方法和Cd含量,并与芳构化活性提高有直接关系。     

驱油用抗盐聚合物KYPAM的应用性能

新研制并已投入工业生产的驱油用抗盐聚合物KYPAM，为具有梳形分子结构的超高分子量的AM／AHPE共聚物（共聚单体AHPE结构未知）。按大庆企业标准《驱油用聚丙烯酰胺》的规定测定6项质量指标，KYPAM均优于大庆2B838和日本三菱MO－4000；在矿化度为1000－19334mg/L的大庆（45℃），胜利（70℃，80℃）5种清水，污水中，1000mg/L的KYPAM溶液的粘度较对比超高分子量HPAM高30％－40％；在不脱氧180小时溶液老化测试中，KYPAM粘度保持率最高，KYPAM溶液45℃剪切稳定性略高于2B838和MO－4000溶液；KYPAM在3种水中的增粘性能（粘浓曲线，45℃和70℃）均远好于2B838和MO－4000。在70℃岩心驱油实验中，KYPAM污水溶液提高水驱后采收的幅度，阻力系数和残余阻力系数均高于英国胶体公司的HPAM1285清水溶液。     

On a large-gain theorem

The aim of this paper is to give a general quantitative requirement which the loop gain must satisfy in order to stabilize a given unstable (possibly nonlinear and time-varying) plant, namely that the gain must exceed one.     

邻—(4—乙基苯甲酰基)苯甲酸的研究

本文阐述了通过Friedel-Crafts反应合成邻-(4-乙基苯甲酰基)苯甲酸的方法.研究了影响产物质量的因素,提出了适宜的工艺条件.     

压缩式致冷设备的电子宽温域多功能控制

设计并研制了一种用于压缩式致冷设备的电子式定温域多功能控制装置。它除具有控温范围宽、精度高、控温参数易调等优点外，还实现了低成本的温度显示、半自动除霜控制、加电延时保护、过欠压保护等功能。全部采用无触点控制方式，有良好的性能／价格比。     

Regulator problem for uncertain linear discrete-time systems with constrained control

A necessary and sufficient condition to test the robustness of a regulator of uncertain linear systems with constrained control is given. The candidate regulator for this test is that stabilizing nominal systems. An illustrative example is also given.     

H∞-control with measurement-feedback for Pritchard-Salamon systems

In this paper we extend the finite-dimensional results for the H_∞-control problem with measurement-feedback to a large class of infinite-dimensional systems, allowing for a certain type of unboundedness in the input and output operators (the Pritchard-Salamon class). The main result of the paper relates the solvability to the suboptimal H_∞-control problem to the existence of stabilizing solutions to certain operator Riccati equations. Furthermore, a characterization of all suboptimal controllers is given.     

Design of minimax robust LQG controllers under parameter and noise uncertainties

The problem of design of minimax robust LQG controllers for linear systems with parameter and noise uncertainties is considered in this paper. Necessary and sufficient conditions for converting this problem to a two-person, zero-sum continuous game problem are presented. A simple procedure for design of a suboptimal minimax robust LQG controller, i.e., the LQG controller for least-favourable model, is proposed. Necessary and sufficient conditions for the existence of a saddle point are established. Under these conditions, the controller obtained is exactly the minimax LQG controller. When there does not exist a saddle point, the worst-case error between the controller obtained and the minimax robust LQG controllers under described uncertainties is bounded.     

An explicit finite difference method for finite-time observers

In this paper we present a numerical method for estimating the current state of a nonlinear control system. We use finite differences to discretize a modified version of the finite-time observer equations in James. The discretized equations are simple and easily programmed. The convergence and accuracy of the scheme is proved, and the scheme enjoys a number of important properties: availability of rate of convergence estimates, good robustness characteristics, and the ability to handle certain types of discontinuities in the observations. The major disadvantage is that the number of grid points required increases exponentially with the number of state dimensions.