改进的Sol-gel法制备Ba0.6 Sr0.4 TiO3厚膜

采用Sol-gel法在Pt/Ti/SiO2/Si和Al2O3基片上制备厚度为2～14μm的Ba0.6Sr0.4TiO3(BST)铁电厚膜材料.经高能球磨细化和表面改性后的BST陶瓷纳米粉体分散到BST溶胶中,通过甩胶法,形成0-3型BST厚膜材料.XRD图谱显示,BST呈现纯钙钛矿相结构;SEM照片显示,BST厚膜均匀致密、无裂纹;介电性能测试结果表明,当测试频率为1kHz,温度为25℃时,介电常数为620,介电损耗为0.6.     

确定厚壁圆筒初始屈服压力的一种实验方法

基于厚壁圆筒的弹性失效准则所确定的圆筒的初始屈服压力与材料的屈服极限的关系，设计了一种测定厚壁圆筒初始屈服压力的实验方法，并测得了一组实验数据。通过对该实验数据的分析得到了圆筒的初始屈服压力。该实验值与理论值误差较小，表明了该实验方法具有较好的可靠性。     

Thermophysical Properties of Porous Sandstones: Measurements and Comparative Study of Some Representative Thermal Conductivity Models

The thermal conductivity and thermal diffusivity of porous consolidated sandstones have been measured simultaneously by the transient-plane source (TPS) technique in the temperature range from 280 to 330 K at ambient pressure using air as the saturant. The porosity and density parameters are measured using standard American Society for Testing and Materials (ASTM) methods at 307 ± 1 K. Data are presented for five types of samples ranging in porosity from 8 to 17 vol. %, taken from various positions above the baseline. The thermal conductivity and constituents of the minerals vary with porosity as well as with the position of the sample from the baseline. The thermal conductivity data are discussed in the framework of simple mixing laws and empirical models. Simple correlations between the effective density and porosity, and between the effective thermal conductivity and porosity, are also established     

压电谐振式声发射接收传感器设计

介绍了声发射接收传感器的工作原理,在对厚度振动模式进行分析的基础上,给出了利用厚度振动模式设计谐振式声发射接收传感器的基本方法,给出了敏感单元在不同参数设计和工艺条件下的频率-电导特性曲线和测试结果。     

优化换向器冷锻模冲头锥角的显式目标函数

应用金属塑性应力、应变原理和数值分析中最小二乘法推导出了优化冲头端部锥角的目标函数凹模的最大工作应力和材料利用率的具体表达式，建立了具有显式目标函数的具体数学模型，能更深入分析冲头形状对模具结构及成形工艺的影响。     

高强混凝土超筋受扭构件有效壁厚的研究

通过理论分析和实验验证，对高强混凝土超筋受扭构件有效壁厚计算提出了具体的确定方法，供有关人员设计时参考。     

多支承矩形厚板固有横振频率的特征方程

采用Ｌａｐｌａｃｅ变换研究了两对边简支多支承矩形厚板的固有横振，并给出了其振型函数及频率的特征方程。     

自动扣压联网法及其应用

主要论述自动扣压联网法的原理及其铺联网机构与液压支架配套使用来实现厚煤层分层开采金属网假顶的自动铺设和联结。     

浅谈宝钢宽厚板工程磨辊间设计的有关问题

介绍宝钢宽厚板轧机工程概况及磨辊间主要特点，阐述了宽厚板轧机磨辊间设计中应注意的问题。     

"3-Section" Technology of Full-Dimension Mining in Flat Thick-Seam

To raise coal recovery ratio and solve the key problem of full-dimension mining, a new "3-section" technology of full-dimension mining is put forward in flat thick-seam according to the theory and mining practice. This technology is proved to be rational and feasible in rodway layout system of stagger arrangement.