单层多跨刚架在移动荷载作用下的影响量计算方法

讨论了桥梁、工业厂房和大型公共建筑中较多采用的单层多跨刚架在移动荷载作用下影响量的计算方法。以工程中计算连续梁的一次力矩分配法的概念和思路为基础,建立了结构中杆端真实抗转刚度和结点转角传递的概念及其相应计算公式,提出了一种单层多跨刚架超静定结构影响量的精确计算方法。算例表明,该方法较之传统的计算方法简捷,且既便于手算,也利于编制通用程序用于电算。     

Limit load analysis of strength undermatched welded T-joints under bending

An increasing amount of laser beam welded T‐joints (e.g. skin‐stringer) of aluminium alloys are now in use in advanced fuselage applications designed as ‘integral structures’ for weight and cost savings. It is known that weld joints generally show lower strength (undermatching) than base metal in both laser beam and friction stir welded joints of 6xxx series Al‐alloys. Damage tolerance considerations in terms of the residual strength of such joints require limit load solutions to be used in engineering fitness‐for‐service (FFS) analysis. The paper, therefore, provides an upper bound limit load solution in closed form for welded T‐joints (idealized) with strength undermatching and subject to a bending moment. In addition to the necessary requirements of the upper bound theorem, the kinematically admissible velocity field chosen leads to a stress field, which satisfies the equilibrium equations and some stress boundary conditions in the plastic zone. This is an advantage of the solution and, therefore, it is expected that the upper bound obtained is close to the exact limit load of such joints.     

Reliability Analysis of Single-Degree-of-Freedom Elastoplastic Systems. II: Suboptimal Excitations

A method for constructing an approximation of the critical excitation that drives an elastoplastic system from rest to a target threshold at a specified time instant, referred to as the “suboptimal excitation,” is presented in this paper. It is based on the observations gained from study of the critical excitations in the companion paper. Essentially, for the usual case of interest where the failure time is not small compared to the natural period, the duration of the positive and negative pulses of the critical excitation are roughly equal to half of the natural period. This consideration allows for a simple intuitive approximation of the critical excitation. The amplitudes of the positive and negative pulses are obtained in closed forms using energy balance. Numerical investigations show that the critical excitations are well approximated by the suboptimal excitations.     

Emission of trace toxic metals during pulverized fuel combustion of Czech coals

A study of the trace elements emission (As, Se, Cd, Co, Cr, Cu, Zn, Hg, Tl, Pb, Ni, Sn, Sb, V, Mn and Fe) from pulverized coal combustion has been made at six heating and power stations situated in the Czech Republic. The amount of chlorine in coal has considerable influence on volatilization of some elements such as Zn, Cu, Pb, Hg and Tl, which is explained by the formation of thermodynamically stable compounds of these elements with chlorine. Generally, the affinities for Cl follows the order Tl > Cu > Zn > Pb > Co > Mn > Sn > Hg. The experimental data indicates enrichment of some of the trace toxic elements in the emissions (Cu, Zn, As, Se, Cd, Sn, Sb, Hg and Pb) and good agreement was obtained by thermodynamic equilibrium calculations with a few exceptions. In the case of Fe, Mn, Co, Cr and Sn calculated values are overestimated in the bottom ash and there are zero predicted amounts of these elements in the fly ash. In comparison, the results from experiments show up to 80% of these elements retained in fly ash. This implies that there exist additional steps leading to the enrichment by Fe, Mn, Co, Cr and Sn of small particles. Such mechanisms could include the ejection during devolatilization of small inorganic particles from the coal of bottom ash particles, or disintegration of the char containing these metals to small particles of fly ash. On the other hand, there are slightly overestimated or similar values of relative enrichment factors for As, V, Cu, Cd, Sb, Tl and Pb in the fly ashes and zero predicted values for bottom ashes. Our experimental results show about 5% or less of these elements are retained in bottom ashes, so they probably remain in the bottom ash inside unburned parts of coal. Copyright © 2003 John Wiley & Sons, Ltd.     

油气集输系统新增产能建设拓扑优化方法研究

在油气集输新增产能建设中,为充分利用已建管网系统的处理能力,达到降低投资,提高经济效益的目的,进行了油气集输新增产能建设布局优化方法的研究。针对新建集输管网为树状结构的情况,建立了油气集输系统新增产能建设拓扑优化的数学模型,讨论了计算复杂性问题。根据模型的特点,将问题分解为拓扑级优化和几何级优化两个子问题,并通过它们之间的迭代进行求解。实例计算表明,所建立的数学模型正确,求解方法可行,能用于工程实际设计。     

EXPERIMENTAL STUDIES AND NUMERICAL CALCULATION ON TURBULENT BOUNDARY LAYER OF WATER FLOW ALONG CURVED SURFACE

This paper will introduce experimental studies and numerical calculation onturbulent boundary layer of water flow along curved surface in our country in recent years.Onthe basis of the experimental studies,the effects of curvature and roughness on velocitydistribution and pressure distribution and the change of turbulent flow boundary layer onoverflow bucket concave surface is discussed.We proposed the empirical formula of velocity,pressure and the change of turbulent flow boundary layer on outlet bucket concave.According tothe momentum principle,we have deduced the momentum integral equation full water depthboundary layer and using the element as control unit inside the boundary layer on concavesurface of bucket.Combining with continuity equation,we have computed the boundary layerdevelopment on the bucket of a spillway.Compared with the field experimental data,thecalculation results are available.Under polar coordinates,a mathematical model for simulatingtime-averaged flow characteristics in concave surface of bucket is established.The turbulent flowfield on concave surface of bucket is calculated by SIMPLE method and this mathematicalmodel.The flow velocity field,pressure field,distribution of turbulent kinetic energy,distribution of turbulent energy dissipating rate and distribution of shear stress are available.Thecalculation value is consistent with measured test data.     

新型复合弹簧的研究

提出一种金属圆锥弹簧与橡胶圆锥弹簧复合而成的弹簧．分析表明：它可以应用于弹性耦合激励振动筛和座式直线振动筛。     

微波宽频带功率负载的研究

介绍了５００Ｗ宽频带功率负载的设计及实验结果，并将研究成果扩展到１０～１０００Ｗ范围。负载主要技术指标：输入阻抗５０Ω，频带宽度０～１０００ＭＨｚ，电压驻波比≤１．１．表面最高温升△ｔ≤１００℃。     

一个矢量形式的双圆弧插值算法

本文在分析数控插补最常用的双圆弧插值算法特点的基础上，将以局部坐标系中的三角运算为核心的传统双圆弧插值算法，改造成为以整体坐标系中的线性运算为核心的矢量形式的双圆弧插值算法，从而减少了计算的复杂性和程序的复杂性，提高了效率和可靠性。     

盘锦地区电力负荷的季节性分析

本文从盘锦地区１９８７－１９９３年电力负荷的原始资料入手，运用移动平均并加以改良的方法，从具有季节性变化的电力负荷系列中，分离出季节性分量，提示了电力负荷发展变化的规律。文中分析了盘锦地区七年间电力负荷发展的自身特点，指出其循环变化的转折点，给出了未来近期负荷变化的趋势，为电力行业制定规划和组织生产提供了依据，对供电企业合理安排生产计划、适应市场经济带来启示。