Development of damage in a 2D woven C/SiC composite under mechanical loading: I. Mechanical characterization

An investigation has been undertaken to determine the damage mechanisms and the associated mechanical response of a 2D reinforced composite of carbon fibers in an SiC CVI-processed matrix subjected to uniaxial tensile and compressive loadings at room temperature. Under tension loading, an extended non-linear stress/strain response was evidenced and related to a multi-stage development of damage involving transverse matrix microcracking, bundle/matrix and inter-bundle debonding as well as thermal residual stress release. This tensile behavior proved to be damageable-elastic with respect to a fictitious thermalstress-free origin of the stress/strain axis lying in the compression domain. In compression, after an initial stage involving closure of the thermal microcracks present from processing, the composite displayed a linear-elastic behavior until failure. The extent of damage over the material was characterized quantitatively at the microscale by the decrease of the average transverse microcrack spacing and at the macroscale by the decrease of both the longitudinal Young's modulus and the in-plane Poisson's ratio.     

Preparation of ultra fine nickel-copper bimetallic powder for BME-MLCC

The preparation of ultra fine nickel-copper bimetallic powder with two-stage chemical reduction method was investigated. Reductive sugar and hydrazine hydrate were employed as reducing agent in different reductive stage, respectively. Reaction of CuSO₄·5H₂O with reductive sugar at 70 °C gives cuprous oxide and copper particles, then as-prepared mixture and nickelous hydroxide were reduced by hydrazine hydrate, and nickel-copper powder having excellent dispersibility was prepared. Influences of nickel added on composition and dispersibility of powder were studied. TG/DTG/DTA of nickel-copper powder, which is stable in room temperature, were discussed with thermal analyzer. Relation of nickel content to oxidation temperature was investigated. Ni-Cu bimetallic powder particles have a fully coated structure when nickel content is up to 30%. As-prepared nickel-copper powder was applied in base metal electrode-multilayer ceramic capacitor (BME-MLCC). The end termination has high adhesion force, fairly good densification, low resistivity, excellent solderibility behavior and resistance behavior to soldering.     

Preparations of nanosized TiO2 in reverse microemulsion and their photocatalytic activity

Nanosized titania sol has been produced by the controlled hydrolysis of titanium tetraisopropoxide (TTIP) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. The physical properties, such as surface area, crystallite size and crystallinity according to R and W₀ ratio, have been investigated by TEM, XRD, BET, FT–IR, TGA and DTA. In addition, the photocatalytic decomposition of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. It is shown that the anatase structure appears in the 300–600 °C calcination temperature range and the transformation of anatase into rutile starts above 700 °C. The crystallite size increases with increasing R and W₀ ratio but W₀ ratio shows a stronger effect on the crystallite size than R ratio. In the photocatalytic decomposition of p-nitrophenol, the photocatalytic activity is mainly determined by the crystallinity of titania. In addition, the titania calcined at 500 °C shows the highest activity on the photocatalytic decomposition of p-nitrophenol() and the pure anatase structure.     

货运调车场减速顶噪声及治理的探讨

铁路货物运输枢纽的调车场中，驼峰调车是主要的调车手段，为提高生产效率和确保安全，沿驼峰下滑道布置的减速器（减速闸，减速顶）的噪声是调车场噪声的主要声源之一，本文通过对昆明东站铁路降噪工程的观测试验项目，探讨了减速顶噪声的特性及治理措施。     

Use of chemical variation and predation as plant defenses byEncelia farinosa against a specialist herbivore

Larvae of the monophagous herbivore,Trirhabda geminata, selectively eat particular plants and plant parts of its natural host,Encelia farinosa. Measurements of leaf damage and larval positions on branches through time support this observation. Time-lapse movie photography revealed that larvae are sufficiently mobile to search most of a plant in a 48-hr period and that aggregations were the result of larval activity and not directly the result of oviposition. Experiments withT. geminata larvae on artificial diets containing a range of natural concentrations of chemical extracts fromE. farinosa leaves showed that the larvae grew significantly slower and had a lower overall survivorship at the high concentration. Combining the results of all choice tests, larvae appeared unable to distinguish between high- and low-concentration agar diets. Considered individually, larval preferences for natural production concentrations changed as the season progressed. Early-season larvae preferred low-concentration leaves, while late-season larvae preferred high-concentrations. Measurements of chemical and nitrogen content of leaves selected by larvae in the field confirmed this pattern. Percent parasitism in field-collected larvae increased with season as the larval population decreased. This combination of slowed growth and increasing parasitism and predation is a putative defense strategy ofEncelia farinosa to prevent adaptation by a specialist herbivore to the total range of compounds elaborated.     

OPS和OPC系列稠油乳化降黏剂的研制

以工业品烷基酚聚氧乙烯醚OP-n（n=4,6,8,10,15）为起始原料,合成了烷基酚聚氧乙烯醚乙酸盐OPC-n和磺酸盐OPS-n两个系列的阴-非离子表面活性剂。以酸值和黏度不同的胜利单家寺和陈庄稠油为实验油样。将OPC-n和OPS-n溶于矿化度5811 mg/kg的胜利标准盐水和NaCl、CaCl2盐水中作为水相,按油、水质量比7∶3在50℃用玻棒搅拌混合,观察是否形成水包油乳状液并测黏度进行确认。在胜利标准盐水溶液中,OPC-n和OPS-n乳化稠油所需的最低质量分数,随稠油、表面活性剂类型及氧乙烯链节数n而变,一般而言,OPC-n系列中的OPC-8和OPS-n系列中的OPS-4乳化稠油的性能最好,该最低质量分数值分别为0.05%或0.025%和0.025%。在NaCl盐水溶液中,OPC-n的该最低质量分数值与稠油和n有关,均随盐含量增加而增大,在盐含量≤15%时,抗盐性最好的OPC-8和OPC-10的该值≤0.05%;OPS-n的抗盐性好于OPC-n。OPC-n的抗钙性良好,钙盐含量为2%时该最低质量分数≤0.1%;OPS-n的抗钙性更好,钙盐含量为2%和3%时该最低质量分数仅为0.025%或0.05%。表6参5。     

A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

微波辐射活性炭脱硫技术的实验研究

针对我国SO2污染的现状进行了微波脱硫实验研究。利用微波装置和活性炭模拟烟气微波诱导催化还原法(ICR-MW)脱硫,通过正交实验确定了影响脱硫效率的主要因素,在此基础上通过条件实验精确确定了脱硫效率与温度的关系,确认550℃时脱硫效率达到最大值。     

碳热还原法制备耐火材料用AlN的研究

AlN在很多方面具有优异的性能,它在耐火材料中的应用日益引起人们的关注.但是,由于高纯AlN价格昂贵,限制了它在耐火材料领域的使用.本文采用碳热还原法研究了不同反应温度、反应时间、铝源及原料粒度对AlN制备结果的影响.结果表明,以400目的Al(OH)3在1500℃下,反应5h,即可制备出低成本、适合耐火材料用AlN.