聚合物/蒙脱土纳米复合材料的制备与结晶性能

本文综述了制备聚合物 /蒙脱土纳米复合材料的插层方法 ,并对有代表性的结晶性聚合物 /蒙脱土纳米复合材料的结晶性能进行了讨论。蒙脱土的加入对聚合物的结晶有两种作用 ,一方面是对聚合物有异相成核的作用 ,可以提高聚合物的结晶温度和结晶速率 ,降低结晶活化能 ;另一方面是对聚合物结晶生长有阻碍作用 ,导致结晶速率下降 ,结晶活化能提高     

特细砂混凝土的应用及其经济性

通过介绍特细砂混凝土在嘉陵江流域的马回、东西关、桐子壕等水电站建设中的应用情况 ,分析了特细砂混凝土的特性和配合比等特点 ,并闸明了在施工中使用特细砂混凝土的经济效益。     

直接氯化法合成对硝基氯化苄

介绍了以对硝基甲苯和氯气为原料 ,在催化剂存在下合成对硝基氯化苄的方法 ,考察了催化剂种类、反应温度、溶剂配比等因素对反应的影响 ,优化的反应条件为 :对硝基甲苯用量 1 3 7g,对硝基甲苯 /邻二氯苯 (摩尔比 ) =1∶ 0 .6,w (偶氮二异丁腈 ) =0 .6% ,反应时间 3 h,反应温度 1 60℃ ,产物单程收率大于 65 % ;将反应混合物中未反应的原料分离后 ,以无水乙醇为溶剂结晶纯化 ,物料 /溶剂 (摩尔比 ) =1∶ 1 .5时晶体含量在 99.0 %以上 ,结晶收率达 67     

A procedure to prepare cross-sectional samples for TEM

Cross-sectional transmission electron microscopy (XTEM) is an imaging technique particularly suited to the study of layered structures. For integrated electronic devices it has become a common practice to use XTEM to assess the shape and crystallinity of component layers as well as defect structures introduced by processing. A procedure for preparing samples to be viewed by XTEM is described.     

2-环戊基环戊酮香料的制备与应用

以尼龙酸副产物2-亚环戊基环戊酮为原料，液体镍为催化剂，催化加氢制得了2-环戊基环戊酮。经元素分析、GCMS、IR、^1HNMR、^13C NMR检测，认为结构正确，色谱纯度大于99．9％。大鼠口服LD50雄性5381．5mg／kg，雌性5087．5mg／kg。具有留兰香样的香气，可用作食用和日用香料。     

Preparation of Plate Fe_(60)Co_8Zr_(10)Mo_5W_2B_(15) Bulk Amorphous Alloy and Its Fracture Toughness

1Introduction Duwez[1]synthesizedthefoilAu Siamorphousalloyforthefirsttimewithrapidsolidification,whichinitiatedthepreparationofamorphousalloysintheprocessofalloysolidification,andthereaftertheresearchonamorphousal loysdevelopedrapidly.Since1980s,withthec…     

溶胶凝胶法聚合物/无机复合材料的研究与应用

介绍了制备聚合物/无机复合材料的溶胶凝胶原理,基本过程及制备途径,简要阐述了其在光学材料、电子材料、生物材料、涂层材料、纳米材料等领域的研究及应用进展,指出了其进一步研究的发展方向和重点。     

高速逆流色谱(HSCCC)在食品色素制备中的应用

综述了高速逆流色谱在食品色素制备中的应用情况，包括溶剂选择、色素种类等。     

Low temperature synthesis of aluminium titanate by an aqueous sol-gel route

Formation of aluminium titanate (AT) has been achieved at low temperature through sol-gel process using boehmite and titanium hydroxide as precursors by controlling the particle size at nanoscale followed by in-situ peptisation. The formations of AT phase, particle size distributions, sintering and thermal expansion characteristics, and microstructural features have been reported. DTA and XRD analysis have been performed to confirm the formation of AT. A 94% relative density was obtained for aluminium titanate sintered at 1550 °C with controlled grain size in the range of 2-3 μm.     

Preparation and Characterization of Starch-g-PVA/Nano-hydroxyapatite Complex Hydrogel

1Introduction Biodegradablehydrogelshadattractedmuchattentioninrecentyearsduetotheiruniquecombinationofproper ties,suchasbiocompatibility,permeability,hydrophilici ty,andlowcoefficientoffriction[1].Poly(vinylalcohol)(PVA)waswater solubleanddegradable[2].I…