Forced Vertical Vibration of Circular Plate in Multilayered Poroelastic Medium

This paper considers the vertical vibrations of an elastic circular plate in a multilayered poroelastic half space. The plate is subjected to axisymmetric time–harmonic vertical loading and its response is governed by the classical thin-plate theory. The contact surface between the plate and the multilayered half space is assumed to be smooth and either fully permeable or impermeable. The half space under consideration consists of a number of layers with different thicknesses and material properties and is governed by Biot’s poroelastodynamic theory. The vertical displacement of the plate is represented by an admissible function containing a set of generalized coordinates. Contact stress and pore pressure jump are established in terms of generalized coordinates through the solution of flexibility equations based on the influence functions corresponding to vertical and pore pressure loading. Solutions for generalized coordinates are obtained by establishing the equation of motion of the plate through the application of Lagrange’s equations of motion. Selected numerical results are presented to portray the influence of various parameters on dynamic interaction between an elastic plate and a multilayered poroelastic half space.     

高镁边缘磷矿制取阻燃剂氢氧化镁的工艺

为解决大量的高镁低磷边缘磷矿废渣堆存对环境的影响,开发了以其为原料制取阻燃剂氢氧化镁工艺.该工艺主要包括酸解磷矿和镁沉淀过程,重点讨论了沉淀氢氧化镁过程中时间、温度、氨镁摩尔比n(NH3/MgO)等多种因素的影响,得到的最佳工艺条件是:反应温度65℃,反应时间80min,n(NH3/MgO)为5∶ 1,镁的沉淀效率为80%.     

Note on ‘Construction of Double Sampling s‐Control Charts for Agile Manufacturing’

He and Grigoryan (Quality and Reliability Engineering International 2002; 18 :343–355) formulated the design of a double‐sampling (DS) s control chart as an optimization problem and solved it with a genetic algorithm. They concluded that the DS s control charts can be a more economically preferable alternative in detecting small shifts than traditional s control charts. We explain that, since they only considered the average sample size when the process is in control, their conclusion is questionable. Copyright © 2006 John Wiley & Sons, Ltd.     

320×240 Pixels CMOS Digital Image Sensor with Wide Dynamic Range

A 320×240 CMOS image sensor is demonstrated,which is implemented by a standard 0.6 μm 2P2M CMOS process.For reducing the chip area,each 2×2-pixel block shares a sample/hold circuit,analog-to-digital converter and 1-b memory.The 2×2 pixel pitch has an area of 40 μm×40 μm and the fill factor is about 16%.While operating at a low frame rate,the sensor dissipates a very low power by power-management circuit making pixel-level comparators in an idle state.A digital correlated double sampling,which eliminates fixed pattern noise,improves SNR of the sensor, and multiple sampling operations make the sensor have a wide dynamic range.     

连轧机用人字轮齿轴断裂失效分析

用宏观断口分析、化学检验、力学性能测定、低倍检查、金相组织及夹杂物评定鉴别、受力分析及强度寿命定量估算的方法，对人字轮被动齿轴端断裂失效原因进行分析，并提出改进措施。     

二滩拱坝混凝土设计及试验研究

二滩水电站混凝土双曲拱坝，坝高２４０ｍ，是我国已建和在建的第一高坝。根据拱坝应力状况，仿真试验试件尺寸，二向、三向轴受力状况混凝土的力学变形特性，建立了相应的方程式。二滩拱坝混凝土强度设计龄期为１８０ｄ，抗渗标号不小于Ｓ１２，抗冻标号选用Ｄ２００，胶材用量不超过２００ｋｇ／ｍ３，也不少于１７０ｋｇ／ｍ３，粉煤灰掺量控制在３０％以内，Ａ、Ｂ、Ｃ三区混凝土强度分别采用３５、３０、２５ＭＰａ。经试验和复核，大坝混凝土强度的安全系数是完全足够的。     

强折射轴对称流场的干涉再现方法

利用光学方法测量气体状态参数的关键在于确定气体折射率场的变化。光线通过稳定的非均匀折射率场时发生偏折，并且在强折射对称场中会产生交叉，使得条纹位移量的判读困难。本文首先分析了光线在轴对称折射率场中的偏折效应，在此基础上，给出了一种利用成像透镜对强折射轴对称场中折射率的干涉再现方法。该方法与其它方法相比较能够精确地确定折射率ｎ（ｒ）的值。     

Catalytic oxidation of sulfide ions over nickel hydroxides

The catalytic sulfide ion oxidation by oxygen to elemental sulfur over β-Ni(OH)₂ and LiNiO₂ has been studied. As a result of experimental investigation performed, a reaction mechanism is suggested which involves heterogeneous and homogeneous processes. Dioxygen activation in the heterogeneous process proceeds via a redox Ni²⁺ ↔ Ni³⁺ transition and participation of OH⁻ groups. The active HO⁻₂ species thus formed carries on the reaction in homogeneous phase. Nickel hydroxides are promising catalysts for practical application.     

Electrochemical Aspects of Electroosmotic Dewatering of Clay Suspensions

An attempt is made to elucidate the electrochemical aspects of the electroosmotic dewatering (EOD) of clays as reported in some recent work, especially that on interrupted DC power electroosmotic dewatering published by Rabie, Mujumdar and Weber (2). These authors showed that the dewatering by EOD stops after the DC power has been on for several minutes or hours; on interruption of their power and on short-circuiting of the electrodes, conditions can be created again for some further dewatering by DC power EOD. This discovery, of Rabie et al. is interpreted as a fuel cell effect and it is shown that it affords clues to several other electrochemical strategies for the possible enhancement of the efficiency of the EOD by DC power.

Further, the open circuit potentials observed by Rabie et al. (2) on the interruption of DC power are given an electrochemical interpretation which leads to quantitative estimates in agreement with the experimental values.