增材制造技术粉床的数值模拟与分析

选择性激光烧结等增材制造工艺中粉床特性对成型工艺有重要影响。针对颗粒粒径分布类型和层厚等对粉床特性有影响的问题,通过分析增材制造技术中粉床填充过程,提出了一种基于离散元法的增材制造粉床的数值模拟分析方法,分析论述了不同粒径分布和不同层厚对粉床填充性能的影响。结果表明：单一粒径粉床和粒径高斯分布粉床的填充密度和平均配位系数均随着层厚的增大而增大,最后趋于稳定;单一粒径粉床和粒径高斯分布粉床的填充密度和平均配位系数在层厚为80μm和400μm时均大致相等,在其它层厚时,粒径高斯分布粉床的填充密度高于单一粒径粉床的填充密度,且差值随着层厚的增大先增大后减小;单一粒径粉床的平均配位系数高于粒径高斯分布粉床的平均配位系数,且差值随着层厚的增大先增大后减小。这些研究结果可为增材制造粉床颗粒粒径分布类型和层厚选取提供参考依据。     

结构性贸易融资助力江苏机电产品出口的运用

结构性贸易融资是一种融合传统国际贸易融资方式和现代国际贸易融资方式的组合融资,更适合流程复杂、金额大的资本性货物如机电产品的出口融资.由于融资难等问题,江苏机电产品出口业绩近几年频频走低.根据基础贸易融资方式,以贸易流程为基础,构建适合机电产品出口的短期和中长期结构性贸易融资模式,能较好地解决融资难题,助力江苏机电产品的出口.     

P2P网络中基于RDF/S的数据库语义查询系统设计*

提出一种P2P网络环境下基于RDF/S 数据模型的数据库语义查询原型系统,可以有效地对各种基于ODBC的异构数据源进行语义查询。首先数据内容经RDF/S描述成RDF/S schema片断形式,然后对片段进行编码,再把编码杂凑到DHT中,就可以使用Chord协议定位目标节点。     

旋转扫描结构光的三维检测系统及其标定

针对传统平移扫描检测系统的缺陷,提出了一种基于旋转扫描线结构光的三维检测与重构系统及对应的系统参数标定方法,建立了点云数据获取模型。被测物体通过旋转实现与线结构光间的相对运动,得到被测物体的外表面二维图像。系统标定获得图像坐标与世界坐标间的转换关系,得到被测物体的三维坐标信息及数字模型。由实验可知,相机的标定精度为0.2 mm,原理样机进行物体测量的精度为0.1 mm。实验证明该系统检测精度高,具有可行性。     

MICROSTRUCTURE TRANSFORMATION IN THE WELDING HEAT AFFECTED ZONE OF 800MPa GRADE ULTRA FINE STRUCTURED STEEL

The transformation behavior and microstructure development in the heat affected zone (HAZ) of 800MPa grade ultra fine structured steel was investigated. It was found that the HAZ has intermediate temperature transformation characteristics in a wide range of cooling rates, with the bainite sheaves consisting of bainite ferrite plates without carbide precipitation and retained austenite in the .fast cooling regime. At relatively high cooling rates, which corresponded to low heat inputs, the hardness o.f the simulated HAZ was above that of the base metal. When the cooling rate was below 9℃/s, the welding HAZ would have an obvious softening. The analysis of transformation rates in continuous cooling processes was completed by numerical differential method. The result indicated that the microstructure transformation rate o.f the HAZ in 800MPa grade ultra fine structured steel changed sharply to slow speeds when the cooling time t8/5 is longer than 7s.     

Flow of gas-liquid-solid system and its application in packed flotation column

A packed flotation column, which is packed with multiple board ripple packings, was described. Based on comprehensive steady state models, chemical reactor developed previously in chemical engineering subjects, have been extended to packed flotation column for mineral separation. The experimental results verify that tarts in series model is better than axially-dispersed plug flow model to describe flow pattern in the collection zone of column by RTD (residence time distribution), and the error of experimental data and calculated data of both models are 0. 07 % - 0. 1% and 0. 18 % - 0.45 % respectively. And, RTD of gas phase was also considered, results also show that gas in the whole column appears plug flow. The cleaning process through adding wash water in froth zone of column was described, and the effect of superficial air vdodty and superficial wash water vdocity on the cleaning action of froth zone were discussed. Flotation experiment for single column was conducted for phosphate ores. The recovery for P2Os was 85.8%, and the grade was 26.8%.     

Mechanically activated disproportionation of NdFeB alloy by ball milling in hydrogen

1　INTRODUCTIONSincethediscoveryoftheuniaxialNd2 Fe14 Bcompoundin 1983[1,2 ] ,theNdFeBalloyshavebeenwidelyusedforpermanentmagnetapplicationsowingtotheirexcellentmagneticproperties ,suchashighcoercivity ,high energy products[3,4 ] .Intheserareearthpermanentmagnets ,afurtherexcitingrecentdevelopmentisthesuggestionofnano compositeex changemagnetscombiningthelargecoercivitiesinhardmagnetswithlargeinductionsfoundinsoftertransitionmetalmagnets[5,6 ] .Indeed ,thenano com positemagnetshavebeent…     

On hypercube packings,blocking sets and a covering problem

Consider sets S of hypercubes of side 2 in the discrete n-dimensional torus of side 4 with the property that every possible hypercube of side 2 has a nonempty intersection with some hypercube in S. The problem of minimizing the size of S is studied in two settings, depending on whether intersections between hypercubes in S are allowed or not. If intersections are not allowed, then one is asking for the smallest size of a non-extensible packing S  ; this size is denoted by f(n)$f(n)$. If intersections are allowed, then the structure S is called a blocking set. The smallest size of a blocking set S   is denoted by h(n)$h(n)$. By computer-aided techniques, it is shown that f(5)=12$f(5)=12$, f(6)=16$f(6)=16$, h(6)=15$h(6)=15$ and h(7)≤23$h(7)\le 23$. Also, non-extensible packings as well as blocking sets of certain small sizes are classified for n≤6$n\le 6$. There is a direct connection between these problems and a covering problem originating from the football pools.     

钢丝绳激光在线测长方法研究

针对目前传统接触测长固有的打滑、磨损等问题,提出一种钢丝绳激光在线测长方法,利用激光成像技术、视觉检测技术以及数字图像处理技术对线结构激光器投射到钢绳表面所形成的图像纹理进行分析和处理,间接获得运动钢绳在线实时长度.实验证实,此方法能有效解决打滑、磨损等问题,同时还具备精度高的特点.     

云平台下的装备保障管理系统结构化数据查询

首先针对我军装备保障管理系统关系数据库在海量数据查询以及分析处理方面的不足,在对系统数据资源分析的基础上提出并实现了基于Hadoop云平台结构化数据查询策略,通过Sqoop工具将数据库中的数据导入到HDFS中,并利用Hive进行数据分析.然后通过实验证明此方法克服了海量数据在单机环境中查询效率低下的缺点,具有较高的实用价值.