Effect of Thickness on the Structure and Tribological Properties of MoSx Coating

MoSx coatings were prepared by bipolar-pulse DC unbalanced magnetron-sputtering system with the variation of coating thickness at different Ar pressures.The composition and surface morphology were determined by using energy dispersive X-ray and scanning electron microscopy;the structural characterization was analyzed by X-ray diffraction.The friction and wear properties were investigated by fretting tests in air with less than 10% and 50% relative humidity.At 0.40 Pa pressure,(002) basal plane orientation was formed throughout the coatings.At 0.88 Pa and 1.60 Pa pressures,(002) basal plane orientation was only noticed in the first stage of coating growth(around 0.20 μm in thickness), and then edge orientations with their basal planes perpendicular to the surface would be evolved in the coatings.Humidity has a minor influence on the coatings that have(002) basal plane orientation,whereas the tribological properties of MoSx coatings with edge orientations are greatly affected by humidity.The mechanisms of coating growth and friction and wear processes are discussed.     

低价硫化铝法从氧化铝直接炭还原制铝的动力学研究

低价硫化铝法从氧化铝直接炭还原制铝的动力学过程极为复杂,过程的前期受界面化学反应控制,过程后期受扩散过程控制,并求得不同时期的活化能,反应前期:E1=63.81 kJ/mol(6.67 Pa)、E2=50.82 kJ/mol(66.7 Pa)、E3=54.72 kJ/mol(666.7 Pa)、E4=39.61 kJ/mol(1333 Pa);反应后期:E*1=112.90 kJ/mol(6.67 Pa)、E*2=89.92 kJ/mol(66.7 Pa)、E*3=97.32 kJ/mol(666.7 Pa)、E*4=51.83 kJ/mol(1333 Pa).从动力学的角度提出了反应的较佳条件.温度、真空度的提高一方面可增大反应速率,但另一方面却加大了硫化铝的挥发,仅从增大速率而言,温度应大于1100 ℃,真空度应优于1333 Pa为宜.     

CMOS图像传感器的最新进展及其应用 (续)

主要介绍CMOS图像传感器的发展现状,最新进展、市场前景及其在医学上的应用。     

有机介质中合成二硫化钛

本文研究了硫化氢与四氯化钛在某些有机介质中的反应，并提出了一个合成二硫化钛的新方法。该法是将干燥的硫化氢通入沸腾的四氯化铁的α－氯代萘溶液中，使硫化氢和四氯化钛发生复分解反应而生成二硫化钛。方法简便易行。Ｘ－射线物相鉴定及化学分析结果表明，产物为单一物相的、符合化学计量的二硫化钛。