脂肪族聚碳酸酯聚氨酯的合成研究进展

脂肪族聚碳酸酯聚氨酯是一种新型的聚氨酯材料，它与传统聚氨酯材料相比有许多独特的性质，有关其合成与应用方面的研究受到广泛关注。综述了国内外有关该类聚氨酯合成方面的最新研究进展，并对其发展进行了展望。     

聚合条件对合成聚1-丁烯热塑性弹性体的影响

以1-丁烯(B t)为原料,负载钛(简称Ti)-三异丁基铝(简称Al)为催化体系,用本体聚合法合成了聚1-丁烯(PBt)热塑性弹性体(TPE)。考察了聚合条件对PBt TPE的影响,并用差示扫描量热法对聚合物进行了分析。结果表明,随着氢气压力的升高,单体转化率、催化效率呈下降趋势;随着Al/Ti(摩尔比)的增加,转化率和催化效率先升高后降低;随着Ti/Bt(摩尔比)的增加,转化率和催化效率逐渐升高;随着聚合温度的升高,转化率和催化效率先升高后降低;在氢气压力为0.2 MPa、Al/Ti为300、Ti/Bt为2×10-5、反应温度为30℃的聚合条件下,合成出转化率为80.0%的PBt TPE。随着氢气压力的升高,聚合物的特性黏数([η])和全同立构质量分数都呈下降趋势,氢气压力能较好地调节聚合物的相对分子质量;随着Al/Ti的增加,[η]逐渐下降,全同立构质量分数变化不明显;随着Ti/Bt的增加,[η]先升高后降低,最后趋于平稳,而全同立构质量分数略有降低后趋于平稳;随着聚合温度的升高,[η]和全同立构质量分数都呈下降趋势。反应温度为40℃时,PBt TPE的结晶度最高,为20.3%。     

Morphology of epoxy resin modified with silyl‐crosslinked urethane elastomer

Silyl‐crosslinked urethane elastomer modifying epoxy resin has drawn much interest. Here the triethoxysilyl‐terminated polycaprolactone elastomer (PCL‐TESi) modifying diglycidylether of bisphenol A epoxy resins (DGEBA) system was chosen, and then the effect of the type of curing agent on the phase structure of the studied epoxy resin system was investigated. The modified systems were obtained with different phase structures by varying the formulations of the curing agent. It was experimentally shown that with the addition of aminosilane (KBE‐9103), the crosslinked density was greatly increased. The cured system also showed from SEM and TEM analysis that addition of KBE‐9103 increased the compatibility between the PCL‐TESi and DGEBA, which made the ductility of the system decrease, but also indicated from TEM that addition of much KBE‐9103 made the reacted silicone particles coagulate each other. The state of phase separation from TEM in the cured system was theoretically explained. These would serve the deeper studies of the mechanism of silyl‐crosslinked urethane elastomer modifying epoxy resin in the future. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 611–619, 2005     

环氧胶粘剂增韧改性研究进展

概述了关于近些年环氧树脂以及环氧树脂胶粘剂增韧改性的研究进展情况,简单地介绍了以无机刚性填料(颗粒)增韧改性环氧胶粘剂的情况,比较详细地叙述了以橡胶弹性体和热塑性树脂增韧改性环氧胶粘剂的一些重要研究情况及相关的增韧机理,指出了国内外之间环氧胶粘剂发展的差距,同时提出了环氧胶粘剂将来的重点和发展趋势。     

透明性聚氨酯弹性体的合成

采用预聚体法以不同的聚合物多元醇、异氰酸酯与1,4-丁二醇合成了透明聚氨酯弹性体,分析了异氰酸酯种类、n(-NCO)/n(-OH)(R值)、聚合物多元醇种类及分子质量、熟化时间和温度等对聚氨酯弹性体透明性、力学性能的影响。结果表明,采用脂肪族的IPD I,R值取1.02,硬段质量分数36.9%,相对分子质量1 000~2000的聚四亚甲基二醇,熟化条件为130℃/3 h时合成的PU弹性体具有较好的透明性和力学性能。     

聚氨酯弹性体/无机纳米粒子复合材料研究进展

纯聚氨酯弹性体（PUE）的耐极性溶剂和耐热性较差，限制了其在某些领域的应用，用纳米无机粒子对其进行改性是提高其性能的一种有效措施。介绍了机械混合法、原位聚合法、插层聚合法几种常用的聚氨酯纳米改性方法及其研究进展。     

弹性条缝筛网用聚氨酯弹性体的研制

采用预聚法常压浇注制备煤矿用聚氨酯筛网，考察了聚醚多元醇、甲苯二异氰酸酯异构体种类、预聚体的NCO质量分数、扩链反应温度、后熟化温度及时间等条件对制筛网用的浇注型聚氨酯弹性体体系操作性能及物理性能的影响。实验表明，采用聚四氢呋喃二醇与聚氧化丙烯二醇的混合二醇(质量比为80：20)，制得的预聚体NCO质量分数控制在4．5％左右；再以MOCA和一种三官能度扩链剂的混合扩链剂进行扩链，制得的浇注型聚氨酯弹性体满足洗煤用筛网的性能要求。     

新型聚醚聚氨酯微孔弹性体的研制

采用新型低不饱和度聚醚多元醇、合适的丰预聚体，合成了可用于鞋底材料的聚醚型聚氨酯微孔弹性体材料。与聚酯型和传统聚醚型鞋料相比，该新型聚醚鞋料在低温性能和耐挠曲性能方面显示出较强的优势。     

热塑性弹性体SBS异型材挤出模具设计

本文通过对异型材截面形状及原材料挤出成型性能分析，设计了正确的口模形状及合理的流线形流道，设计的模具能够生产出符合尺寸精度要求的型材。     

Analysis of the effects of the polymerization route of ethylene‐propylene‐diene rubbers (EPDM) on the properties of polypropylene‐EPDM blends

A comparative study of two ethylene‐propylene‐diene rubbers (EPDM) polymerized by both conventional (Ziegler–Natta catalysts) and new techniques (metallocene catalysts) is presented. For this purpose, thermoplastic elastomers based on isotactic polypropylene (iPP) and EPDM blends at different percentages were prepared and their properties examined. In particular, the processing behavior and mechanical properties are reported. So, the flow properties analyzed by torque value, melt index, and rheological study reveal that the blends containing EPDM synthesized by metallocene catalyst present a smaller viscosity, thus offering better processing behavior. On the other hand, the mechanical properties show that metallocene EPDM rubbers give rise to more elastic materials with a higher deformation at break and resilience as well as a lower compression set. Moreover, the effectiveness of these innovative EPDM rubbers as impact modifiers for PP is demonstrated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 25–37, 2002