Heat transfer enhancement by Marangoni convection in the NH3–H2O absorption process

The objectives of this paper are to quantify the effect of Marangini convection on the absorption performance for the ammonia–water absorption process, and to visualize Marangoni convection that is induced by adding a heat transfer additive, n-octanol. A real-time single-wavelength holographic interferometer is used for the visualization using a He–Ne gas laser. The interface temperature is always the highest due to the absorption heat release near the interface. It was found that the thermal boundary layer (TBL) increased faster than the diffusion boundary layer (DBL), and the DBL thickness increased by adding the heat transfer additive. At 5 s after absorption started, the DBL thickness for 5 mass% NH₃ without and with the heat transfer additive was 3.0 and 4.5 mm, respectively. Marangoni convection was observed near the interface only in the cases with heat transfer additive. The Marangoni convection was very strong just after the absorption started and it weakened as time elapsed. It was concluded that the absorption performance could be improved by increasing the absorption driving potential (x_vb−x_vi) and by increasing the heat transfer additive concentration. The absorption heat transfer was enhanced as high as 3.0–4.6 times by adding the heat transfer additive that generated Marangoni convection.     

天然气供热供冷的技术经济分析

对冬季采用天然气热水锅炉供热，夏季采用电动离心式冷水机组供冷和冬夏季都采用天然气直燃型溴化锂吸收式冷热水机组进行供热供冷的两种方案进行了技术经济比较。指出天然气价和电价是影响供热供冷成本的最敏感因素。     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

靖边气田分离器分离效果对比分析

从理论计算分离器处理能力和现场开展试验两方面入手，对靖边气田目前在用的不同规格分离器的分离效果进行了对比分析，通过对现场数据统计和整理，得到了靖边气田不同规格分离器合理的处理气量，给气田开发建设中分离器的选型和维护改造中分离器的调整提供了依据。     

Influences of land use/cover on water quality in the upper and middle reaches of River Njoro, Kenya

Data from 10 sampling sites along the River Njoro are used to examine the contribution of nutrients from upstream land uses draining each of the sampling sites. The data also are used to assess whether both the proportion of land uses and the size of the subwatersheds account for the variability in water quality in the River Njoro watershed. Geographical Information System analysis was used to determine the spatial distribution of land‐cover types and subwatersheds contributing run‐off to the sampling sites in the River Njoro. Standard Digital Elevation Model‐based routines were used to establish the watershed area contributing run‐off to each sampling site. Water and sediment samples were collected for chemical analysis, and the nutrient levels were related to the upstream land‐use types and the size of the subwatersheds. The mid‐stream portion of the River Njoro (near Egerton University) accounts for the highest nutrient contributions. The percentage contribution is magnified by additions from industrial, human settlements and agricultural land uses around the University. There is a significant decrease in nutrient levels downstream, however, indicating natural purification as the river flows through an area of large‐scale farming with intense, well‐preserved riparian and in‐stream vegetation. Steep slopes of the land upstream of Egerton University enhance erosion and nutrient losses from those subwatersheds. Mixed small‐scale agricultural and bare lands contribute over 55% of the phosphorus load to the upper and mid‐reaches of the River Njoro. The size of the subwatershed accounts for about 53% of the variability in the soluble phosphorus in the river. The land‐use subwatershed proportions are important for characterizing and modelling water quality in the River Njoro watershed. Upland land uses are as important as near‐stream land uses. We suggest that conservation of intact riparian corridor along the river and its tributaries contributes significantly to natural purification processes and recovery of the ecological integrity of the River Njoro ecosystem.     

柴达木盆地天然气中稀有气体同位素特征

为了确定柴达木盆地勘探新层系，测试并分析了该盆地5个油气田的8个天然气样品的氦、氩同位素比值，探讨了其在大地构造背景、大地热流和气源方面的示踪意义。研究结果如下：①柴达木盆地8个天然气样品³He/⁴He值分布在2.0×10^-8～5.48×10^-8的范围，总体平均为3.7×10^-8，均在10^-8量级，体现了典型的壳源成因氦同位素的特征。②据³He/⁴He计算的大地热流值较低，分布于41.2~48.2 mW/m²之间，平均44.9 mW/m²，低于东部地区大地热流平均值73 mW/m²，表明该盆地具有较稳定的构造背景。③根据天然气⁴⁰Ar/³⁶Ar的年代积累效应，结合烃源岩分布特征推测，柴达木盆地东部凹陷区伊克雅乌汝构造伊深1井天然气应源于上第三系；西部坳陷区尕斯油田尕斯8-6井和尕斯475井天然气应源于下第三系；碱山构造碱1井天然气应源于侏罗系，碱山构造碱2井的天然气应源于上第三系；北缘块断带南八仙油气田仙试1井的天然气应源于侏罗系；南八仙油气田仙试8井和马北构造马北1井的天然气可能主要源于侏罗系。     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

天然彩色棉产品抗紫外线处理的探讨

介绍了天然彩色棉的应用现状以及对其进行抗紫外线处理的现实意义，探讨了抗紫外线处理的方法和检测手段，并结合初步的实验提出在天然彩色棉产品上进行抗紫外线处理的可行性。     

天然植物香精油的开发利用

天然植物香精油产业是一项新兴产业，满足了人们崇尚自然、追求健康的需要，具有很好的经济效益和社会效益。对天然植物香精油从用途、国内外现状、采用技术等几方面进行了阐述，得出了适用于植物香精油的最佳工艺技术和流程，采用了目前较先进的冷冻干燥技术和超临界CO2萃取技术，得到的产品具有萃取效率高、品质好等优点。