移动IP综述

论述了移动IP的概念和发展过程，分析了国内外对移动IP研究的重点问题及其方法，对移动IP的发展方向进行了归纳和总结，并提出了有关用的问题。     

PDB-18C6对TI(Ⅰ),An(Ⅲ),Cu(Ⅱ)的吸附及从α轰击的金靶中分离~(199)TI

本文研究了用冠醚树脂二苯并-18-冠-6甲醛聚合物(简称PDB-18C6)对T1(Ⅰ),Au(Ⅲ),Cu(Ⅱ)的吸附行为。实验表明,在盐酸溶液中冠醚树脂的吸附效率顺序为Au(Ⅲ)>T1(Ⅰ)>Cu(Ⅱ)。用高氯酸和乙二醇乙醚淋洗T1(Ⅰ),Au(Ⅲ),它们的回收率一般在82-98.9％和98-100％。还在1.2m回旋加速器的外靶装置上,用25-27MeV的α粒子轰击金靶,累计束流强度为27μA·h,经处理分离后得到仅含0.50％~(200)T1的较高纯度的~(199)T1。     

V和X系列接口到E1信道的转换设计

在简要介绍了相关技术的基础上，提出了一种用FPGA实现V和X系列接口到E1信道转换的设计方案。同时根据设计要求，给出了采用ALTERA公司的FPGA芯片EPF10K10TC144设计的典型应用电路。     

IPv6过渡机制讨论

本文在简要地介绍Ngtrans工作组提出的大多数过渡机制的基础上，尝试对它们进行区分、分类，并对每一种过渡机制的优缺点进行分析。另外．还对这些机制的布置以及一部分支持这些机制的产品平台进行讨论。     

Effect of calcination conditions on phase formation and particle size of nickel niobate powders synthesized by solid-state reaction

The solid-state mixed oxide method via a rapid vibro-milling technique is explored in the preparation of single-phase nickel niobate (NiNb₂O₆) powders. The formation of the NiNb₂O₆ phase in the calcined powders has been investigated as a function of calcination conditions by TG-DTA and XRD techniques. Morphology, particle size and chemical composition have been determined via a combination of SEM and EDX techniques. It has been found that the minor phases of unreacted NiO and Nb₂O₅ precursors and the Ni₄Nb₂O₉ phase tend to form together with the columbite NiNb₂O₆ phase, depending on calcination conditions. More importantly, it is seen that optimization of calcination conditions can lead to a single-phase NiNb₂O₆ in an orthorhombic phase.     

LW15-252型SF_6断路器存在的问题和对策

国产SF6断路器已在电力系统中得到了广泛的应用,随着时间的推移,这种断路器存在的问题也逐渐地暴露出来。笔者介绍了LW15-252型SF6断路器在实际运用中存在的问题和采取的对策。     

Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

择形催化合成2,6-DMN的研究进展

介绍了2,6-二甲基萘(2,6-DMN)的制备方法,详细论述了萘、甲基萘在分子筛催化剂上择形催化合成2,6-DMN的研究进展,提出了择形催化合成2,6-DMN的研究方向。