LLDPE及其催化剂技术进展

综述了线性密度聚乙烯（LLDPE）研究的最进展情况，特别对乙烯原位聚合工艺和后过渡金属镍、钯催化剂进行了详细的叙述，对我国LLDPE的生产提出了自己的看法。     

Halogen-induced charge transfer polymerization of pyrrole in aqueous media

Simultaneous polymerization and doping of pyrrole have been carried out in the presence of a halogenic electron acceptor, bromine (Br₂) or iodine (I₂), in aqueous dispersion or in a two-phase solvent system. The morphology of the polypyrrole (PPY) so produced is granular and porous. The electrical conductivity of the PPY-I₂ charge transfer (CT) complex is of the order of 10¹ ohm⁻¹ cm⁻¹ while that of the PPY-Br₂ complex is about one order of magnitude less. Both complexes are stable in the atmosphere. The physicochemical properties of the PPY-I₂ and PPY-Br₂ CT complexes prepared under various experimental conditions are examined in detail.     

等离子炉炭热法冶炼钼铁

等离子炉炭热法冶炼钼铁是利用炭在高温下的强还原性，以炭热和等离子热代替金属热．直接得到优质钼铁。     

GaAs器件工艺中等离子刻蚀及计算机辅助监控技术研究

用Ｎ２气和ＮＦ３反应气体，在较低的刻蚀功率下实现了用薄正性光刻胶ＡＺ１５１８作掩模，均匀、快速刻蚀ＳｉＯ２，ＳｉＯＮ，Ｓｉ３Ｎ４，ＷＮ，Ｗ等材料的等离子刻蚀技术。利用到蚀过程中射频参数的变化和计算机技术，将射频参数的变化在计算机屏幕上实时显示，实现了计算机辅助监控和终点检测技术。     

微波电子回旋共振等离子体技术及其应用

微波电子回旋共振等离子体是淀积薄膜、微细加工和材料表面改性的一种重要手段。由于这种等离子体电离水平高,化学活性好,可以用来实现基片上薄膜的室温化学气相淀积和反应离子刻蚀,因此对于微电子学、光电子学和薄膜传感器件的发展,这种等离子体会具有重要的意义。此外,采用微波电子回旋共振等离子体原理,没有灯丝的离子源可以提高离子源的使用寿命,可以增加离子束的束流密度。可以确信,微波电子回旋共振等离子体的发展,将把离子源技术提高到一个新的水平。显然,这必将对材料表面改性工艺,包括离子注入掺杂等工艺的发展发挥作用。自从1985年以来,为了得到大容积等离子体而发展了微波电子回旋共振多磁极等离子体,这些技术在薄膜技术、微细加工以及材料表面改性中的应用前景是乐观的。我们将在本文中,介绍微波电子回旋共振等离子体的原理及其应用。     

新型阳离子聚丙烯酰胺微粒的研究--含PEO支链阳离子聚丙烯酰胺微粒的合成、助留性能及作用机理

本文采用反相微乳液聚合的方法合成了丙烯酰胺(AM)/丙烯酰氧基乙基三甲基氯化铵(AD-AMQUAT)/聚氧乙烯大单体(PEO-A)/N,N'-亚甲基双丙烯酰胺(Bis)的四元共聚物微粒.研究了该微粒助留剂的结构与性能.这种微粒和纸纤维能够通过离子键和氢键作用显著地增强助留效果.     

用发射天线式微波等离子体CVD装置沉积大面积金刚石薄膜

在国内首次研制成功了高气压发射天线式微波等离子体辅助化学气相沉积金刚石薄膜装置，用该装置成功地在３英寸的单晶硅衬底上沉积了Φ７０ｍｍ的金刚石薄膜。这一成果填补了国内空白，对我国金刚石薄膜研究领域的设备更新换代和开发应用具有重要意义。     

彩色等离子体显示屏中运动失真现象的研究

本文研究了等离子体显示屏在显示动态的画面时产生运动失真现象的原因，并在比较国内外各种解决方法的基础上提出了一种优化的ADS驱动方式。在优化的ADS驱动方式基础上开发的14时彩色等离子体原型样机表明优化的ADS驱动方式在视觉闪烁感和运动图像质量方面都有了很大的提高。     

Control of structure and tack properties of acrylic pressure‐sensitive adhesives designed by a polymerization process

Free radical emulsion polymerization of methyl methacrylate (MMA) and 2‐ethylhexyl acrylate (EHA) results in the synthesis of pressure‐sensitive adhesives (PSAs) with good tack properties. Management of both the copolymer composition and the polymerization process allows one to control the behavior of the PSA. Semicontinuous (SC) processes create polymer particles whose instantaneous composition is close to that of the feed particle The SC Mixture process (continuous feeding with comonomer blends) affords nearly homogeneous latex particles and PSA films. The SC Gradient process (separate feedings at inversely varying rates) affords heterogeneous particles and films. The Batch process leads to somewhat heterogeneous films, but the hard (MMA‐rich) microdomains are made compatible with their soft (EHA‐rich) matrix because of the assumed formation of tapered‐type copolymers. Tack measurements indicate the importance of the particle and film structures. Too much hardness or softness leads to unacceptable lacks of adhesion and cohesion, respectively. Homogeneous structures prove adequate, but their tack properties collapse with rising temperature. Heterogeneous structures, with extensive phase segregation, prove unsatisfactory because they lack adhesion and cohesion. Finally, the association of well‐balanced composition and compatible heterogeneity is the criterion for suitable PSA behavior. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2749–2756, 2003     

磁性聚乙烯醇缩丁醛微球的制备和性质

运用乳化复合技术制备出磁性聚乙烯醇缩丁醛微球。该微球呈珠状 ,平均粒径为10～ 2 0nm ,具有较大的蛋白质固载量 ,可作为载体对多种酶及蛋白质加以固定。并研究了磁性聚乙烯醇缩丁醛微球制备条件、吸附时间、pH值等对磁性聚乙烯醇缩丁醛微球固定蛋白载量的影响