预制挑檐的几种构造作法

挑檐是建筑屋面的一个组成部分。本文介绍了挑檐自重平衡法、屋面板压重平衡法、圈梁压重平衡法、螺栓锚固法等四种预制挑檐的构造 ,在施工过程中应根据现场环境合理选用     

Effects of Load Direction on Performance of Tiliting Pad Journal Bearings

At the previous works for tilting journal pad bearings （TPJBs）, most TPJBs are designed to operate with the load either directly on-pad（LOP） or directly between-pad（LBP）. However, in practice, in some cases, the load direction can change dramatically in operation. With the current requirements for the analysis of dynamic characteristics of the rotor-bearing systems, the effects of the load direction on the bearing performance must be known. So, in this paper, the effects of load direction on the static and dynamic characteristics of TPJBs are obtained with theoretical analysis based on the hydrodynamic lubrication theory, and the influence of load direction on the performance of TPJBs in different structure and operating parameters is also analysed. The results show that the load direction has considerable effects on the static and dynamic characteristics of the TPJBs, especially for the TPJBs that are operating under heavy load and high rotor speed. And for the operating condition that load direction changed rapidly, TPJBs with more pads, smaller length to diameter ratio, larger clearance ratio and smaller perload ratio can reduce the performance fluctuation with the variation of load direction.     

飞机机翼微小创伤修复模具的设计

针对飞机机翼被鸟击后的快速修复提出了简便、经济、精确的精模衬垫微敲修复法,该方法的关键是衬模设计,为此分析了机翼微小创伤的修复原理,提出了三种修复方案,并对比其优缺点,最终以木质叠板为衬模材料,三坐标测量仪为数据获取工具,数控铣床及磨床为加工设备的理念完成机翼衬模的设计,并得到实际应用验证,其结果良好能够满足修复要求。     

宽厚板工程厂房柱肩梁节点设计

介绍了宽厚板工程主轧跨42m柱距、450t位吊车厂房柱肩梁节点计算模型，节点截面设计形式，节点构造及其焊缝形式等，为大柱距、大吨位吊车厂房柱肩梁节点设计提供了参考。     

This month ‘Technik ist alles’

The objective of this prospective cohort study was to evaluate if peak or cumulative musculoskeletal discomfort may predict future low-back, neck or shoulder pain among symptom-free workers. At baseline, discomfort per body region was rated on a 10-point scale six times during a working day. Questionnaires on pain were sent out three times during follow-up. Peak discomfort was defined as a discomfort level of 2 at least once during a day; cumulative discomfort was defined as the sum of discomfort during the day. Reference workers reported a rating of zero at each measurement. Peak discomfort was a predictor of low-back pain (relative risk (RR) 1.79), neck pain (RR 2.56), right or left shoulder pain (RR 1.91 and 1.90). Cumulative discomfort predicted neck pain (RR 2.35), right or left shoulder pain (RR 2.45 and 1.64). These results suggest that both peak and cumulative discomfort could predict future musculoskeletal pain.     

A biomechanical shoulder strain index based on stabilizing demand of shoulder joint

Abstract

Work-related shoulder joint disorders contribute considerably to absenteeism in the workplace. To identify the tasks that are stressful to the shoulder joint, a strain index was formulated based on the concept of concavity compression—a shoulder stabilizing mechanism. The magnitude and direction of the shoulder joint reaction forces were used in formulating the strain index. A two phase experiment was conducted. In Phase 1, participants performed 30 different manual handling tasks. The tasks were categorized into low, medium and high strain tasks based on their strain index values. In Phase 2, out of the 30 tasks, repetitive exertions of three tasks (low, medium and high strain index values) were simulated using three external loads (0.91, 1.81 and 2.72?kg). The muscle activity data recorded from eight shoulder muscles showed that tasks with higher strain index values induced significantly greater activation and muscle fatigue than tasks with lower strain index values.Practitioner Summary: The strain index developed in this study is a conclusive estimation of the concavity compression required for shoulder joint stabilization. It can be used to identify the activities that may contribute to the risks of shoulder disorders. Abbreviation BLS Bureau of the Labor Statistics

     

Risk of musculoskeletal disorders among females and males in repetitive/constrained work

This paper combines epidemiological data on musculoskeletal morbidity in 40 female and 15 male occupational groups (questionnaire data 3720 females, 1241 males, physical examination data 1762 females, 915 males) in order to calculate risk for neck and upper limb disorders in repetitive/constrained vs. varied/mobile work and further to compare prevalence among office, industrial and non-office/non-industrial settings, as well as among jobs within these. Further, the paper aims to compare the risk of musculoskeletal disorders from repetitive/constrained work between females and males. Prevalence ratios (PR) for repetitive/constrained vs. varied/mobile work were in neck/shoulders: 12-month complaints females 1.2, males 1.1, diagnoses at the physical examination 2.3 and 2.3. In elbows/hands PRs for complaints were 1.7 and 1.6, for diagnoses 3.0 and 3.4. Tension neck syndrome, cervicalgia, shoulder tendonitis, acromioclavicular syndrome, medial epicondylitis and carpal tunnel syndrome showed PRs > 2. In neck/shoulders PRs were similar across office, industrial and non-office/non-industrial settings, in elbows/hands, especially among males, somewhat higher in industrial work. There was a heterogeneity within the different settings (estimated by bootstrapping), indicating higher PRs for some groups. As in most studies, musculoskeletal disorders were more prevalent among females than among males. Interestingly, though, the PRs for repetitive/constrained work vs. varied/mobile were for most measures approximately the same for both genders. In conclusion, repetitive/constrained work showed elevated risks when compared to varied/mobile work in all settings. Females and males showed similar risk elevations. This article enables comparison of risk of musculoskeletal disorders among many different occupations in industrial, office and other settings, when using standardised case definitions. It confirms that repetitive/constrained work is harmful not only in industrial but also in office and non-office/non-industrial settings. The reported data can be used for comparison with future studies.     

Effect of geotextile ageing and geomembrane surface roughness on the geomembrane-geotextile interfaces for heap leaching applications

A series of large scale direct shear experiments is used to investigate the effect of the geomembrane (GMB) surface roughness, geotextile (GTX) properties, and GTX ageing, on the GMB-GTX interface shear behaviour. Interfaces involving smooth, coextruded textured, and structured surface GMBs underlying four different nonwoven needle-punched staple fibres (GTXs) with mass per unit areas between 200 and 2400 g/m², and a geocomposite drain (GCD) are examined at normal stresses between 250 and 1000 kPa. The results showed that the interlocking between the GMB and GTX increased with increasing the GMB asperity height and/or decreasing the mass per unit area of the GTX. For the interfaces that involved GTXs preaged prior to the shear box experiments for up to 2 years at 85 °C, it was found that the 2400 g/m² heat bonded two-layered GTX exhibited internal shear failure at low shear displacements. However, all the highly aged single layered GTXs showed an increase in the peak interface friction angles with the increase in their ageing. For these single layered GTX, the results suggest that assessing the interface friction angles using unaged GTXs for the stability analysis is conservative as long as the GTX remains intact in the field.     

加热炉耐热垫块脱落事故分析及预防

分析造成步进梁式加热炉耐热垫块脱落的原因和对生产的影响,提出耐热垫块脱落后的补救措施,并制定防止耐热垫块脱落的预防措施。     

高山无线发射台防雷经验与思考

摘要：论述了高山发射台在防雷方面采取的综合防雷技术措施，光缆在信号防雷方面的优点以及使用避雷针弊大于利。