海水脱硫曝气池钢筋混凝土的腐蚀与防护

以发电厂海水脱硫曝气池内防腐工程为例对钢筋混凝土建筑物的腐蚀机理和腐蚀检测方法作了介绍,并就曝气池表面涂装有机涂层的设计及施工方法作了重点探讨。     

容器设计中搅拌装置的轴向力分析

搅拌装置在化工厂中应用很广，在磷肥、钛白粉装置中（15kt/a)使用较多，仅钛白粉装置中就大约有40－50台，如增稠结晶器，中和槽等，搅拌操作所涉及的因素极为复杂，浆叶形式的选择，从力学的观点来说，迄今研究不够，本文就搅拌装置产生的轴向力问题进行了初步研究。     

基于半周期预测的减摇水舱控制方法及验证

可控被动式减摇水舱能够通过气阀控制空气连通道延长了水舱的固有周期,实现宽频船舶横摇减摇.关阀时刻和关阀时间与船体横摇运动规律相关,由于船体在海浪中的随机运动难以准确计算.小波神经网络的半周期预测控制方法,预测船体横摇的下一个半周期,实时计算控制参数,拓宽减摇频带.通过半实物仿真验证,较传统的方法减摇性能有明显提升.     

骑式摩托车油箱喷涂工艺的改进

面对日益激烈的市场竞争,摩托车油箱外观质量越来越成为影响销售的因素之一。文章介绍了改进工艺后的油箱涂装,该涂装体系提高了油箱外观的丰满度,降低了油箱涂装的生产成本。     

丁二烯罐组扩建时的设计难点

本文对丁二烯罐组扩建时涉及的几个设计难点进行了论述,这些论述在一年多的平稳生产实践中已通过了检验,其对类似工程的设计具有很强的参考价值。     

大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。     

A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).     

水相酶促酯化法拆分dl－薄荷醇的连续操作

对影响脂肪酶活性、稳定性和对映选择性的因素，如有机溶剂和反应温度等首先进行了优化。其次，使用悬浮于环已烷的粉末状游离脂肪酶（ＣａｎｄｉｄａｃｙｌｉｎｄｒａｃｅａｌｉｐａｓｅＯＦ３６０）作生物催化剂，成功地构建了一个高效的非水相游离酶连续搅拌釜反应器。当使用高度反应性的丙酸酐作为薄荷醇的酰基给体，进行连续的酶促对映选择性酯化反应时，醇的转化率在两周内可保持４０％以上，所生成酯的光学纯度超过９５％ｅ．ｅ。但是，当使用相应的游离丙酸（而不是酸酐）作酰基给体时，薄荷醇的转化率在连续操作开始后迅速下降，表明使用酸酐时的生产力要比使用游离酸时高。最后，对底物溶液的浓度和流速进行了进一步优化；同时对反应器系统的含水量进行了监测，并通过对酸酐料液的浓度或流速进行微调的方法，有效地将有机溶液相的水分浓度控制在一定的范围（２～４ｍｍｏｌ／Ｌ）之内，结果，ｄｌ－薄荷醇对映选择性连续酯化反应非常稳定地运行了两个月之久（转化率４７～３５％，光学纯度９５～９８％ｅ．ｅ．），酶反应器的半衰期超过２００天。     

Numerical Study of Solid-Liquid Two-Phase Flow in Stirred Tanks with Rushton Impeller (Ⅰ) Formulation and Simulation of Flow Field

Three-dimensional solid-liquid flow is mathematically formulated by means of the "two-fluid" approach and the two-phase k-ε-Ap turbulence model. The turbulent fluctuation correlations appearing in the Reynolds time averaged governing equations are fully incorporated. The solid-liquid flow field and solid concentration distribution in baffled stirred tanks with a standard Rushton impeller are numerically simulated using an improved "inner-outer" iterative procedure. The flow pattern is identified via the velocity vector plots and a recirculation loop with higher solid concentration is observed in the central vicinity beneath the impeller. Comparison of