准连续Ti~(3+):Al_2O_3可调谐激光的研究

本文给出了Ti~(3+):Al_2O_3的准连续可调谐激光的实验结果。采用Nd:YAG内腔倍频532nm的准连续输出作为泵浦源,得到Ti~(3+):Al_2O_3的连续可调谐输出。波长覆盖范围为685nm到821nm。最大输出功率为293mW,斜率效率为20％,在805nm处的窄谱输出功率达240mW,总体转换效举为26％。     

20CrMnTiH钢水口堵塞机理研究与解决措施

研究了转炉生产20CrMnTiH钢时连铸水口堵塞的机理，主要通过精炼造CaO—Al2O3-SiO2-CaF2系渣，保持熔渣良好的流动性和高碱度、低熔点、低氧化铁，提高吸附夹杂能力并针对引起水口堵塞的物质，对钙处理、软吹及进站S含量进行严格的要求，成功解决了水口堵塞问题。     

差热法测定钢样表面氧与体内氧的方法研究

本文利用美国LECO公司生产的TC-436氧氮仪,研究了光谱纯Fe2O3,Al2O3和在大量脱氧铁存在下Al2O3的氧释放曲线,得到了它们的分解功率、分解电流和分解计算温度.成功地分离了钢样的表面氧和体内氧,并对钢样不同表面氧的组成做了初步研究.     

Effects of calcination temperature on phase and microstructure evolution of BaTi4O9 powders

Calcining of the mixture of BaCO₃ and TiO₂ with a ratio 1:4 at different temperatures was carried out to synthesize BaTi₄O₉ powders. Phase evolution of the samples was studied using the differential thermal analysis (DTA) and X-ray diffractometry (XRD). Both techniques confirmed that the formation of BaTi₄O₉ started around 1000 °C. The XRD peaks showed that BaTi₄O₉ was most pronounced at 1250 °C. X-ray line broadening methods were employed to study the variation of particle size and microstrain of the BaTi₄O₉ powders. The Voigt function in a single line and the pseudo-Voigt function in the variance methods were used in our case. We found that both functions resulted in the same trends, i.e., the particle size increased with the temperature with the biggest size of 180 and 160 nm, whilst the microstrain yielded the opposite trend with the lowest values of 6.2 × 10^–3 and 1.1 × 10^–3. The scanning electron microscopy (SEM) study revealed the size of the large particles formed, due to agglomeration, to be about 0.5–1.9 μm. Furthermore, it was shown that irregular shapes of BaTi₄O₉ powders necked to each other appeared at 1000 °C and grew into ellipse and rod shapes at 1250 °C. Electronic Publication     

含氨废水处理方法的探讨

对催化剂厂含氨废水的处理，提出了多种方法，着重分析了A/O生物法、膜分离法和汽提法，比较后确定采用汽提法处理该废水，建成投产达到预期效果。     

长脉冲激光沉积原位生成YBaCuO超导膜

用长脉冲激光(脉冲宽度150μs,波长1.06μm)辐照高温烧结的YBa_2Cu_3O_(7-x)靶,在6Pa的氧气压强下,巳在(100)YSZ单晶衬底上原位生成YBa_2Cu_(?)O_(7-x)超导膜。衬底置于750℃的加热器上,衬底与靶之间的距离5cm,用该法制得的薄膜光亮坚实,正常态呈金属性,零电阻温度为84.7K。用XRD和SEM对薄膜进行了分析研究。     

300脚MSA 10 Gbit/s Transponder模块

分析了开发10Gbit/sTransponder模块的必然性，介绍了10Gbit/sTransponder模块的原理、特点和参数指标。并且用开发出的两只40km300脚10Gbit/sTransponder模块成功地进行了43km的无误码传输试验和测试。     

脉冲激光沉积SrBi2Ta2O9铁电薄膜电容特性研究

用ＰＬＤ方法成功地制备了ＳＢＴ铁电薄膜，并制作成Ｐｔ／ＳＢＴ／Ｐｔ薄膜电容器。ＳＢＴ薄膜的晶面取向以（００８）和（１１５）为主。在５Ｖ电压下，极化反转，并且得到较饱和的电滞回线，剩余极化强度和矫顽电场分别为８４μＣ／ｃｍ２和５７ｋｖ／ｃｍ。ＩＶ特性测试显示两个对称的双稳峰，并得到零电压下，面积为３１４×１０４μｍ２，厚度为０３５μｍ的电容器，电容约为５６０ｐＦ，介电常数约为６００。疲劳测试表明Ｐｔ／ＳＢＴ／Ｐｔ具有优良的抗疲劳特性。     

0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷的相结构研究

利用XRD，XPS和TEM等测试手段对0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷新材料的相结构进行了研究。研究结果表明：随着BaTi4O6纤维的加入，烧结试样表面O元素的含量提高，材料中Ti^3 离子和Ti^2 离子的含量降低，材料介电性能有所提高。     

合成氯乙酸正丁酯的催化剂研究进展

综述了改性ZSM-5分子筛,有机锡,氯化铁,TiSiW_(12)O_(40)/TiO_2,CaO脱水法,锆酸酯、杂多钨锗酸等7种不同催化剂催化合成氯乙酸正丁酯的实验结果。结果表明:SO_4~(2-)/TiO_2-Al_2O_3,TiSiW_(12)O_(40)/TiO_2,SO_4~(2-)/膨润土及磷钨杂多酸14种催化剂对合成氯乙酸正丁酯的酯收率较高,具有实际应用价值。