纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

有机电沉积涂料的新动向

阴极电沉积涂料是 2 0世纪 70年代以来发展起来的一种新的涂装方法 ,具有挥发性有机物 (VOCs)和有害空气污染物(HAPs)含量低、防蚀能力强、漆膜质量好、涂料利用率高、适合涂装结构复杂的构件和设备等特点。介绍了近年来阴极电沉积涂料研发的新动向。它们主要集中在有机双层电涂和高分子 聚电解质 /低聚物电解质复合物多层电涂体系 ,这些新的电涂体系在涂料的稳定性以及涂层的物理化学性质和力学性能方面具有明显的改进。     

Low-resistance polysilicon process in contact application for high density devices

For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H₂-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin R_c, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.     

EXPERIMENTAL RESEARCH ON RADIATION FROM DOUBLE CYLINDRICAL STRUCTURES

1. INTRODUCTION Induced by unbalanced mechanical forces and moments, underwater structures vibrate and radiate The main form of underwater structures, such a submarine, is reinforced double cylindrical structure immersed in water, with fluid media filled between th double cylindrical shells. In essence, this is a coupling problem between fluid and structure. Multipl methods have been used to estimate radiation leve from underwater structures[1-9]. Musha[10] and Chertock[11] estimate the …     

NUMERICAL STUDY ON SORET-EFFECT AND DUFOUR-EFFECT FOR DOUBLE-DIFFUSIVE NATURAL CONVECTION IN POROUS ENCLOSURE

The influences of Soret effect and Dufour effect on the natural convection and heat and mass transfer for a porous enclosure were investigated by means of the penalty finite element method. Numerical results indicate that the Soret and Dufour effects have significant influences on heat and mass transfer in the presence of large temperature gradient and concentration gradient.     

C60高性能预拌混凝土的生产及应用

介绍了C60高性能预拌混凝土的研制及生产应用的过程与方法 ,对材料的性能、搅拌工艺进行了深入分析 ,为生产高强高性能混凝土提供了详细的思路     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

Mechanistic investigation into the electrolytic formation of iron from iron(III) oxide in molten sodium hydroxide

Iron(III) oxide tablets were electrolytically reduced to iron in molten sodium hydroxide at 530 °C and recovered to produce iron with 2 wt.% oxygen suitable for re-melting. The cell was operated at 1.7 V and an inert nickel anode was used. The thermodynamics and mechanism of the process was also investigated. By controlling the activity of sodium oxide in the melt, the cell could be operated below the decomposition voltage of the electrolyte with the net sequence of events being the ionization of oxygen, its subsequent transport to the anode and discharge leaving behind iron at the cathode. A reduction time of 1 h was achieved for a 1 g oxide tablet (close to the theoretical reduction time predicted by Faraday’s laws) at a current density of 520 mA cm⁻² with iron phase yields of ∼90 wt.%. The energy consumption was 2.8 kWh kg⁻¹.     

GJ5×2双槽剥片机及其在高岭土剥片中的应用

GJ5×2大型双槽剥片机是国内超细物料加工中最新出现的超细磨/剥片设备,也是目前国内这一领域内最大规格的设备,已成功应用于煤系硬质高岭土剥片中,单机能力可达1.5～2.0t/h,产品细度可达小于2μm颗粒占85%～90%。     

Performance evaluation on a double‐layered satellite network

How to evaluate the performance of satellite networks is a prerequisite to the construction of satellite networks, and is also one of challenges in the researches on satellite networks. In this paper, generalized stochastic Petri net (GSPN) models are presented to carry out the performance analysis of a double‐layered satellite network. Firstly, the GSPN model of a double‐layered satellite network is simplified by proper analysis. Then, two sets of experiments are conducted to analyse the performance of the satellite networks, and show that the double‐layered satellite network outperforms single‐layered ones on the heavy traffic load. Finally, the feasibility and effectiveness of the proposed approach is verified by simulation experiments. Copyright © 2005 John Wiley & Sons, Ltd.